vapviking
Old & In the Way
This is not always a necessary caution with grinders BUT, with this one, be careful around those seriously sharp cutters!
OLD MATE (formerly Medgrind)
- Thread starter Timps27
- Start date
Thanks for that. Checked out the Reload. Looks like its part of the DynaVap Universe? The Mad Heaters website has products I haven't seen before so might check them out. I had Dynavap but haven't really used it.
El Duderino
The Dude abides.
In that case you might have a look at these threads:
The Tempest by Mad Heaters & Phatpiggie
Take my money. This looks absolutely awesome. Mad heaters and Phatpiggie Thermal Accumulator 2. It has a clicker and a heat sensor thing. Totally in love already.
fuckcombustion.com
Induction Heater - MAD Heaters - Innovative Dynavap Accessories
Hello Everyone! I’d like to introduce MAD Heaters with our first product, the Sense. Our goal is to deliver high quality induction heaters and accessories for the Dynaverse and take these products to the next level. I’m going to start off with a huge thanks to everyone in the beta group for...
fuckcombustion.com
Great stuff!
666Honeybadger
Unknown member
It's really well adapted to work with the Dynavaps (with the magnet on top and the debowling tool) but it's more part of the MADheaters universe imo. The first stems from MAD were made to work with the DV tips but since that they have moved on to The Tempest which is a complete device that differs quite a lot from the Dynavap style.
The Tempest is more like a portable ball vape and has a very different usage style. (the tip works totally different and has a very good heat retention so no reheating is needed for instance).
The Reload however works great with any vape imho. I carry it with me all the time. You can stack as little or as many containers as you like so it's perfect for storing/transporting multiple strains in one compact vessel!
It also does what it says: it reloads all my vapes anywhere, anytime!
I don't keep my ABV so i use all three containers for storage.
Same here. I still have them but never use them anymore.
But again: the reload is just a universal storage solution and is in no way limited to dynavap usage.
oldfool
Well-Known Member
For real! I got too happy spinning it once and spun the top right off. Pure reaction had me reach and miraculously grab it mid air with the teeth pointing out
I am much more restrained in my fidgety joy now
oldfool
Well-Known Member
Glad I got an early one with full magnets and full post engagement.
I can hold it by the top and spin the bottom for all I got and it's not dropping.
Both of mine are titanium and I think the lighter weight is what allowed me to launch it with an attempted really fast spin. That was with the magnet!
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Nope! They get fully cleaned before they ship
olivianewtonjohn
Well-Known Member
This cant be understated. The bearing is very useful, smooth grind, no metal on metal contact. But also, as it gets through the initial grind, I can spin it quickly and let it do its thing. This helps get all the tiny bits to the bottom. Great feature.
Its not a problem even if I use a PEEK bearing. The top is very heavy, not possible to spin it off unless you're a super hero.
@SteveOG
JyARz Storage Containers
Just found these neat things... Nondescript plastic jar lined with glass "JyARz feature two air-tight seals, one on the glass insert and another seal on the outer shell." Dunno if I'd plop the $13 for one though jyarz.com What I would think it'd be great for is for filling with pre-ground...
fuckcombustion.com
My container of choice. Although I mostly use the classics to store my unground to keep it fresh. You could use one for ground as well. They even sell a funnel.
EDIT:
Here is my first post in that thread, posted in 2013 (and yes its still working well)
JyARz Storage Containers
Just found these neat things... Nondescript plastic jar lined with glass "JyARz feature two air-tight seals, one on the glass insert and another seal on the outer shell." Dunno if I'd plop the $13 for one though jyarz.com What I would think it'd be great for is for filling with pre-ground...
fuckcombustion.com
Last edited:
True, I used some string like a starter rope to get my full ceramic (settled on a PEEK) to spin for over 5 minutes once...just for fun.
moonbaker
New Member
My PEEK bearing was loose in the sleeve and gradually eased out and allowed metal to metal. However, all is not lost, now I install the PEEK for cleaning.
VapingYogi
Pranayama; of a sort.
I cleaned my Aroma 3 for the first time and swapped my ceramic bearing for the main one, I love the extra spin the ceramic give it, it spins for 5 or more minutes, but for using it as a grinder, can't beat the normal black one that I have forgotten the name of, its just so soft and smooth and really takes the friction out of the equation.
agree, one of the best accessories available next to the Aroma 3
Cacahuates
Well-Known Member
Just ordered! Can't wait. Anyone know the eta for Toronto?
I hope you’re right. Mine came a day early, so I loaded it, as soon as it was snapped together.
WOW!
7 days from ordering to Atlanta!
Cacahuates
Well-Known Member
Wow! That's amazing. Thanks for the reply! I was debating between this and the ss bcg. Wanted to try something new. This looks so good. Thanks to all who tested and contributed to this.
Slickwilly
Well-Known Member
Hello,
Your order will be shipped this weekend. Sorry, i have had a delay on my recent bulk purchse of bearings. I chucked a banner on my website to say there could be up to 12 day delay on orders going out but i understand customers don't monitor the website.
The bearings arrived yesterday and i will be working all weekend to clear the backlog.
I apologise for the delay!
Ben
Cacahuates
Well-Known Member
AndyO
Well-Known Member
I gave my Aroma-3 a real deep, thorough clean yesterday.
It's so easy to neglect cleaning it cos it still works like a dream. But jesus man... you should give yours a real good clean this weekend, when it's back to "as new" condition it's unbelievable. I'd been considering a BCG just cos I'm a grinder fiend; I've been playing with the FlowerMate 2.5 to see whether it's going to give off metal dust.
But the super clean OMD reminds you that you'll never really need another grinder again.
It's so easy to neglect cleaning it cos it still works like a dream. But jesus man... you should give yours a real good clean this weekend, when it's back to "as new" condition it's unbelievable. I'd been considering a BCG just cos I'm a grinder fiend; I've been playing with the FlowerMate 2.5 to see whether it's going to give off metal dust.
But the super clean OMD reminds you that you'll never really need another grinder again.