Tetra P80

[BubbleDrop]

For one Euro more the Evovap. Better to stay on the original name, it's just marketing.

If you search correctly, you can get the Enovap for 10.80 € (I believe that's what you're referring to).
Anyway I have both Molicels and Enovaps Molicels, they all work just fine.

 

[YuckMassF]

This is what I also understood.
For one Euro more the Evovap. Better to stay on the original name, it's just marketing.

Enovap says they are the only authorized supplier of molicel in France, only authorized vaping battery (samsungs are not allowed for vapes from 1st january 2020) because they are made for vape/e-cig mods. Maybe that is just marketing, idk, for 1 euro per battery i think im fine taking them, given with a plastic box for each battery and security garantee.

Et merci pour la réponse!

 

[Olmsted]

Not to be a horror story, but my custom from the Sept. 6th drop was sitting in a distribution center in Philadelphia, PA (only a few miles from destination) from the end of October through the end of December. Then it decided to take a trip down to Atlanta, GA for a week to celebrate the new year. Looks like it just got back to Philly today so my fingers are crossed that it's finally coming home, but I'm not holding my breath tbh.

IT FINALLY CAME!!!! Will try to post pics later, but everything seems intact - which is a relief after it was in transit for 80+ days.

 

[Shit Snacks]

Can't wait to see the results and impressions of the rubies associated with the Shit Snacks Mini J-Hook.

Super fast shipping as always from @VGOODIEZ and they even doubled my ruby order for free, so I got a whole other pouchfull not seen below, thanks again VG!!

Still experimenting, these are a little smaller in person than I was expecting, some can fall through into the color, but fortunately they don't come out the mouthpiece! Probably could use a larger size in here though, or a combination perhaps? There's definitely more room for more, but I only put in one bagfull to try... Need to spend more time with it, first bowl was a little more coarse ground than I usually use with my Tetra, so I shall report back!

Edit: yeah okay yeah much better with the medium fine grind as expected! 375-415F the area with the rubies gets super hot though so need to be careful...

This is Candyland by the way

Edit again: I also got this 18.8 mm female cooling stem with Vigreux spikes made by @Vlad the Inhaler aka 508phineas on Instagram so that is yet another cooling option! These are more effective than other spike designs, with rows of three spikes pointing downwards toward the hot vapor, being female it is useful for a variety of vapes, and the glass is super thick, very well made by Phineas as usual!

These are very reasonably priced at vgoodiez and strongly worth considering, even though they are not even a jayhook!

 

[Oden]

Super fast shipping as always from @VGOODIEZ and they even doubled my ruby order for free, so I got a whole other pouchfull not seen below, thanks again VG!!

Still experimenting, these are a little smaller in person than I was expecting, some can fall through into the color, but fortunately they don't come out the mouthpiece! Probably could use a larger size in here though, or a combination perhaps? There's definitely more room for more, but I only put in one bagfull to try... Need to spend more time with it, first bowl was a little more coarse ground than I usually use with my Tetra, so I shall report back!

Edit: yeah okay yeah much better with the medium fine grind as expected! 375-415F the area with the rubies gets super hot though so need to be careful...

This is Candyland by the way

Edit again: I also got this 18.8 mm female cooling stem with Vigreux spikes made by @Vlad the Inhaler aka 508phineas on Instagram so that is yet another cooling option! These are more effective than other spike designs, with rows of three spikes pointing downwards toward the hot vapor, being female it is useful for a variety of vapes, and the glass is super thick, very well made by Phineas as usual!

These are very reasonably priced at vgoodiez and strongly worth considering, even though they are not even a jayhook!

The rubies do not add any restriction to the draw on the J-stem? I intend to use the same process if it is concluded. Because my throat is very sensitive to high temperature.
And that sturdy glass rod makes you want to try.
You compared it to how other rod you have.
This kind of big sturdy rod is good for home use

 

[invertedisdead]

The rubies do not add any restriction to the draw on the J-stem?

I’ve been using sapphire and ruby cooling stems for almost two years - Yes they definitely add restriction, the restriction is what allows them to cool the vapors.

 

[Oden]

I’ve been using sapphire and ruby cooling stems for almost two years - Yes they definitely add restriction, the restriction is what allows them to cool the vapors.

Thanks for the explanation. It is a good option for high temperatures

 

[FlyingLow]

It is a balance... IMO restriction is bad, but the extra surface area of the pearls does provide cooling. Anyone try sticking theirs in the fridge for an extra chill?

 

[Shit Snacks]

Yeah haha keep meaning to try that too!

I'm not sure yet about the balance of draw restriction and cooling, it is different so will take some adjustment perhaps, also like the hits can still be harsh, while beads can be a little tedious to work with... too early to tell what's the most effective, but it is fun to have another unique option in the rotation!

 

[Shit Snacks]

Cannot edit, and no one else posted, but another round with another strain well- ground and I am getting the hang of it now!

 

[Redline]

Cannot edit, and no one else posted, but another round with another strain well- ground and I am getting the hang of it now!

Woah, which mouth piece is this??

 

[Shit Snacks]

Woah, which mouth piece is this??

LOL see above I've been posting about it, this is the male mini J-Hook in the lake green teal color, with 3mm rubies from vgoodiez.

 

[Redline]

LOL

 

[Ripstar]

Cannot edit, and no one else posted, but another round with another strain well- ground and I am getting the hang of it now!

Looking FIT!

 

[Oden]

have you vaped cannabis resin with your p80? if you do, how do you go about vaporizing the resin?

 

[Shit Snacks]

have you vaped cannabis resin with your p80? if you do, how do you go about vaporizing the resin?

When you say resin, do you mean concentrates like rosin and wax? Or are you talking about like smoked pipe resin or vapor reclaim from like the glass stems...?

 

[BubbleDrop]

I could be wrong, but I think he's talking about hash.

 

[Weedaholic]

Cannot edit, and no one else posted, but another round with another strain well- ground and I am getting the hang of it now!

You sure like your purple @Shit Snacks
I like that j hook with the ruby balls....sweet

 

[Bifty]

have you vaped cannabis resin with your p80? if you do, how do you go about vaporizing the resin?

My tetra is on the way but if its like other convection vapes I have used, your best bet will be to sandwich the hash in some herb. If you only have hash, grab some organic cotton from your local vape shop and sandwich with that instead. Go very easy on the temps if using cotton.

 

[BarneyRose]

I'm elated that I somehow managed to snag a pre-built unit!

I'm so looking forward to giving my trusty Tubo a much needed vacation after 3+ years of daily use. Not sure if it's widely known in this thread, but I recently consolidated my stem collection after discovering KGWoodcraft's Crossover Adapter, which allows me to use any of my Dynavap stems with the Tubo as well as my soon to arrive P80. My wife is also very pleased that using S&B dosing capsules has eliminated all the green crumbs my basket screens would leave behind (but KG also makes a basket screen adapter if that's more your vibe). This little chunk of wood changed the game for me making my Tubo more portable than ever. I sold off all of my traditional glass stems and couldn't be happier.

https://imgur.com/BLHkDEn

Hope this helps improve my fellow Lamart fanatics' experience as much as it has mine!

 

[Shit Snacks]

You sure like your purple @Shit Snacks
I like that j hook with the ruby balls....sweet

This was actually the first thing I got in purple, well it is violet red, a little more fuchsia, then I got light amethyst BCG, plum jelly bandit, O'Connell inception stem for FW7... Oh actually when I got my padauk tubo tetra dual custom, I got a custom spiked stem with a purple-ish horn, that was the first first!

I have a lot of blue actually, which is what my original tubo evic is, marine blue painted poplar, plus my first BCG is aquamarine and went with blue for my IQ2 so that was a really tough decision between it and their purple! And my soon to come new bandit will be a blue too lol

I also think I really need a blue stabilized flame box elder burl Tetra so then what color do I get for an acrylic tetra, purple or blue or yeah red like the rubies is a nice color too as is orange and greys... I need @funkyjunky to make and release a TetraG3D using RXgen3Dual mod so I can get more of his stuff for my collection!!

My tetra is on the way but if its like other convection vapes I have used, your best bet will be to sandwich the hash in some herb. If you only have hash, grab some organic cotton from your local vape shop and sandwich with that instead. Go very easy on the temps if using cotton.

Ah if hash @Oden then yeah I would say just sprinkle it on top, I don't know why sandwiching specifically would help, with pure convection the heat and air flow is coming from the top of the herb basket, so the air will be the hottest at the edge of it, that's why sometimes you get a hotspot when you finish a bowl at a high temp but the herbs below it are not as dark... Anyway I feel like hash would need high temps, better to use without herb, maybe some ceramic underneath like the flavor saver from 7th floor elev8r glass?

 

[Bifty]

I don't know why sandwiching specifically would help

I find that soft hash has a tendency to stick to the glass and screens and necessitate excessive cleaning, so I try to avoid it touching any of the surfaces. It can clog a screen with one bowl in my experience haha. On top of the herb would work fine with the wpa though I guess.

 

[Oden]

Je peux me tromper, mais je pense qu'il parle de hasch.

Je suis ravi d'avoir réussi à attraper une unité pré-construite!

J'ai hâte de donner à mon fidèle Tubo des vacances bien méritées après plus de 3 ans d'utilisation quotidienne. Je ne sais pas si c'est grand connu dans ce fil, mais j'ai récemment consolidé ma collection de tiges après avoir découvert l' adaptateur Crossover de KGWoodcraft , qui me permet d'utiliser l'un de mes tiges Dynavap avec le Tubo ainsi que mon prochain P80. Ma femme est également très heureuse que l'utilisation des capsules doseuses S&B ait éliminé toutes les miettes vertes que les écrans de mon panier laisseraient (mais KG fabrique également un adaptateur pour écran de panier si c'est plus votre ambiance). Ce petit morceau de bois a changé la donne pour moi, rend mon Tubo plus portable que jamais.J'ai vendu toutes mes tiges de verre traditionnelles et je ne pourrais pas être plus heureuse.

[MEDIA = imgur] BLHkDEn [/ MEDIA]

J'espère que cela aidera à améliorer l'expérience de mes camarades fanatiques de Lamart autant que la mienne!

I do not understand how you adapt this wood adapter to the lamart rod?

How do you go about it and which rod works with this wooden adapter?

 

[staircase slight of hand]

That adaptor is for using dynavap stems with the Tubo/Tetra/P80, like they mentioned:

KGWoodcraft's Crossover Adapter, which allows me to use any of my Dynavap stems with the Tubo as well as my soon to arrive P80.

 

[Shit Snacks]

I find that soft hash has a tendency to stick to the glass and screens and necessitate excessive cleaning, so I try to avoid it touching any of the surfaces. It can clog a screen with one bowl in my experience haha. On top of the herb would work fine with the wpa though I guess.

Ah yeah I mean I use my Tetra mostly upside down even with the bent stems, and I would especially want to keep things upside down if using with concentrates so nothing can melt and drip on the heater or screen...

I do not understand how you adapt this wood adapter to the lamart rod?

How do you go about it and which rod works with this wooden adapter?

Yeah the wooden part fits into the tetra, using the 18.8 mm connection, and then dynavap stems can attach to the other end, so it does not use any of the lamart stems