Felicia-the-thiccest
New Member
Hey guys that scored a custom, which wood did you pick out?
Tetra P80
- Thread starter funkyjunky
- Start date
Mr_SpaceCadet
New Member
Ooh. I wish I'd been able to get a custom instead of prebuilt but the drop I got it from was only prebuilts and Tetra xs.I just received mine this morning and it looks absolutely amazing. I haven't tried it out yet but am so pleased with how it turned out.
Thanks for inspiring me on my design, mine is the cat one above. I couldn't decide on what I wanted and was almost about to go with something plain until I saw your one and decided it was worth putting a bit more effort in. Ralph really did a great job at giving me what I wanted, and more.
Stonedbadger
Well-Known Member
Hey, I went with a red P80, the canary wood, and a random inlay!
When it arrives I'll need rig up both of my P80s so that I could hit them at the same time for a massive hit! Does anyone know where you could buy a double adapter??
Cheers!
Drug
Well-Known Member
If you google double bowl adapter you should find some options.
GoldenBud
Well-Known Member
Dio
Sacraponator
My unit arrived today,
Man this thing is beautiful. Got to test it this evening right away. A few observations;
- Wow this thing is smaller than I expected.
- This is a work of art.
- I searched way too long for the fire button.
- This device vapes extremely well.
- Damn that mouthpiece fall out when the unit is upside down.
- This wood gives off the most amazing smell when the unit gets warm.
@Ratatat
Here is a picture of my Japanese oak unit.
It is more yellow and lighter in color compared to my tinymight which is (normal?) oak.
Didn't had the opportunity to shoot a picture in daylight yet.
Highly impressed.
Man this thing is beautiful. Got to test it this evening right away. A few observations;
- Wow this thing is smaller than I expected.
- This is a work of art.
- I searched way too long for the fire button.
- This device vapes extremely well.
- Damn that mouthpiece fall out when the unit is upside down.
- This wood gives off the most amazing smell when the unit gets warm.
@Ratatat
Here is a picture of my Japanese oak unit.
It is more yellow and lighter in color compared to my tinymight which is (normal?) oak.
Didn't had the opportunity to shoot a picture in daylight yet.
Highly impressed.
VirginVape10X
Well-Known Member
For those of you who ordered and received a custom P80 with special inlay (glow in the dark, etc.), how soon after placing your order did Ralph/Paddy get in touch with you to get your design input? I sent Ralph an email about my design idea immediately after confirming that my payment went through on the last drop as I was afraid that typing it out on the website would have eliminated my chances of scooping one. I haven’t heard back from Ralph so I’m crossing my fingers that he at least got my message. Tia.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Haha don't worry at all, it's going to be a long while before your unit gets made, and I think that would be one of the more final steps? In any case they will get back to you when they can, I don't think you have to be concerned, just try to patiently put it out of your mind!
Kinick23
Well-Known Member
@sanzarelli I had 3 packages delivered to NY in about week in 2019. Last package shipped just as covid hit in march and ii got almost 2 months later but that's on the extreme side
SquirrelMaster
Well-Known Member
@Stonedbadger
I bought one on DH Gate for $9 CAD shipped but the seller, Overstock_Smart is out of stock. The price has doubled as well but it's still pretty cheap.
Oregon Glass Blower carries some as well that would be much higher quality which is reflected in the cost if you don't mind. https://oregonglassblower.com/14mm-Cloud-Buddy-Y-Adapter-with-Carb-14CB.htm
I bought one on DH Gate for $9 CAD shipped but the seller, Overstock_Smart is out of stock. The price has doubled as well but it's still pretty cheap.
Oregon Glass Blower carries some as well that would be much higher quality which is reflected in the cost if you don't mind. https://oregonglassblower.com/14mm-Cloud-Buddy-Y-Adapter-with-Carb-14CB.htm
What kind of magic is going on here? I fully expected the stem to go flying and smash.
Last edited by a moderator:
Dio
Sacraponator
Hey this worked, thanks!
This morning I scrolled through the menus and compared them to the screenshots in the manual.
In the first image it shows TCR. My unit show Tubo.
Also the middle line in the image shows: COIL,
While my unit shows: W2C1. I can't change this in edit mode. What does this all mean? I'm new to this kind of stuff.
Also the Algo settings in the manuals differed slightly with my unit so I corrected that. That's OK?
This morning I scrolled through the menus and compared them to the screenshots in the manual.
In the first image it shows TCR. My unit show Tubo.
Also the middle line in the image shows: COIL,
While my unit shows: W2C1. I can't change this in edit mode. What does this all mean? I'm new to this kind of stuff.
Also the Algo settings in the manuals differed slightly with my unit so I corrected that. That's OK?
leave it at what comes factory set, the manual is a bit dated, i will update it
w2c is what warmup2cruise is set to, 0 off, 1 warmup to cruise, 2 warmup to tempest.
eco shows the eco features, see extended manual on shop.lamart.ch (top right) for more info
w2c is what warmup2cruise is set to, 0 off, 1 warmup to cruise, 2 warmup to tempest.
eco shows the eco features, see extended manual on shop.lamart.ch (top right) for more info
there is no factory default besides updating the firmware BUT then other stuff like coil resistance and tcr values get reset.
the only deviation from the manual for the PID values is I with 650 (it doesnt matter much but its a bit more aggressive with the 50 plus)
warmup2cruise and eco can be adjusted in menu>vaping, you can play with that and see what you like.
in general i recommend using the device out of the box without diving into the settings right away
have fun testing it!
the only deviation from the manual for the PID values is I with 650 (it doesnt matter much but its a bit more aggressive with the 50 plus)
warmup2cruise and eco can be adjusted in menu>vaping, you can play with that and see what you like.
in general i recommend using the device out of the box without diving into the settings right away
have fun testing it!
.
Bazinga
Well-Known Member
I like having an adjustable stem with my Tinymight. Is there a stem that I could adjust the load for use in my P80? One basket screen of weed doesn't suffice. I know that I could simply use another basket screen after the first one is exhausted. But that would be too easy and make too much sense. Damn these devices are beautiful !!
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
well you could do the full joint load, though I don't find it as effective, another thing that would allow you to load more that I don't find as effective, would be the vapexhale ELB's
GoldenBud
Well-Known Member
+1 for these ELB, you can also do double layering, herb on 15mm screen of the stem, and herb also in the basket screen..so you can do 0.3g or even more..better not going too much because you will have to stir the bottom layer if it's too much but the basket will be hot! pay attention..
Coldfusionscooter
New Member
So I just got ahold of my unit and I think I may have screwed up. I don't know the first thing about 18650 batteries but I heard the Molicell P26A was popular (with Mooch) so I ordered some. But the wattage on my P80 is all over the place, jumping from apx 4-18w I wanna say and the temperature is fluctuating as well. Does this sound like just a poor battery choice causing my issues?
GoldenBud
Well-Known Member
Do not use anything but the batteries recommended in the lamart manual. (LG HG2/ Sony VTC6 / Sony VTCsomethingelse)
FlyingLow
Team NO SLEEP!
That is like only using Kleenex tissues... those are reputable suggestions but you are not limited to those.
Your performance is not battery related, especially if it exhibits the same exact behavior with multiple batteries.
Your description is very vague, post a video. I imagine your fluctuations are normal, just the device balancing bursts of power to maintain the proper temps in the heating chamber...
I know an awful lot about batteries but I really am not a know-all on the P80. I am curious to hear other's diagnosis of your brief description.
Are you using it? How is performance?
Funky said it best, the P80 heater LOVES airflow. So seal your lips and rip deep! I use mine exclusively on Cruise mode and find a 3min timer PERFECT!
Your performance is not battery related, especially if it exhibits the same exact behavior with multiple batteries.
Your description is very vague, post a video. I imagine your fluctuations are normal, just the device balancing bursts of power to maintain the proper temps in the heating chamber...
I know an awful lot about batteries but I really am not a know-all on the P80. I am curious to hear other's diagnosis of your brief description.
Are you using it? How is performance?
Funky said it best, the P80 heater LOVES airflow. So seal your lips and rip deep! I use mine exclusively on Cruise mode and find a 3min timer PERFECT!
Coldfusionscooter
New Member
I guess I haven't seen many Tetra screens while they're actually running, it just seems abnormal to me. This is how it looks in cruise mode and it never really settles, it's always jumping around. Performance seems great, I'm getting huge tasty rips it's just a little distracting and worrying to see the data on the screen constantly fluctuating.