You could make one out of a 19mm downstem if you have a way to cut glass but probably not worth the trouble. This thing hits hard anyway so you may not need the extra bore
Old Head Freight Train
- Thread starter emily
- Start date
coolbreeze
Well-Known Member
If you had the right size silicone tube that would work too: cut off a chunk and use it as a spacer.You could make one out of a 19mm downstem if you have a way to cut glass but probably not worth the trouble. This thing hits hard anyway so you may not need the extra bore
coolbreeze
Well-Known Member
Nice.it just sits on top lol,money saving tip
ChooChooCharlie
Well-Known Member
But, ... spending money keeps everything going
OldHead site has them in stock
oldheadtc.com
OldHead site has them in stock
Old Head 18mm Glass Extraction Chamber
This is the 18mm version of the glass extraction chamber that ships with the Freight Train starter kits. For 18mm labware.
gmo67
Well-Known Member
theyve actually been in stock but the problem lies in the delivery costs Standard Shipping $999.00But, ... spending money keeps everything going
OldHead site has them in stock
Old Head 18mm Glass Extraction Chamber
This is the 18mm version of the glass extraction chamber that ships with the Freight Train starter kits. For 18mm labware.
Total
USD
$1,032.99
ImprisonedFetus
Active Member
Holy crap! Are you on the moon?
Special Delivery by Freight Train
Cereal4dinner
Well-Known Member
Non-Diffusing Ash Catcher Adapter - Engraved Sandblasted Logo
These ash catchers are amazing for the freight train. You can get any size to accommodate any bowl or joint.
I have 2, a 14 to 14 mm male to female for the regular FT bowl, and a 14 male to 18 female for bigger 18 mm bowls that can be used with my 14 mm water pieces
There are a lot of "drop-downs" that don't actually drop down but they are nice with injectors either way! I think Cloud Connoiseur's carbed drop down would be the business. By carefully playing with the carb you can get some more out of the residual heat in the injector.
Cereal4dinner
Well-Known Member
Old head's shipping is ridiculous for Canadians unfortunately. Ive always had trouble getting things shipping from start up companies, always like min of $40 for the smallest packages even
TheDankness
Extremely Moist
I am happy to be onboard the Freight Train... wagon. Mine arrived on Monday of this week (shout-out to Vape North for being awesome!), and I had to wait until last night to try it out. I got the pro for the improved airflow and the included shield and stand. Having that coil exposed out to the world while it's cooking would just make me uncomfortable.
After burn-off I had a solid session with the Freight Train. I am pleased to report that this thing slaps. Going through a mega cube with whip attachment I was getting huge clouds between 625 and 650 on the dial. Just a small scoop of herb, medium grind, to cover the bottom of the chamber and I was in flavor country.
This morning I feel great.
I noticed over on the vaporents sub-reddit a bunch of people posting pics of their new FTs. There must have been a big shipment go out this week. Based on the hype I wouldn't be surprised if they sell out, though I have no idea what their supply chain looks like.
Anyway, great device. True end game. I am so happy with mine. Glad I had this forum (this thread in particular) available while I was deciding on whether to make the purchase or not. Many thanks to Brian of Old Head for some brilliant stoner engineering.
Happy rails.
After burn-off I had a solid session with the Freight Train. I am pleased to report that this thing slaps. Going through a mega cube with whip attachment I was getting huge clouds between 625 and 650 on the dial. Just a small scoop of herb, medium grind, to cover the bottom of the chamber and I was in flavor country.
This morning I feel great.
I noticed over on the vaporents sub-reddit a bunch of people posting pics of their new FTs. There must have been a big shipment go out this week. Based on the hype I wouldn't be surprised if they sell out, though I have no idea what their supply chain looks like.
Anyway, great device. True end game. I am so happy with mine. Glad I had this forum (this thread in particular) available while I was deciding on whether to make the purchase or not. Many thanks to Brian of Old Head for some brilliant stoner engineering.
Happy rails.
greenganja
Well-Known Member
Old Head Trading website has the loading spoon back in stock.
Principal Guy
Well-Known Member
A MUST BUY! You won’t regret it. I bought a second one later.
TheDankness
Extremely Moist
me, 10 years ago, "I dunno, this is a nice lil glass pipe, but $22 feels a bit steep"
me, present day, surrounded by medical glass, a ball injector vape and several battery powered portables, "yes, this spoon is exquisitely crafted from purest stainless steel and I will happily pay $30 in shipping for this item". *adds to cart*
greenganja
Well-Known Member
Cereal4dinner
Well-Known Member
Is that the stock bowl? Doesn't fit all the way inside the joint?
greenganja
Well-Known Member
No this isn't the stock bowl. But I do have the stock FT bowl though. This is the VGoodiez bowl. Yes It does fit all the way in the joint. With stock bowl and with Vgoodiez bowl.
ChooChooCharlie
Well-Known Member
Watched how Brian cleaned his Dab-Ready quartz buckets in video, and started searching
Found BCLabs420, got their Iso cleaning tray. Has a glass rectangular dish with locking top like a tupperware. 3D printed insert suspends off bottom, allows easy lift and drain, then reseal top for next time
Brian was using a custom dab bucket banger cleaning tool called DabMop rather than q-tips. Looked at their site, but then searched Amazon and found cheap sponge brush things with wooden handles. They squeeze and fit into both ends of injector bowl, easy twist to clean. Search for Round Sponge Foam Brush
Found BCLabs420, got their Iso cleaning tray. Has a glass rectangular dish with locking top like a tupperware. 3D printed insert suspends off bottom, allows easy lift and drain, then reseal top for next time
Brian was using a custom dab bucket banger cleaning tool called DabMop rather than q-tips. Looked at their site, but then searched Amazon and found cheap sponge brush things with wooden handles. They squeeze and fit into both ends of injector bowl, easy twist to clean. Search for Round Sponge Foam Brush
Principal Guy
Well-Known Member
Ordered! Thanks, friend. Love your commentary.Watched how Brian cleaned his Dab-Ready quartz buckets in video, and started searching
Found BCLabs420, got their Iso cleaning tray. Has a glass rectangular dish with locking top like a tupperware. 3D printed insert suspends off bottom, allows easy lift and drain, then reseal top for next time
Brian was using a custom dab bucket banger cleaning tool called DabMop rather than q-tips. Looked at their site, but then searched Amazon and found cheap sponge brush things with wooden handles. They squeeze and fit into both ends of injector bowl, easy twist to clean. Search for Round Sponge Foam Brush
ChooChooCharlie
Well-Known Member
For lazy folk who don't like wasting iso and water, and don't like torching screens clean
GratefulDread
Well-Known Member
I found some of these sponge brushes at my local dollar store after seeing your post. They're great!Watched how Brian cleaned his Dab-Ready quartz buckets in video, and started searching
Found BCLabs420, got their Iso cleaning tray. Has a glass rectangular dish with locking top like a tupperware. 3D printed insert suspends off bottom, allows easy lift and drain, then reseal top for next time
Brian was using a custom dab bucket banger cleaning tool called DabMop rather than q-tips. Looked at their site, but then searched Amazon and found cheap sponge brush things with wooden handles. They squeeze and fit into both ends of injector bowl, easy twist to clean. Search for Round Sponge Foam Brush
Grow Goddess
Just vaping
Jumping on the Freight Train! I have been dabbing for the past 6 months or so. Just stopped smoking all together. I need to use my bongs for something. Recently learned of these ball vapes, they look awesome, and I have had a hard time making up my mind. B2, TKO, or the Freight Train Pro. After all of my research I have decided to go with the Freight Train Pro. Hoping I have made a good decision. Thank you all for the reviews and comments, can't wait to try it. Also hoping I like it as much as dabbing.
Hello !
So I just ordered a Freight Train Pro and I can't wait to receive it.
I have two questions :
1. Could I do a double-decker with the freight train (dropping some wax/rosin/live resin/etc on the air intake)? How bad would the cleanup be?
2. Any other tricks, tips and hacks for my first bal vape?
2.1 Is there some pinouts charts for the PID, since it seems its different depending on the seller. I'm already thinking about buying a Quaroma XL, so i'd like to reuse the PID Controller.
So I just ordered a Freight Train Pro and I can't wait to receive it.
I have two questions :
1. Could I do a double-decker with the freight train (dropping some wax/rosin/live resin/etc on the air intake)? How bad would the cleanup be?
2. Any other tricks, tips and hacks for my first bal vape?
2.1 Is there some pinouts charts for the PID, since it seems its different depending on the seller. I'm already thinking about buying a Quaroma XL, so i'd like to reuse the PID Controller.