Puffco Peak
- Thread starter duff
- Start date
bmore
Member
Personally I don't think $375 is a bad price for the Peak. If you put together a complete dab set up with everything you need the cost is not a huge increase.
I know the glass I was using for my old rig was a $180 recycler. Then add on the other things you need and it gets up there quick.
I know the glass I was using for my old rig was a $180 recycler. Then add on the other things you need and it gets up there quick.
nosmoking
Just so Dab HAppy!
I do not have one, however there is not much too it. The glass can be removed and cleaned just like any rig, whatever your preferred method is. The atomizer can be removed and disassembled. The atomizer consist of 4 pieces- the metal base, the ceramic plate, the ceramic cup and the rataining ring for the cup. The cup can be completely removed and soaked or torched even. I am not sure about the metal base or the retaining ring for the atomizer, however I would think these items could be rinsed/soaked in ISO.
Seentheir video on IG a few days ago with the big cap, looks dope with the smaller cap!
Vitolo
Vaporist
The design is nice, aesthetically.
I do not enjoy using water filtration, but am interested in this tool ( One is on it's way here)
I use water when a device demands it and will not function without it.
Out of curiosity... as my unit arrives in a short time....
It obviously won't be a decision making piece of feedback, as it is coming.
This is a preparatory question to learn if any of you fans of this tool have attempted using tool dry.
I do not enjoy using water filtration, but am interested in this tool ( One is on it's way here)
I use water when a device demands it and will not function without it.
Out of curiosity... as my unit arrives in a short time....
??
It obviously won't be a decision making piece of feedback, as it is coming.
This is a preparatory question to learn if any of you fans of this tool have attempted using tool dry.
stonedhammer
New Member
I did once accidentally. It wasn’t too bad honestly. I coughed a bit but nothin crazy.
Piffdexter
Well-Known Member
Hey new here and i got my peak on monday. Other than having to make sure the glass is lined up with the airpath i have no problems. I have tried budder, diamonds and sauce and the peak handled it all well. I have let 4 people try it so far. 2 never dabbed before. They all loved it. This is a great investment.
Vitolo
Vaporist
Good to know.
I can take dense hits without issue, but have many reasons I do not like using water.
The main reason I do not like water filtration, is that there is a sizable wad of material that remains behind in the water after a dab using a bubbler.
It is my contention that that matter belongs in my body.
The residues that after a few dozen uses... that remain in the lining of a dry piece of glass can be easily reclaimed with minimal Iso.
Is the device geared to the water being a restrictive tool to make hits go easier ... impedance matching if you will...(accomplished also through breath control skills) or is it simply a convenience for those needing a filtered hit?
bmore
Member
Thanks for the feedback, I’m considering those inserts.
Can't you just turn the temp down on the Peak?
Glass Pound
Well-Known Member
What about the hyer Big E.
So I'm trying to decided to own a peak or a hyer Big E. I have use them both and like the big E performance over the peak. Also like to be able to carry extra batteries and replace them all together when they wear out. The peak is more portable especially with its case and heats up faster. Any one on here own both and could give some feed back?
Last edited by a moderator:
tylerj55
Well-Known Member
I use it on the lowest temp and it still kills me!
I don’t own both, but I saw they have some new bangers coming out for it. They have a core reactor coming which is pretty cool.
Hoosier
Well-Known Member
I get the feeling that you have tried a few...at this pint, what is the best aftermarket quartz cup that can be purchased? I have a peak coming in this week and would really prefer quartz
tylerj55
Well-Known Member
If you have the ability to sand a few of the hunibadger cups down to size I would do that. They don’t fit in there perfectly, but they are cheaper then the eternal ones by a long shot and a decent bit thicker. It heats up more even and stays hot longer. If you can’t do that than I would recommend waiting for cca710’s inserts. In the mean time I recommend getting a 10mm quartz nail atomizer from source and loading concentrates in that and then dropping it in. I have not tried the 13mm ones from source but they may fit too.
Hoosier
Well-Known Member
Cool. I have the source nail quartz still from the original release a couple of years back.
Are you talking about the hunibadger 1ml jars? How did you sand down, dremil?
tylerj55
Well-Known Member
Yeah that’ll work fine, that’s exactly what I use.
I used a belt sander and water(to cool the quartz down) to make them fit, and yeah the 1g ones here: http://www.hunibadger.com/SHOP/HuniPot
tylerj55
Well-Known Member
That little holder is actually a part of the hunibadger. I do have it still though.
darkrom
Great Scott!
I've heard of SIX failures in the group of people I sesh with from these things 
Consider my interest very much on hold until they work out the bugs. I know thats anecdotal, but it seems like they start out working well and are failing rapidly for the locals who have had them die. I asked around because this is what I've been looking for, but not if it is this unreliable.
Consider my interest very much on hold until they work out the bugs. I know thats anecdotal, but it seems like they start out working well and are failing rapidly for the locals who have had them die. I asked around because this is what I've been looking for, but not if it is this unreliable.
aj0125
Well-Known Member
I've heard of SIX failures in the group of people I sesh with from these things
What is it that is going wrong with the units? Is it the same problem for all six? My buddy has one coming in a few days, I really hope he didn’t just waste his money.
toros23
Well-Known Member
Seems to always be atomizer issues in my circle of friends that have a Peak. Took me two weeks to get a replacement in the mail, others still waiting for support to get around to responding. I like the peak for what it is (big ass vape pen with torchable bucket and water filtration) but it will never replace my glass and quartz.
aj0125
Well-Known Member
This is what I have wondered and feared all along. Many people online (and the marketing) are saying that I can drop my home rig. I think those people don’t dab nearly as much as they think they do compared to heavyweights...