Nectar Hex

[seedy53]

Glad to have you on board the tiny train we’ve got going here. It’s a great device and deserves appreciation for its whole package it’s got going on.

well my straight mouthpiece just showed-up 3 months after ordering it from WISH.Com. it got lost in La.,Cali port mail/ then flagged by US customs, they opened it and re-sealed it with their us custom sticker.
then resent my little 6x4in envelope to a different carrier to me and it arrived today, after i received a full refund from WISH.com, 4 weeks ago.
so i got my $8.69 mouthpiece for free after waiting 90+days .
i never thought i'd see it, sometimes things work out.

btw after adding the silicone o-rings, i bought a few months back, i reversed the metal cooler mp section to the 510 side- then replace the stock o-ring with the new different sized o-rings, the mouthpiece fits perfect on the nectar hex and it cools the vapor and vape rig like a champ.
so thanks dude for the suggestions and help.
sorry to see you deleted your redditt account and are not active here on FC.
thanks again.

 

[seedy53]

Finally i can try this device.
it is charging, but i can say it feels top notch built

well my friend do you like the hex? replace that shit mouthpiece or add 7-3mm rubies and 2-2m rubies in that zirconium cup under the top section's screen. remove the screen and keep the rubber section. the mouthpiece replacements with several different 510's work so much better.

 

[kokolokokolokon]

well my friend do you like the hex? replace that shit mouthpiece or add 7-3mm rubies and 2-2m rubies in that zirconium cup under the top section's screen. remove the screen and keep the rubber section. the mouthpiece replacements with several different 510's work so much better.

Actually I like the mouthpiece the only problem i see is it is hard to remove. But the combo makes a good work (at least for me…maybe I have a rocky throat ).

The devices gets hot (the mouthpiece), it is heavy and maybe it has more conduction than convection, but it is easy to draw, works well with traditional hash with the concentrate capsule, you dont need to wait like pure conduction devices and have better flavor than conduction devices (maybe the flavor is similar to the legacy pro, but i don’t remember the exact flavor of the ALP).

Another con is they don’t sell it on europe.

 

[seedy53]

Actually I like the mouthpiece the only problem i see is it is hard to remove. But the combo makes a good work (at least for me…maybe I have a rocky throat ).

The devices gets hot (the mouthpiece), it is heavy and maybe it has more conduction than convection, but it is easy to draw, works well with traditional hash with the concentrate capsule, you dont need to wait like pure conduction devices and have better flavor than conduction devices (maybe the flavor is similar to the legacy pro, but i don’t remember the exact flavor of the ALP).

Another con is they don’t sell it on europe.

it's sold in uk, but not eu the hex? it's a uk company behind them medical promoted.
i love my hex after the mp change, really worth the effort

 

[kokolokokolokon]

it's sold in uk, but not eu the hex? it's a uk company behind them medical promoted.

You have to buy it from the official store. It means taxes, which can be a pain

i love my hex after the mp change, really worth the effort

I have to try it. Im afraid about the ceramic mouthpiece. Looks like it can break easily

 

[seedy53]

You have to buy it from the official store. It means taxes, which can be a pain


I have to try it. Im afraid about the ceramic mouthpiece. Looks like it can break easily

$19 to replace that MP

 

[kokolokokolokon]

$19 to replace that MP

+taxes + customs services.

Is there any video removing it?

 

[seedy53]

look back pages to the Vapinski .
back here at fc nectar hex post. i ordered that he suggested and o-rings from amazon.
from his photos and descriptions and managed to do the change. mine is the same as his.

https://imgur.com/Y80egcM

 

[seedy53]

Excuse my hack spamming, but this is perhaps the last one for now and is a pretty solid one.

Rubies can go in the zirconia cooling unit to provide additional cooling/absorption. I have managed to squeeze in seven 3mm rubies and two 2mm rubies without compromising the airflow.

Just take the silicone/screen part off and reveal the sort of hole shape of the cooling unit and stuff the rubies in there and put the silicone back on. I have found that doing this not only continuously improves the mouthpiece hack, but actually made a huge difference when using the stock mouthpiece as well.

https://imgur.com/a/RXWmp9P

this works great too.

 

[4u0o]

I just picked up a Hex because of the claim that there weren't any plastic parts in the air path.

I love the build quality, but after doing dozens of initial burn-offs, I'm getting a strong plasticizer-like odor when I pull air with the unit on. I figured it could be the silicone gasket in the cooling unit, but even when I remove it, I'm still getting the odor/taste from the main unit.

I'm also getting a loud buzzing from the heating chamber (I can hear it with the cap on). I know a lot of these portables use PWM to heat the chambers, but this was the loudest I've come across.

I was just wondering if anyone else experienced these things, or if this is a bad unit.

 

[seedy53]

I just picked up a Hex because of the claim that there weren't any plastic parts in the air path.

I love the build quality, but after doing dozens of initial burn-offs, I'm getting a strong plasticizer-like odor when I pull air with the unit on. I figured it could be the silicone gasket in the cooling unit, but even when I remove it, I'm still getting the odor/taste from the main unit.

I'm also getting a loud buzzing from the heating chamber (I can hear it with the cap on). I know a lot of these portables use PWM to heat the chambers, but this was the loudest I've come across.

I was just wondering if anyone else experienced these things, or if this is a bad unit.

i'd say your unit may be defective. the only time i hear a buzz is when it reaches temp. high temp silicone should not taste or smell it rated to 550 to 600c. i'd do a warranty thing. email manufacture.

goto page one here
refer to this response from manufacture:

Nov 9, 2023


ANSWERS to the most important questions, i asked nectar Hex's company
nectarmedicalvapes.com

 

[4u0o]

i'd say your unit may be defective. the only time i hear a buzz is when it reaches temp. high temp silicone should not taste or smell it rated to 550 to 600c. i'd do a warranty thing. email manufacture.

goto page one here
refer to this response from manufacture:

Nov 9, 2023


ANSWERS to the most important questions, i asked nectar Hex's company
nectarmedicalvapes.com

Hey there, thanks for your reply!

So you do hear a buzz on your unit as well? Did you have any chemical/synthetic odors in the pulls initially?

I did see your questionnaire and that was part of the reason that I purchased my unit, but the fact that I'm getting this odor at all has me a bit worried about their claims of a completely isolated air path free of contaminants. It would also be strange that there would be a problem with the composition of the silicone only in some of the batches, so I'm just trying to figure out what could have gone wrong here if it is indeed a defective unit that I received.

Thanks.

 

[seedy53]

Hey there, thanks for your reply!

So you do hear a buzz on your unit as well? Did you have any chemical/synthetic odors in the pulls initially?

I did see your questionnaire and that was part of the reason that I purchased my unit, but the fact that I'm getting this odor at all has me a bit worried about their claims of a completely isolated air path free of contaminants. It would also be strange that there would be a problem with the composition of the silicone only in some of the batches, so I'm just trying to figure out what could have gone wrong here if it is indeed a defective unit that I received.

Thanks.

i can't say i've not aware of this kind of problem. as far as i can tell, the silicone grommets on moveable zirconia mouthpiece and oven screen holder function is to seal the unit from leaking are not in the airpath ser se. i don't have buzzing or any smell or taste. that's all i know, tbh. contact the people you bought from or manufacture and get new or refund.

 

[Flotsam]

I still have this on my VAS list. seedy do you happen to have any details on that mouthpiece? To be honest i think i like this better than the original one.

 

[seedy53]

I still have this on my VAS list. seedy do you happen to have any details on that mouthpiece? To be honest i think i like this better than the original one.

on the older pages i think i gave the links. try this guys og post on the set-up

Vapinski​

however that 510 drip tip is sold out.

https://www.wish.com/product/6513e7480ce70dcb8f3e2e0c?source=search&position=0

found it here after 45mins of looking
don't know anything about this company but the have the tips. you may need a 810 to 510 adapter. that it for my efforts lol

$1.99 Long Glass & Stainless Steel Wide Bore Read Drip Tip - Angled or Straight Fit Smok Tfv12/Tfv8 Tank

Angled / Straight Long Glass & Stainless Steel Wide Bore Drip Tip

www.vapeyaya.com

$2.95 Steel Drip Tip Adapter For 810 To 510

Steel Drip Tip Adapter For 810 To 510

www.vapeyaya.com

you will need these o-rings not the other guy's o-rings- remove the ones on the 510 threaded end
got mine on amazon

Silicone O-Rings, 3mm Inner Diameter, 7mm OD, 2mm Width Seal Gasket 5pcs​

silicone o-rings

 

[Gouki883]

Hi All,

Just bought this vape, mainly for hash use, has taken me some time to get use to it, and started to appreciate it, actually quite like it, I'm looking for alternative dosing capsules, I've seen the ones they sell is in aluminum now, not like the one that comes in the box, the steel capsule is 10mm height and 12mm wide, does anyone know if other capsule like the XMax V3 pro for instance fits the Hex? Or any other ?
Thanks!

 

[Flotsam]

Hi All,

Just bought this vape, mainly for hash use, has taken me some time to get use to it, and started to appreciate it, actually quite like it, I'm looking for alternative dosing capsules, I've seen the ones they sell is in aluminum now, not like the one that comes in the box, the steel capsule is 10mm height and 12mm wide, does anyone know if other capsule like the XMax V3 pro for instance fits the Hex? Or any other ?
Thanks!

I had been doing a bit of a mini project for something else i had been playing with. I had been collecting sizes from devices i have like the POTV Lobo plus i few others that i had bought to try, Back soon

This is still on my VAS list!

 

[seedy53]

Hi All,

Just bought this vape, mainly for hash use, has taken me some time to get use to it, and started to appreciate it, actually quite like it, I'm looking for alternative dosing capsules, I've seen the ones they sell is in aluminum now, not like the one that comes in the box, the steel capsule is 10mm height and 12mm wide, does anyone know if other capsule like the XMax V3 pro for instance fits the Hex? Or any other ?
Thanks!

don't know, but not thinking any other will work. keep us informed. i use vape cotton with crumbled hash on top with a little more vape cotton on top. heat setting 464f max

 

[Gouki883]

don't know, but not thinking any other will work. keep us informed. i use vape cotton with crumbled hash on top with a little more vape cotton on top. heat setting 464f max

I only use some hemp fiber at the bottom of the capsule, then press down the hash with the tool, I've tried so far between 220° to 235°, I push to the max if I want a quick extraction, otherwise 225° seems to be a good spot, with more closed airflow, for shorter pulls rather than long ones. Sometimes I use three ruby balls of 3mm on top of the hash, but I didn't notice a huge difference without. Now on a mission to find compatible capsule as I think steel is better for hash over aluminum.

 

[seedy53]

I only use some hemp fiber at the bottom of the capsule, then press down the hash with the tool, I've tried so far between 220° to 235°, I push to the max if I want a quick extraction, otherwise 225° seems to be a good spot, with more closed airflow, for shorter pulls rather than long ones. Sometimes I use three ruby balls of 3mm on top of the hash, but I didn't notice a huge difference without. Now on a mission to find compatible capsule as I think steel is better for hash over aluminum.

i use a custom mouthpiece cooler bigger hits. i use 5- 3 or 4mm rubies just under the screen section in the head, too. really helps with cooling and flavor. if you go back a few posts up on this page . it is talked in detail about it.

 

[Gouki883]

i use a custom mouthpiece cooler bigger hits. i use 5- 3 or 4mm rubies just under the screen section in the head, too. really helps with cooling and flavor. if you go back a few posts up on this page . it is talked in detail about it.

Yes, I read that, interesting and I'll get that too ! As the original mp doesn't come off easily, I'll try the Ruby balls trick as well.
I found out that the stainless steel capsules for tiny might 2 are 11mm H x ~11.5mm W. Almost there, I'm not sure if that extra mm in H will prevent to close the CU properly, (the nectar capsule is 10mm H - 12 mm W) I also contacted the Nectar customer service they said they may go back to steel capsules in a few months time!

 

[Flotsam]

POTV Lobo dosing capsules have a diameter of 12mm and a height of 10mm. That is a nominal size, i pulled out my micrometer and i measure 10.7 h x 12.4 dia, so worth a try