The Magic-Flight Box
- Thread starter magicflight
- Start date
Just wanted to say hello.
I just signed up here & just got my box. Now all I need is for my state to pass MMJ since they tabled the bills in early 2012. But NORMAL thinks it looks promising since the Nov elections have changed things. New to vaping and loving it. Also new to medicating and amazed I havent tried it sooner. I needed it for the past ten years of suffering. I was a fairly regular smoker many years ago in college and for about 8 -10 years after but gave it up due to family & career. Rediscovering it has been a lot of fun & medically beneficial. Still have to keep it from my kids though. Although i think they might see the benefit vs the deadly narcotics Ive been prescribed like candy for the past 10 years. Here's to not needing them as much and hopefully rid of them for good.
Great forum!
Vixxis
I just signed up here & just got my box. Now all I need is for my state to pass MMJ since they tabled the bills in early 2012. But NORMAL thinks it looks promising since the Nov elections have changed things. New to vaping and loving it. Also new to medicating and amazed I havent tried it sooner. I needed it for the past ten years of suffering. I was a fairly regular smoker many years ago in college and for about 8 -10 years after but gave it up due to family & career. Rediscovering it has been a lot of fun & medically beneficial. Still have to keep it from my kids though. Although i think they might see the benefit vs the deadly narcotics Ive been prescribed like candy for the past 10 years. Here's to not needing them as much and hopefully rid of them for good.
Great forum!
Vixxis
Quetzalcoatl
DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
You're not alone! Loads of us here have successfully used the LB to cut off our medications. I myself have 5 active prescriptions right now, and medical helped me cut down to 2, maybe 3 if I really need it. Other than that, .125 of delicious dank indica in the trench seems to fix me up for a few hours.
Nycdeisel
Well-Known Member
A few things I want to say in this post. First I want to say i dont remember seeing the "shorty" wooden stems before but I will definitely be needing one of those!
Next, how does one go about cleaning the wood stems. Yeah I know how wood is haha but I do remember Vito mentioning a method of his to clean them somehow. Care to share?
Finally, I would like to say I have tried the original MFLB WPA and it really wasnt very good at all(in fact, I could say worse things about it but Im not here to bash their first design!) but that the NEW one^ up there looks encouraging!!!
The tubing they provide is silicone, correct? Also, might someone be so kind as to share the dimensions of the tubing they use. Thanks everybody. Off to hit my MFLB again, Cheers!
Next, how does one go about cleaning the wood stems. Yeah I know how wood is haha but I do remember Vito mentioning a method of his to clean them somehow. Care to share?
Finally, I would like to say I have tried the original MFLB WPA and it really wasnt very good at all(in fact, I could say worse things about it but Im not here to bash their first design!) but that the NEW one^ up there looks encouraging!!!
The tubing they provide is silicone, correct? Also, might someone be so kind as to share the dimensions of the tubing they use. Thanks everybody. Off to hit my MFLB again, Cheers!
poonman
Well-Known Member
Nice ,
How much is it ?
It also said at the end ...available at our local shops ...also very nice .
Hi,
If you you read this in time, you might get one for free. As part of a giveaway we're running on Twitter, Facebook, and Reddit we allocated 25 Water Pipe Whips to be given away to the members of Fuck Combustion. Just fill out the attached form with your mailing information and FC username to be included in this giveaway. The form is set to automatically close after 25 submissions, so if the form is accessible, you're still in the running! Good luck!
-- Magic-Flight
This is the link: http://mflb.it/wpwfc
paytonpenn
Level 30 Nature/Healer
30 dollars in each 3 different colors.
HSIHP
Well-Known Member
I think I am very interested in this as well. Right now I use an old piece from my SSV connected to the end of the whip that creates an airtight seal with my little bong. It works but this seems like exactly what I would want! And look at that, it's cheaper than the regular WPA!
Edit: Just saw that add for the free whip! Good luck FC'ers and thank you Magic Flight!
BigDaddyVapor
@BigDogJunction
BOOYAH!
Cloudlight
Well-Known Member
Just signed up for one of those whip adapters, looks like a great addition to my setup. Thanks MF.
Quetzalcoatl
DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
FUCKING YESSSSSS
I WIN
I WIN
banana_republic
Well-Known Member
Well, thanks a lot! I hope I got it just in time, as far as the form is already live and I could fill in and submit my data.
Thanks a lot Magic-Flight, you absolutely deserve our love!!!
BigDaddyVapor
@BigDogJunction
I think I should get credit for the whip adapter. OF's been getting a lot of attention lately, same with Vicki. Q, well... that's a given. Paka, Vito...
I'm like the odd man out lately. So dammit. It was my idea!
I'm like the odd man out lately. So dammit. It was my idea!
Quetzalcoatl
DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
Where've you been?? I was wondering if you were just getting too silly with the new glass you got and the HI/VB/LB combo or if you were doing something... secretive 
BigDaddyVapor
@BigDogJunction
Lol! Me secretive? You read the med sub-forum and are well-aware what a nut I am.
Just a LOT of @$&# going on. Lot of different directions pulling. Plus, every time I pop in here... My evil nemesis... or am I the evil one? Hmmm... ??
Anyway... he's always in here answering some question. Helping some person out. Dropping witty one-liners. Information, good-nature, with a dose of sarcasm that usually whooshes over the head of intended.
Sigh... I'm obsolete. I've been replaced.
Oh yeah... I know a few things to. I could tell you, but then I would have to kill you.
Just a LOT of @$&# going on. Lot of different directions pulling. Plus, every time I pop in here... My evil nemesis... or am I the evil one? Hmmm... ??
Anyway... he's always in here answering some question. Helping some person out. Dropping witty one-liners. Information, good-nature, with a dose of sarcasm that usually whooshes over the head of intended.
Sigh... I'm obsolete. I've been replaced.
Oh yeah... I know a few things to. I could tell you, but then I would have to kill you.
PDwasmy1st
Well-Known Member
I read this first graph as taking 22.5 seconds not 5 seconds as you state or if im going from right to left 7.5 secs is that right thank you.Hi,
It is possible to use the Box to try to separate out different components while in use. However, the Box itself was not really designed for that process -- actually the opposite is somewhat more the case. To get just one component at a time, a desktop unit would probably be a better choice, even though there are none on the market now that have anywhere near the accuracy that would be needed. To really do this right, you would need lab gear.
In regards to your other questions, I have included some information below which I think will be particularly helpful. I have been wanting to post the following information/graphs for some while now. I was finally able to get the legal release necessary since the following test results are usually considered to be for "internal use only" within our company.
Note: All tests below were performed with a freshly charged stock battery. The graphs were taken from our unit calibration test bench PC which is fitted with an infrared imaging system specific to our manufacturing process. The measured temperature is that which would be found at the exact contact surface of the very bottom of the screen trough, and thus represents the real operating conditions within the Box chamber while in use.
This first graph shows how quickly the Launch Box heats up and cools off. In this test, power is applied to a fully cold box for exactly 5 seconds under no draw conditions. You can see how quickly the unit rises to the required temperature. These measurements, typical to our units, is the physical basis of our claim "From cold to 385F in under 5 seconds!".
Trying desperately to get the hang of this product.
MM..Food
vape enthusiast
Seeing this new Water Pipe Whip reminds me of something I made a while ago with my mflb whip and a zap stem. If you have a zap stem (gong shorty is the best) you can make your own whip adapter for bongs by putting the end of the whip over the stainless steel tip and you're set!
Anyways it's good to see Magic Flight doing what they do the best! Awesome giveaway for your customers!
Anyways it's good to see Magic Flight doing what they do the best! Awesome giveaway for your customers!
OF
Well-Known Member
I think I should get credit for the whip adapter. OF's been getting a lot of attention lately, same with Vicki. Q, well... that's a given. Paka, Vito...
I'm like the odd man out lately. So dammit. It was my idea!
Since there's a whip involved I expected everyone to automatically know you were there?
Same goes for leather I understand?
I also wouldn't get too upset about Vicki getting top billing, face it bro, she looks better in heels.....at least from some angles.
Great to have you around keeping the heavy stuff from sinking to the bottom of the pot. Takes a lot of stirring sometimes, teamwork you know, that's the solution.
OF
poonman
Well-Known Member
Hi,
If you you read this in time, you might get one for free. As part of a giveaway we're running on Twitter, Facebook, and Reddit we allocated 25 Water Pipe Whips to be given away to the members of Fuck Combustion. Just fill out the attached form with your mailing information and FC username to be included in this giveaway. The form is set to automatically close after 25 submissions, so if the form is accessible, you're still in the running! Good luck!
-- Magic-Flight
This is the link: http://mflb.it/wpwfc
What's that famous saying ?
You snooze ...you LOOOOOOOOOOOOOSE !
Plus this is probably the only time , I wish I had joined FB or Twitter .
But at $ 30 ,
Quite the value for water accessory attachment .
Maybe $ 40 at my LHS , sometime soon .
And it looks like the standard 14 mm attachment ?
or
Is there an 18 mm also ???