The Mighty/Mighty+ by Storz & Bickel
- Thread starter Roger D
- Start date
Does that mean the mighty just can't hold a candle to the cloud cuz I'm blowing clouds from the same herb
I do get medicated. It's not as strong, but maybe I need to get all science on this and weigh everything out and try it in my other vapes to compare. I know vapor isn't everything anyway, but it makes me sad that you all have clouds for days and I'm lucky to squeak out even one.
MGG
Well-Known Member
Does that mean the mighty just can't hold a candle to the cloud cuz I'm blowing clouds from the same herb
I do get medicated. It's not as strong, but maybe I need to get all science on this and weigh everything out and try it in my other vapes to compare. I know vapor isn't everything anyway, but it makes me sad that you all have clouds for days and I'm lucky to squeak out even one.
I have a cloud and i definitely think the cloud is better but i mean what did you expect for a portable vs a desktop unit, I have a friend with the mighty who's pretty convinced they are on the same level with the easyflow 18mm adapter but imo it's not on the same level but it's pretty close (which is damn impressive for a portable)
I find it get extremely medicated on the mighty which I think is due to the large bowl size and also the direct draw system compared to filtering it through water like you do with the cloud.
I'm going to post some mighty videos once I get my easyflow adapter, with the ratchet adapter we were white walling fairly decent sized pieces with ease so i'll show you guys what the mighty is capable of soon enough.
I found the main issue with not getting big enough vapor loads was due to not packing enough in the machine, it reccomends if you dont pack enough to squish it down with the oil pad. It needs a tight pack imo to truly shine.
vapological
Member
This is insane to me cuz I might only get 1 or 2 visible clouds at a certain temp before having to move up to extract more. I feel like it's not my herb cuz I can take the ABV from my mighty, put it in my cloud+ and get milky clouds for far longer and that's not even fresh herb.
Dunno if mine's not actually heating up to what it says or what
The unit is pretty hot by the end. I eventually crank it to 410, so I dunno wth is up
First, i'm not using any glass, just mighty to mouth.
second, if I were you, after clean as new, replace screens, check again.
then i would try Different herb. but it sound very weird, because where i'm from i don't have such a variety of the herb, and when i have proper herb the unit is happy, very happy.
clearly something is wrong with your unit if the cloud milk your ABV as much, but i don't own a cloud.. check some vids ppl uploaded before and compare this to your experience.
Last edited:
Hi_I'm_High
New Member
For what it's worth because of my business, I'm now getting spam from vaporizer and E-cigarette manufacturers in China trying to sell me shit. I noticed last week the Vapefiend adapters for sale from a chinese manufacturer at very low cost. I'm sure that's why the quality standards are so low. Hell they probably based the design off a knockoff Mighty
Still working on my CU-Mod SonG for the Mighty, but it should be finished soon! Had to rebuild the damn print-head on my 3D printer 5 times over the past two weeks but I finally managed to print a new SonG mold! Hopefully this 4th revision will be the winner - wish me luck
Good luck Ratchett, I have complete faith in you. I'll be purchasing one as soon as you have it ready!
Stinky
Well-Known Member
That's all good mate.Ahh sorry bud I misread things a little, I thought you were posting what people were saying on reddit, not that you had bought it and had problems, my bad, I also now see that you were talking about the mouthpiece not the wpaagain my bad, my head can be a pretty messy place at times.
I also have the glass MP but mine has never fell out, it does add a little restriction though, maybe it's just the company 'easy flow' as I have the Arizer air bubbler stem made by them and the quality is questionable.
Again sorry for the mix up
diddymao
aint no party like a diddy party
Regarding the vapefiend water adapter:
i`v been kinda skitzo with this thing,
hated it
loved it
hated it again
now i think i have cracked it
A lot of people are complaining about the device not giving out big old clouds or "whitewalling"
in my opinion i think the problem is the fact that the space between the bottom of the adapter screen
and the top of the herb is to big, allowing the weed to fly about and not stay compact as it does when the cooling unit or muzzmod is attached to it.
My "hack" is to put one of the oil pads into the gap between the bottom of the glass and the screen(hey the screen may not even be needed) this keeps the herb compact, takes a slightly harder toke but im getting my clouds!!!
Long winded but i hope you all feel me
(posted this in the crafty thread as well as i thought it was relevant )
i`v been kinda skitzo with this thing,
hated it
loved it
hated it again
now i think i have cracked it
A lot of people are complaining about the device not giving out big old clouds or "whitewalling"
in my opinion i think the problem is the fact that the space between the bottom of the adapter screen
and the top of the herb is to big, allowing the weed to fly about and not stay compact as it does when the cooling unit or muzzmod is attached to it.
My "hack" is to put one of the oil pads into the gap between the bottom of the glass and the screen(hey the screen may not even be needed) this keeps the herb compact, takes a slightly harder toke but im getting my clouds!!!
Long winded but i hope you all feel me
(posted this in the crafty thread as well as i thought it was relevant )
Last edited:
Sorry, forgot to mention that I always use the oil pad if it's not a full bowl. I've also used an extra screen on top. I guess I gotta experiment more.
You're getting visible clouds no matter the light? I know depending on the angle it can show up more, but like I said I get them with the cloud and you're seeing them no matter the light.
MGG
Well-Known Member
No sorry that wasn't clear, I find it needs a good tight pack for the best clouds. I still get legit clouds from small packs and pushing it down with the oilpad though.
Cloud is definitely better imo but the mighty is close.
Mr. Me2
Well-Known Member
And I use a screen with a wedge cut out in place of the pad. I used to use the pad and much prefer the screen method.
I'll try just pressing it down super tight, thanks
Headless1916
New Member
I heard back from S&B today about my two defective Mighty units; they are shipping out replacements for both tomorrow. They arrived on Monday, so < 5 business day turnaround from them on this; i'd say that's about as painless as one could reasonably expect for a replacement process.
I'm excited; I was so disgusted by smoking after vaporizing for most of this year that I went and bought a Plenty to tide me over while my Mighty's were out. It's amazing how some herb that tastes absolutely fucking amazing when vaporized tastes pretty much like shit when smoked.
I really like the Plenty (holy crap, the intensity of effects from it are insane) but it's funny, I think the Mighty in a lot of ways is a more satisfying experience because of the differences in how quickly the herbs vaporize. Looking forward to comparing both directly
I'm excited; I was so disgusted by smoking after vaporizing for most of this year that I went and bought a Plenty to tide me over while my Mighty's were out. It's amazing how some herb that tastes absolutely fucking amazing when vaporized tastes pretty much like shit when smoked.
I really like the Plenty (holy crap, the intensity of effects from it are insane) but it's funny, I think the Mighty in a lot of ways is a more satisfying experience because of the differences in how quickly the herbs vaporize. Looking forward to comparing both directly
vapviking
Old & In the Way
I'm new here, but I think you've brushed right up near the spirit of this whole Forum.
CroZure
Well-Known Member
My mighty arrived 4 days ago and I am very impressed with this vape so far. I have been an every day volcano user for a while now and I needed something more discreet for daytime vaping. The vape clouds are every bit as good as the volcano, if not better. However, the Mighty doesn't come anywhere close to it when comparing taste. But I will say that I own a Haze too and the Mighty taste better than the haze. I am coughing some with the Mighty and I never used to cough with the volcano. So far I am pleased with my purchase.
One question though, what is the maximum internal temperature that the device be at in order to charge it? I find myself vaping, then walking awaywithout being able to charge it b/c the vape needs to cool down. Then I come back and want to vape again.
One question though, what is the maximum internal temperature that the device be at in order to charge it? I find myself vaping, then walking awaywithout being able to charge it b/c the vape needs to cool down. Then I come back and want to vape again.
skyvaper
Well-Known Member
I find the volcano distributes flavor throughout the session. When using the mighty however I feel like its a burst of flavor. I enjoy them both but I find when I want to test a new flavor profile the mighty is my go to. Again both are EXCELLENT in the flavor department.
spoutti
Well-Known Member
About using the oil pad for smaller loads. I think its better if you cut the oil pad thinner to not put pressure on the top fins holding the cu in place. I felt more pressure when screwing the cu if I put as little as maybe 0.05g + full size oil pad. I feared it would lead to the common top fins broken problem if I didnt thin the oil pad.
So I place a screen on top of my load if full, or a thinner oil pad for small doses. I feel I dont get any herbs particules in my cu with covered loads
So I place a screen on top of my load if full, or a thinner oil pad for small doses. I feel I dont get any herbs particules in my cu with covered loads
BioSector
Well-Known Member
Took a picture tonight that shows how many care packages I've received. Got a tracking number for my Mighty that is on the way back for a 2nd time. Not pictured are the 5 complete cooling units for each Mighty and Crafty as well as the muzzmod and ratchet adapters. 
To be fair, some of that is legit purchases of wear and tear kits.
To be fair, some of that is legit purchases of wear and tear kits.
diddymao
aint no party like a diddy party
over heating?
Mr. Me2
Well-Known Member
I'd email S&B about that...
Tex
Well-Known Member
Hey fellow Mighty users! A friend of mine with a 3D printer (also a Mighty owner) designed and printed himself a nice stand for the Mighty. It holds the Mighty, cleaning brush, and the Muzzmod adapter all in one. I'm going to have him print one off for me, and he also emailed me the file he used to print the piece if anyone out there with a 3D printer is interested. I'm not sure if something like that is Ok to share here so I just wanted to check before I posted it.
Headless1916
New Member
My second unit died due to 004 error. It happened once, 2 weeks before the unit died...then again 1 week before, then it just stuck on 004 all the time. If you've started getting err 004 intermittently, your unit is probably on the way out.
StRaNgEcLoUdS
Well-Known Member
Does anyone know where I can purchase a replacement cooling unit o ring without having to buy a whole set? Mine is partially shredded And I believe that it is affecting performance. Any help would be greatly appreciated!