JDSupreme
Head of Pot
hemp;)goofy8cheerio said:4 very fine a $20 coffee grinder werks well
Walmart sells a Hamilton Beach coffee grinder for $15. It works great!
hemp;)goofy8cheerio said:4 very fine a $20 coffee grinder werks well
Lo said:Okay... I finally got my fancy schmansy charger in... The C9000, got some of the Powerex's with it too.
Anyone know which is who and what MAH I should tell the charger - it wants specifics lol!
Ooh, one more question. Reading the manual it says it will ask me the charge rate to use for regular charge. I see an example of 2700 mah batteries with 0.1C or 270mah ?? Would this be the setting?? The new powerex's are 2700 mah but not sure about others.
Thanks in advance for any info
wanderer46 said:Got a question about herb grinders (space case/chromium crusher/etc)... do they grind herb fine enough for the MFLB? What's your experience?
chester said:Hey guys, I bought my magic flight about 3 months ago and it works great, but the trench has developed a yellowish color to it. Is this normal or did I accidentally combust and not know it? What happens when you combust and what would it look like/do to it? I love the MFLB btw it was definitely worth every penny!
chester said:Hey guys, I bought my magic flight about 3 months ago and it works great, but the trench has developed a yellowish color to it. Is this normal or did I accidentally combust and not know it? What happens when you combust and what would it look like/do to it? I love the MFLB btw it was definitely worth every penny!
MichMartin said:With this vaporizer there is a lot of pushing the battery in and out.
To make it work you have to push the battery.
I tried just now with the different batteries I have and you don't have to push that hard at all.
It is less of a push then crushing a grape.
I just tested with the differenct batteries I have.
vtac said:I put a new MFLB on a scale with the stock battery in place and pushed until the light came on. Averaged 1250g.
Not sure how much help that is.
Mcyamo said:I bought my LB early this year, and it has since become an everyday harbinger of happiness.
Today, however, my plastic cover has cracked a little bit, and I was wondering how to contact MagicFlight to get a replacement, as I fear it may worsen and render the device inoperable. The problem is not serious yet, but I figure this should be a relatively easy replacement. Is Magic Flight out there? Is this problem covered by warranty?
I believe I read somewhere earlier in this thread that it is just a random number, not even necessarily 6 digits, for them to keep track of units, and has nothing to do with when it was produced. Be sure to keep your digits safe though, you need it for getting a warranty replacement! On that note, BlissSville just shipped out my replacement box and charger. EXCEPTIONAL CUSTOMER SERVICE!I was wondering if this is a serial number or an actual production number?
I've been using my MLFB for a bit now and I love it.. i've been experimenting with various methods and I found this works the best for me and gives me pretty much an even brown AVB.
1. Make sure your bud is all ground up nicely and there are no stems and stuff inside. The consistency you should be going for is maybe like the size of regular kitchen sugar or salt for the best hits. The vape will work just fine if its not that consistent, but it is what you should be aiming for.
2. Get all the weed into the trench carefully. I usually use the brush it came with coz sometimes dank can get really sticky with your fingers.
3. I usually spend a couple of seconds tapping the box gently after getting the bud in to just make sure it's all shaped nicely and there aren't any loose gaps and stuff. After you're done doing that and your trench looks nice and neat, put in a fully charged battery.
4. Wait for a few seconds before you begin inhaling. How many, time will tell. I usually wait for 2 seconds on a fresh battery, 3-5 if its a used battery. The more you vape, the better youl'll be able to judge how long to wait.
5. Keep inhaling slowly until your lungs are about 80% full. You should ideally IMO feel a nice warm vapor coming through. If you can't, inhale slower. If it's too hot, inhale faster. Eventually you'll find that perfect amount of pressure to use.
6. When your lungs are almost 80% full and you're almost done taking a hit, remove the battery and continue inhaling a little quicker for 1 or 2 seconds. After that, take off the launch box and inhale fresh air deeply into your lungs until they are 100% full. This will push the vapor deeper inside your lungs and also give you some oxygen After this, hold your breath for as long as you can.
7. When you can't hold your breath any longer, let out a little bit of air and immediately inhale fresh air quickly to replace it until your lungs are back to full capacity and hold your breath.
8. Repeat step 7 atleast twice until there is no/barely any visible vapour upon exhaling.
8.5 Enjoy that awesome deep hit, seriously lol vapour fucks you up like no other
9. Shake the box around a bit if you're taking another hit to mix the herb around. If you want, after the first 2-3 hits you can dump all the weed out of the trench onto some paper and something and grind it some more between your fingers before filling it all back. Should give you better hits.
I find this method maximizes efficiency and also minimizes odour. I'm loving this vape, i've been getting high at places I wouldn't even have imagined possible. The great before AND after-sales service and lifetime warranty pretty much seals the deal.
Have fun vaping XD It's almost like a daily ritual haha, all the grinding and charging batteries and collecting AVB and shit.
Oh yeah, above all don't worry so much about all the techniques and shit, it'll come with practice. Just enjoy the vape and this beautiful herb
DeepFried said:Lo said:Okay... I finally got my fancy schmansy charger in... The C9000, got some of the Powerex's with it too.
Anyone know which is who and what MAH I should tell the charger - it wants specifics lol!
Ooh, one more question. Reading the manual it says it will ask me the charge rate to use for regular charge. I see an example of 2700 mah batteries with 0.1C or 270mah ?? Would this be the setting?? The new powerex's are 2700 mah but not sure about others.
Thanks in advance for any info
I have the same charger and batteries, the following info is from the maha site.
http://www.mahaenergy.com/store/mhc9000faq.asp
The recommended charging current is 0.5C, or 0.5 times the battery capacity. The recommended discharging current is 0.25C, or 0.25C times the battery capacity. Here are some settings for common batteries:
2100mAh Charge: 1000mA Discharge: 500mA - all stock magic-flight batteries including eneloops
2700mAh Charge: 1300mA Discharge: 700mA - your new Powerex 2700mAh batteries
In the future for normal charging just place the batteries in the charger and if you don't touch any buttons for 10 seconds it will default to start charging at 1000mA. For the Powerex 2700's you can boost the current up to 1300mA for a faster charge, but it is not necessary.
For unknown batteries, none will be less than 2000mAh so just pick the settings for the 2100mAh above to stay on the safe side and sit back, relax and "hit the trenches" while your new charger goes to work for you.
Vicki said:Thank you for this information, I'm going to need it. I'm going to order one of the C9000's tomorrow morning. I hope I'm not disappointed.
Trakteur said:Vicki said:Thank you for this information, I'm going to need it. I'm going to order one of the C9000's tomorrow morning. I hope I'm not disappointed.
Will you please post your impressions once you get it?
I'd like some real and serious opinions before deciding to buy that charger or not
Trakteur said:Vicki said:Thank you for this information, I'm going to need it. I'm going to order one of the C9000's tomorrow morning. I hope I'm not disappointed.
Will you please post your impressions once you get it?
I'd like some real and serious opinions before deciding to buy that charger or not