Glad to be able to help, did notice your Latin accent, I am in Mexico
TETRAx
- Thread starter funkyjunky
- Start date
GoldenBud
Well-Known Member
VTC dual works like a charm. great! cruising like the old times 
(added 0.009 to sticker's resistance)
pure taste effects and experience so far with the dual-which-is-now-single
thanks again @acstorfer , both GEN3 and non-supported mod didn't work with TCR. it works muuch better than wattage mod ofc!
btw the ABV is still pretty bright .. still
(added 0.009 to sticker's resistance)pure taste effects and experience so far with the dual-which-is-now-single
btw the ABV is still pretty bright .. still
Last edited:
average_joe
Well-Known Member
I couldn't get a Tetrax today 
.... So sad... Hopw there's another Tetrax drop soon.
.... So sad... Hopw there's another Tetrax drop soon.
gingerbier
Space Ranger
It seems like there have been more units available and more drops since Ralph started doing acrylics and more premade. Drops are stressful, don't get discouraged.I couldn't get a Tetrax today
average_joe
Well-Known Member
Thanks for your words, im actually trying to get a second one and got late because of a family matter for the drop today and needed to do some catharsis here but on the happy side someone else got a Tetrax today and will love it as much as I love mine.
.
downer0420
Active Member
Just got a Wismec Predator mod but I can’t find the files for any Wismec devices on the Lamart site. What am I missing?
downer0420
Active Member
My blind self had never updated firmware in a mod before, was making things more complicated than they needed to be. I kept overlooking the bin file at the top of the page. Absolutely loving my TETRAx (currently connected to a Predator 228).
Guys, help needed please. The last two days somehow my unit will not warm up to cruise anymore, the coils go straight into burning red mode. My eyes are not noticing anything wrong in the settings, and I'm on page 72 in the P80 thread and haven't found anything describing that yet. Thanks alot.
CanikUser19
Trenchtown Rock
Have you tried it on a different mod yet? Sounds like a mod software issue, maybe a reset of the software is needed.
No, it's on a P80 and warm to cruise has always been working, I believe I just clicked, or inadvertently did change something in the settings but can't figure out what.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I would say reset your device to stock then? Reupload tubo firmware
In all honesty, I'm at the age where computers always do something that I did not tell it to do no matter what the darn thing tells me, lol..........I'd rather just manual warm it for the time being. Someone at some point will have this problem, I'm not in a huge rush with this one.......right now my bigger problem is with the Tahoe OG I just sent through it............bleh!.......will give this strain to neighbor. It'll eventually come back to me with some awesome SPICY
G4 strain when his harvest time comes.
acstorfer
Take My Money Dammit!
Is it possible you changed the resistance doohickey inadvertently?In all honesty, I'm at the age where computers always do something that I did not tell it to do no matter what the darn thing tells me, lol..........I'd rather just manual warm it for the time being. Someone at some point will have this problem, I'm not in a huge rush with this one.......right now my bigger problem is with the Tahoe OG I just sent through it............bleh!.......will give this strain to neighbor. It'll eventually come back to me with some awesome SPICY
average_joe
Well-Known Member
Hello I want to leave my experience about a Mod that was not working properly and it was affecting the Tetrax. It will show a screen showing the coil reading was wrong, it will not heat up, it will only heat up when pressing the button all the time, it will read the coil wrong and change it even when its locked, it will heat up for a minute only when cruisin, the power shows 1w all the time even when pulling hard, all that was going on with my Cuboid 200, not sure yet whats the issue (connector or device) but I got a new Wismec Reuleaux rx gen3 dual and its working great again with not a single issue. So if any of this happens to you, it might be a faulty Mod and not related to the vape. I tried flashing the TUBO again and this didnt fix the issue, not sure how to factory reset it to see if that works.
Love the Tetrax like day 1 and it has become the top portable vape for all my friends, most common quote "the flavor is insane"
Love the Tetrax like day 1 and it has become the top portable vape for all my friends, most common quote "the flavor is insane"
Ordered two amaze coolers and they just arrived yesterday. Quite possibly just saved me from contemplating selling my TetraX. I was having the hardest time with my TetraX, I can't say this for sure, but I think it may have been the wide open draw. Not too sure though, my Stempod is wide open and I have a much easier time with that.
So I ordered the coolers to (hopefully) work as a mod for a couple other vapes, didin't even order them for my TetraX. Stuffed both of 'em into a Lamart long stem (holy shit, these are looooooooooong, lol) just to see how much cooling they gave off.......still had no intention of keeping them in there, buuuuuut.....................wide open draw no more!!!! Could I have been any blinder about putting these coolers into a glass stem that they were made for.......duh! Anyways, after one night of use I think I just saved my TetraX. Need to order some more now for what I originally intended them for.
Does anyone know if when Ralph's on break if you can still order accessories, or are all operations halted?
So I ordered the coolers to (hopefully) work as a mod for a couple other vapes, didin't even order them for my TetraX. Stuffed both of 'em into a Lamart long stem (holy shit, these are looooooooooong, lol) just to see how much cooling they gave off.......still had no intention of keeping them in there, buuuuuut.....................wide open draw no more!!!! Could I have been any blinder about putting these coolers into a glass stem that they were made for.......duh! Anyways, after one night of use I think I just saved my TetraX. Need to order some more now for what I originally intended them for.
Does anyone know if when Ralph's on break if you can still order accessories, or are all operations halted?
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
You can order accessories, but they won't ship until he is back from holiday
Quick question about the tetraX. Does any mod that accepts ArcticFox work with the Tubo software? I ask because I’m contemplating grabbing a tetraX to compliment the p80 and have a 3 battery mod I could use to power it (like the idea of 3 batteries as the p80 seems pretty power hungry)
GoldenBud
Well-Known Member
only these mods are supported (credit lamart.ch )
firmware supported box mods
Joyetech
eVic VTC Mini
eVic VTC Dual
eVic VTwo Mini
eVic VTwo
eVic AIO
eVic Basic
eGrip II / Light
Cuboid
Cuboid Mini
Cuboid 200
Evic Primo v1 / v2
Evic Primo mini
Evic Primo SE
Wismec
Presa TC75W
Presa TC100W
Reuleaux RX75
Reuleaux RX200S
Reuleaux RX2/3
Reuleaux RXmini
Reuleaux RX300
Sinuous + Predator 228W
Reuleaux RX Gen3
Reuleaux RX Gen3 Dual
RX2 20700
Sinuous P80
RX2 21700
Eleaf
Invoke
Others
Vaponaute La Petite Box
acstorfer
Take My Money Dammit!
I have a Tubo Evic Dual that holds one or two batteries, and a Cuboid 200 that holds three.
If you get your TetraX you'll use it more than the P-80. It is far more comfortable, it has more options with mods, it's less clumsy on waterpipes, and no more palm burn. I sold my 2 P-80s and I don't miss them even a little.
CanikUser19
Trenchtown Rock
Discount code for anyone in need of a Tubo/AF compatible mod https://cheapvaping.deals/wismec-reuleaux-rx-gen3-230w-dual-box-mod-kit