The Mighty/Mighty+ by Storz & Bickel

[justcametomind]

As someone recently suggested, I clean the cu after having disassembled it in 2 pieces + mp, and soaking everything in iso whit O-rings and screen still on.
Works a charm, just have to remind yourself to rinse after 20 minutes.
I left it some hours the second time and the bigger O-ring has become wider (I was warned). This is great to know since having to disassemble every tiny piece was quite boring to me.

 

[skyvaper]

Id say LESS is more with the soaps. Ive used soap and warm water and could taste the soap during the session. This may just be my experience so salt.....grain

And I did rinse very well and iso wiped and did a burn off in case anyone was wondering.

I just iso soak for a min of 30 min (max was 2 hours with no discolor or anything but I wouldnt recommened this as its not needed) and rinse with hot water.

 

[samples world]

Most people that report these issues find out that their CU's weren't as clean as they thought. After a thorough clean they tell us that the unit is functioning like new again.

Try soaking your CU in ISO for 30 mins and see if it helps.

Okay I'll give this a try and report back after my next sesh. Thanks!

 

[Stinky]

Like biohacker said, I find that I get a lil more resistance when I pack dense, but nothing like the pax.

Edit: does anyone know how to get the orings clean without ISO?

They are hard to clean even with ISO. Mine always end up sticky.

 

[biohacker]

I've had both Mighty's for a while now, and coming from the Crafty (used maybe 30 hours), and for some reason I have never, not even once taken off the o-ring around the heater bowl, as well as the o-ring around the stem of the mouthpiece. I just don't see any reason to remove and clean them? What for? How would they even get dirty?

 

[canj00digit?]

I just wanted to say I have been re-impressed by the Mighty all over again when I needed it on the go very recently. My desktop daily (all day) is now a Sublimator, and I had a fair tolerance before the Sub came into my life. Even though I big hit all day every day, the Mighty is still able to more than satisfy me on the go and even make me go 'whoa' occasionally.

My current weapons of choice:

 

[adam_baumm]

Hi all , I was wondering what temperatures people are using? I have a mighty and depending on material. I am going like 200 c to 205c or 205c to 210c.

 

[mitchgo61]

Hi all , I was wondering what temperatures people are using? I have a mighty and depending on material. I am going like 200 c to 205c or 205c to 210c.

Start at 185, by the time I get to 205 everything is usually extracted. 95% of my extraction occurs between 185 and 200.

 

[olysh pops]

My habit is 180°C/356°F then 195°/383°F and then 210°C/410°F

If I want flavor I stay between 165°C/329°F and 180°C/356°F

 

[adam_baumm]

Hi olysh, are you using any glass? and how dry/ground or not is your material?

 

[olysh pops]

I do not use any glass with Mighty

Material is not too dry (make no dust when I grind) and not too wet (no problem to smoke if I would)

My material is well grinded, I use S&B grinder and upside down it during grinding. I only grind one time, at the beginning.

If I want flavor I can grind 2 time , one at the beginning with S&B grinder and then at the middle of session with MFLB grinder; but it's not common with Mighty, more often with desktop vape.

 

[ginolicious]

My habit is 180°C/356°F then 195°/383°F and then 210°C/410°F

If I want flavor I stay between 165°C/329°F and 180°C/356°F

The high is better with higher temperatures haha. The sacrifice. Flavor and less noticeable vapor at a lower temp or a stronger body high and less taste haha.

 

[Pyr0]

Just spotted a glass mouthpiece for the Mighty/Crafty on the frontpage of Vapefiend.co.uk and had to order one to try (and a Jyarz Chico)
http://www.vapefiend.co.uk/crafty-p...path=crafty/mighty-easy-flow-glass-mouthpiece

Update:
Don't waste your money on this.
Received it today and it has more restriction than the standard mouthpieces.
No idea how they have the nerve to call it an "Easy flow".

 

[bigmouth]

Update:
Don't waste your money on this.
Received it today and it has more restriction than the standard mouthpieces.
No idea how they have the nerve to call it an "Easy flow".

D'oh... thanks for taking one for the team!

 

[Pyr0]

It's not a massive difference, but if airflow is important, I wouldn't bother.
It feels nice on the lips, being smooth glass, but it is slightly fatter and unfortunately it doesn't lock into place and seems to need pushing back in every time it's swivelled.
I think I'm probably just going to stick with the standard mouthpiece.

 

[Bravesst]

GLASS MOUTHPIECE:
Tried it myself, kinda defeats the whole purpose of the cooling unit and stealth mouthpiece. If you want a glass stem, go with a different product (Solo, Air, Nano)... M1ghty hits great out of the box, and tastes just as good, even without glass.

 

[Stinky]

Update:
Don't waste your money on this.
Received it today and it has more restriction than the standard mouthpieces.
No idea how they have the nerve to call it an "Easy flow".

That sucks. Mine is on its way over from the UK.

GLASS MOUTHPIECE:
Tried it myself, kinda defeats the whole purpose of the cooling unit and stealth mouthpiece. If you want a glass stem, go with a different product (Solo, Air, Nano)... M1ghty hits great out of the box, and tastes just as good, even without glass.

Did you use the same foldable stem we are talking about or the repurposed MFLB stem?

 

[Bravesst]

no... excuse me, my stem didn't fold.

 

[Pyr0]

That sucks. Mine is on its way over from the UK.

Sorry
Fingers crossed it's just this one.
If I look into the neck, where it joins to the main mouthpiece part it seems to narrow slightly.

[edit]
The neck starts out at over 3mm (I can wiggle a 3mm screwdriver), but narrows to 2-2.4mm at the join.

 

[Stinky]

Sorry
Fingers crossed it's just this one.
If I look into the neck, where it joins to the main mouthpiece part it seems to narrow slightly.

[edit]
The neck starts out at over 3mm (I can wiggle a 3mm screwdriver), but narrows to 2-2.4mm at the join.

Sounds like it was poorly designed

 

[macbill]

Goof Off or Gunk Off will cut the crap.

 

[saucybx]

Got my Mighty in February and absolutely loved it. Starting having issues with the housing cracking and breaking around a month later but it didn't affect performance so I kept it. Finally last week, my charger cord became positional so I sent the unit and charger back last Thursday. Got it back today. Same box and unit but with different, more reinforced housing than I originally had. Looks nice, feels a lot more sturdy. Everything seems legit but they neglected to send back my charger so I don't even know if that issue has been solved. I contacted S&B via email to inform them so now all I can do is continue to wait. Another week without my Mighty -- I could scream but I came here to vent instead. Thank you.

 

[Quetzalcoatl]

Got my Mighty in February and absolutely loved it. Starting having issues with the housing cracking and breaking around a month later but it didn't affect performance so I kept it. Finally last week, my charger cord became positional so I sent the unit and charger back last Thursday. Got it back today. Same box and unit but with different, more reinforced housing than I originally had. Looks nice, feels a lot more sturdy. Everything seems legit but they neglected to send back my charger so I don't even know if that issue has been solved. I contacted S&B via email to inform them so now all I can do is continue to wait. Another week without my Mighty -- I could scream but I came here to vent instead. Thank you.

nowhere local that can sell you a charger?? could call a few headshops around if it's within a reasonable distance... sure beats a week.

 

[saucybx]

Great idea I'll let you know what happens.

 

[WakeAndVape]

Got my Mighty in February and absolutely loved it. Starting having issues with the housing cracking and breaking around a month later but it didn't affect performance so I kept it. Finally last week, my charger cord became positional so I sent the unit and charger back last Thursday. Got it back today. Same box and unit but with different, more reinforced housing than I originally had. Looks nice, feels a lot more sturdy. Everything seems legit but they neglected to send back my charger so I don't even know if that issue has been solved. I contacted S&B via email to inform them so now all I can do is continue to wait. Another week without my Mighty -- I could scream but I came here to vent instead. Thank you.

And if you call them and tell them you don't have a charger and make a fuss, they have the ability to next day ship you one too