Supreme V3 gongs
- Thread starter PeteSeattle
- Start date
-
- Tags
- glass gong supreme supreme v3
stickstones
Vapor concierge
I don't know how this design will end up, but count me in when we get there!
Buildozer
Baked & Fried
That's interesting, I hadn't seen that yet
PeteSeattle
Well-Known Member
What's the correct phrase? You break some eggs before you make an omelette.
Yeah, I had to break a few a start again. Didn't like the way some mated with the male joint. Good news I made replacement ones and a few more. I've got a bin with some with dimples waiting to be put in ... photos later ...
@Hogni ... I've been sketching ideas. If any of you all have ideas about this please make suggestions. I feel if we're to make something new let's make it a group effort. I love sharing ideas.
Yeah, I had to break a few a start again. Didn't like the way some mated with the male joint. Good news I made replacement ones and a few more. I've got a bin with some with dimples waiting to be put in ... photos later ...
@Hogni ... I've been sketching ideas. If any of you all have ideas about this please make suggestions. I feel if we're to make something new let's make it a group effort. I love sharing ideas.
PeteSeattle
Well-Known Member
Gray Area
Well-Known Member
Leave at least one (for me) without dimples would you?
... and I believe we were promised photos
Keep up the good work, you know we appreciate it...
PeteSeattle
Well-Known Member
Hi all,
Here's some of the stems from an overnight soak in the kiln.
The brass tool is the magic that makes a 14mm joint. Anyway, back to the bench!
Here's some of the stems from an overnight soak in the kiln.
The brass tool is the magic that makes a 14mm joint. Anyway, back to the bench!
subway13029
Well-Known Member
the brass tool looks almost like the titanium adapter!! ill have to post pics this evening.
Sauté some mushrooms in herb butter, grease the pan with some herb butter, powder a good amount ABV - add that to some Chili. Start the omelette, mushrooms on the inside (after sautéing), fold eggs over the mushrooms, ABV chili over the top, a decent cheddar cheese finely grated on the top and a small pinch of spring onions.
An omelette that will relieve what ails ya!
Oh wait! This isn't the food porn thread, is it? My Bad!
An now I'm hungry to boot!!!!
May I take your order sir?Talk to DDave!
DDave in the house!Well, let's get @DDave in here
(Taking this opportunity to mention that just prior to this post I had an amazing session of Sajay (a new sativa). Energizing is an understatement and a solid flavor I've not had in a long time! Probably why I went wild with the food description!
)Help me out here! What is being sought?
PeteSeattle
Well-Known Member
Hi @DDave
We're discussing modding a glass stem for the Supreme V3 and it was suggested we should go this route
We started off with just the simple gong but ideas are popping up based off your design. We didn't want to copy it so we'd really appreciate input and or involvement.
Off to make an omelette.
Have a great weekend all.
We're discussing modding a glass stem for the Supreme V3 and it was suggested we should go this route
We started off with just the simple gong but ideas are popping up based off your design. We didn't want to copy it so we'd really appreciate input and or involvement.
Off to make an omelette.
Have a great weekend all.
biohacker
H.R.E.A.M
Us Supreme fanatics are seeking a concentrate chamber for it! Pete is being innovative and creating us a glass gong since none exists at the moment, but ground is being broken!
The Supreme works pretty great for whole nug micros too!
justvapin
Enthusiastic Cannabis Consumer
So I ordered the @DDave concentration unit earlier this week. I received it today.
I was surprised to find the 14mm stem portion of this mod slides right into the Supreme. If it had a dimple right where it gets slim to at as a screen, it would work as it is. Of course need to rid it of the glass screen at the end of the joint to help airflow, but just saying this piece is already close to exactly what we need. I have several other @DDave 14mm stems, and all of them were just a touch too large to slide into the Supreme.
I also used just the bucket with the Supreme. Just drop in a bit of weed, heat up the Supreme and it fits right onto the bucket for a total convection hit. Very nice.
Edit: So this led me to digging thru all my other @DDave stems, and I found an 18mm short stem from him that actually slides into the tube of the Supreme! It only goes in 1/2 inch, but it's enough....I was able to jam a screen up in the stem from the joint side, and created a bowl that was fairly small, but I did it! I was able to use some ground weed and just did 2 great hits!! If this stem was 1 inch longer, it would be PERFECTION! I have a working 18mm stem fellas! It's not perfect it needs to be a bit longer (one damn inch) and needs a screen method or pinch, but this thing is working just fine! 18mm should be doable!!!
I could also just put an elb into the joint end to act as a screen, and load up the other end of the entire stem with a bunch of ground and have a party bowl (the stem gets wider as it nears the joint and would hold a bunch)!
I was surprised to find the 14mm stem portion of this mod slides right into the Supreme. If it had a dimple right where it gets slim to at as a screen, it would work as it is. Of course need to rid it of the glass screen at the end of the joint to help airflow, but just saying this piece is already close to exactly what we need. I have several other @DDave 14mm stems, and all of them were just a touch too large to slide into the Supreme.
I also used just the bucket with the Supreme. Just drop in a bit of weed, heat up the Supreme and it fits right onto the bucket for a total convection hit. Very nice.
Edit: So this led me to digging thru all my other @DDave stems, and I found an 18mm short stem from him that actually slides into the tube of the Supreme! It only goes in 1/2 inch, but it's enough....I was able to jam a screen up in the stem from the joint side, and created a bowl that was fairly small, but I did it! I was able to use some ground weed and just did 2 great hits!! If this stem was 1 inch longer, it would be PERFECTION! I have a working 18mm stem fellas! It's not perfect it needs to be a bit longer (one damn inch) and needs a screen method or pinch, but this thing is working just fine! 18mm should be doable!!!
I could also just put an elb into the joint end to act as a screen, and load up the other end of the entire stem with a bunch of ground and have a party bowl (the stem gets wider as it nears the joint and would hold a bunch)!
Last edited:
PeteSeattle
Well-Known Member
Well that makes total sense. Why reinvent the wheel?
Anyone else have this mod also from @DDave and confirm the fit? Could there be a collaboration to make custom gong stem convection mod? Anything is possible. Let's put our resources together.
@justvapin would you mind posting images of the fit? Also when you wrote about the dimple being at the slim part of the stem or the 14mm taper? My concern with dimples in the taper would be the final fit.
Anyone else have this mod also from @DDave and confirm the fit? Could there be a collaboration to make custom gong stem convection mod? Anything is possible. Let's put our resources together.
@justvapin would you mind posting images of the fit? Also when you wrote about the dimple being at the slim part of the stem or the 14mm taper? My concern with dimples in the taper would be the final fit.
Last edited:
Gents, thought on this last night and came up with pretty much the same thoughts as you have. (After watching only a few Supreme V3 vids on youtube).
Regarding the mentioned dimple, can anyone draw a pic and post or send to me directly? ddavemod@gmail.com
I opened!!! 
justvapin
Enthusiastic Cannabis Consumer
You can see how the pinch is used on these (not very well but several examples), acts as a screen and you generally use coarse or unground material......
https://vapolution.com/index.php?app=ecom&ns=prodshow&ref=VAP2-STRAIGHT-BOWL
https://vapolution.com/index.php?app=ecom&ns=prodshow&ref=VAP2-STRAIGHT-BOWL
PeteSeattle
Well-Known Member
This is a drawing we came up earlier
And here are physical pieces with a mocked up hand made 14mm
Hope that helps.
justvapin
Enthusiastic Cannabis Consumer
If I could get the glass screen off the end of the stem of the concentration unit, I could get a screen in there easily and have a PERFECT 14mm bowl for the Supreme. I'm wondering if I can cut the glass screen off.
What's the worst that could happen, I break it? Although I'd still prefer a pinch for a screen, I don't mind using a SS screen in there......
What's the worst that could happen, I break it? Although I'd still prefer a pinch for a screen, I don't mind using a SS screen in there......
subway13029
Well-Known Member
Ok if there are no dimples or we wanna use ground bud then what option? Just a screen like already uses? Like a removeable one or just a fixed screen?