Nectar Hex

[Vapinski]

Excuse my hack spamming, but this is perhaps the last one for now and is a pretty solid one.

Rubies can go in the zirconia cooling unit to provide additional cooling/absorption. I have managed to squeeze in seven 3mm rubies and two 2mm rubies without compromising the airflow.

Just take the silicone/screen part off and reveal the sort of hole shape of the cooling unit and stuff the rubies in there and put the silicone back on. I have found that doing this not only continuously improves the mouthpiece hack, but actually made a huge difference when using the stock mouthpiece as well.

https://imgur.com/a/RXWmp9P

 

[seedy53]

Yeah, Wish is a pretty slow website, such is the nature of china websites like it. I think the first time I ordered them it took about two weeks. I’ve since realized you live in the UK, but that was originally why I offered to send one.

The ID of the o-rings are a bit narrow so it does have to be stretched to fit, but unfortunately I haven’t seen a size or option that might fit snug. Some of the ones that I bought have broken, whether it be from the stretching or heat or too much fiddling, I am unsure, but I located some on Amazon finally that are the same size needed and made from silicone with a heat resistance of 450 F so I’m hoping those will be better quality but it only comes in a variety pack, they should arrive tomorrow. I think I will start looking for sizes that might fit and take a chance to get something more perfect.

Here is the link if you’d maybe prefer to return those and get these to heir on the side of caution, they’re the only ones I could find on Amazon with this heat resistance and size: https://a.co/d/gymc3CC
Ordering from actual o-ring sites seems to require bulk purchasing and they’re rather confusing to me: unless you have any ideas this is the best I’ve got. Trial and error, you know.

Yes, that is all you have to do. Take the stock rings off and put the new ones on with a little stretch effort and it goes right in.

i live in usa deep south.

 

[Vapinski]

i live in usa deep south.

My apologies I thought I saw you say that on Reddit somewhere, must’ve been a trick of the eye.

 

[seedy53]

My apologies I thought I saw you say that on Reddit somewhere, must’ve been a trick of the eye.

deep cleaning my cooling unit and the receiver and mp sections of hex, after 6 months medium use is a messy/clogged bitch, i'm going to soak all that stuff to get it out of those nooks and crannies. an ultrasonic cleaner would come in handy. but alas, poor seedy53, is a cheap old lady. lol

 

[Vapinski]

deep cleaning my cooling unit and the receiver and mp sections of hex, after 6 months medium use is a messy/clogged bitch, i'm going to soak all that stuff to get it out of those nooks and crannies. an ultrasonic cleaner would come in handy. but alas, poor seedy53, is a cheap old lady. lol

Oh wow, that is quite a long time without cleaning! I usually go about a week at most. I don’t know how much heat resistance zirconia has, but I’ve sometimes done things like put it in the oven or even burning off with a torch to help get the resin off of glass and metal.

 

[seedy53]

Oh wow, that is quite a long time without cleaning! I usually go about a week at most. I don’t know how much heat resistance zirconia has, but I’ve sometimes done things like put it in the oven or even burning off with a torch to help get the resin off of glass and metal.

it was a test to see how long it would function without deep cleaning. i'll figure out. i could always dip the zirconium in acetone, if i need too lol

 

[Vapinski]

Check this one out: I happened to have this sleeve lying around that is made to harbor tube mods for nicotine vaping and it is a perfect fit for the Hex.

Desce Pouches (HUGE RESTOCK SALE)

DESCE POUCHESDesigned, Manufactured & Curated from:Los Angeles, California.Premium/Top-Shelf Pouches with shock absorption to protect your gear. They are also gorgeous, functional, and make you look and feel even more badass ;)No other 'pouch' in the world is even CLOSE to the quality of Desce...

coilclout.com

https://imgur.com/a/JHQlmUz

 

[seedy53]

still have not received mp package from wish post . it's been released from usa customs since 4-29 and no info or update data since then. looks like i get screwed again from china order

 

[Vapinski]

still have not received mp package from wish post . it's been released from usa customs since 4-29 and no info or update data since then. looks like i get screwed again from china order

It will come, I’ve never not had anything arrive from there and have ordered tons of times.

 

[seedy53]

It will come, I’ve never not had anything arrive from there and have ordered tons of times.

wish store their mp. for nectar hex
it's in LA, cali but their time for delivery is
Estimated delivery: Jun 23, 2024
if true, never again lol.


wish

 

[Vapinski]

wish store their mp. for nectar hex
it's in LA, cali but their time for delivery is
Estimated delivery: Jun 23, 2024
if true, never again lol.


wish

I made three different orders around the same time you made yours and have received them all without issues. It’s a bummer your package is taking so long. Perhaps it’s because I am in Seattle which is much closer, but hopefully it arrives soon.

 

[Vapinski]

Hello again, I found another neat mouthpiece hack for the Hex that uses some similar elements of the other one I shared but this time you can connect a Dynavap stem to the Hex.

It takes three items:

- Simrell Mighty Adapter
- 510 to 510 heat sink from Wish
- 9x2mm o-rings from Amazon

Then you can attach any stem. Mine is a Simrell MicroVap.

https://imgur.com/a/eqWaxyn

 

[Petetbay]

Hello again, I found another neat mouthpiece hack for the Hex that uses some similar elements of the other one I shared but this time you can connect a Dynavap stem to the Hex.

It takes three items:

- Simrell Mighty Adapter
- 510 to 510 heat sink from Wish
- 9x2mm o-rings from Amazon

Then you can attach any stem. Mine is a Simrell MicroVap.

https://imgur.com/a/eqWaxyn

If the Simrell Mighty/Dynavap adapter works there is a cheaper option of a SS adapter for less than $10. Vgoodies and Recommended Vapes carries them.

Crafty/Mighty 8mm Stem Adapter by VGoodiEZ (CM13)

Add your favorite Dynavap stem to the end of your Crafty or Mighty for ultimate cooling and customizability! Works with most 8mm diameter stems. Remove the Crafty/Mighty mouthpiece, insert this and then you have a fitting for any 8mm stem! Made from food grade 304 stainless steel...

vgoodiez.com

Mighty/Crafty to DynaVap Adapter

Th Mighty to DynaVap Adapter allows any DynaVap stem to be used as a mouthpiece for the The Storz and Bickel Mighty Vaporizer! Simply remove the Mighty Mouthpiece and replace it with this adapter, then pop your favourite DynaVap stem on to the adapter!

recommendedvapesupplies.co.uk

 

[seedy53]

I made three different orders around the same time you made yours and have received them all without issues. It’s a bummer your package is taking so long. Perhaps it’s because I am in Seattle which is much closer, but hopefully it arrives soon.

well it's sitting in dallas/fort worth airport on apirl 29th and never seen again- no movement, no updates i'll file for refund june 23rd
don't have dynavap nor and ted stem. so hell with it.

 

[Vapinski]

If the Simrell Mighty/Dynavap adapter works there is a cheaper option of a SS adapter for less than $10. Vgoodies and Recommended Vapes carries them.

Crafty/Mighty 8mm Stem Adapter by VGoodiEZ (CM13)

Add your favorite Dynavap stem to the end of your Crafty or Mighty for ultimate cooling and customizability! Works with most 8mm diameter stems. Remove the Crafty/Mighty mouthpiece, insert this and then you have a fitting for any 8mm stem! Made from food grade 304 stainless steel...

vgoodiez.com

Mighty/Crafty to DynaVap Adapter

Th Mighty to DynaVap Adapter allows any DynaVap stem to be used as a mouthpiece for the The Storz and Bickel Mighty Vaporizer! Simply remove the Mighty Mouthpiece and replace it with this adapter, then pop your favourite DynaVap stem on to the adapter!

recommendedvapesupplies.co.uk

Perfect, I didn’t know of its existence.

 

[Vapinski]

well it's sitting in dallas/fort worth airport on apirl 29th and never seen again- no movement, no updates i'll file for refund june 23rd
don't have dynavap nor and ted stem. so hell with it.

Just let me send you one already!

 

[seedy53]

Just let me send you one already!

chat in reditt

 

[NaujtyOlBaper]

Hello, I'm interested in this vaporizer, does anybody have tried it with hashish? Preferably the dense Moroccan style one you find in the EU.

I need a device capable of handling both hash and weed and sequeeze both as much as possible.

Thanks in advance!

 

[seedy53]

Hello, I'm interested in this vaporizer, does anybody have tried it with hashish? Preferably the dense Moroccan style one you find in the EU.

I need a device capable of handling both hash and weed and sequeeze both as much as possible.

Thanks in advance!

i've done it without a bong- unit is not good for upside use with a bong.
with a bong, it needs to be vaped in an upright position using their a whip attachment.

for hash, i use a thin layer of vape cotton or hemp fiber vape wool,
then crumble some hash, spread-out on that vap cotton,
then add another thin layer of cotton on top of hash. pack lightly

set unit temp to max. wait 30 sec or maybe a 1 min of heat soak.
then do slow, long 10 sec draws, direct to your lung hits .
vape until it tastes bad or no more vapor. you can turn down the heat after the vapor is producing vapor well. around 440f

always clean oven when unit is still warm with 91% iso -use q-tips, turn unit upside upside down to clean-out oven with wet iso q-tip/cotton sticks.
then do cleaning burn-offs.
it cleans the iso residue
do burn-off with empty bowl, at max temp. do 2- 3 min sessions.
ready to go.
you can add crumbled hash on top of ground flower in oven too. - concentrates too-twaxing

 

[NaujtyOlBaper]

i've done it without a bong- unit is not good for upside use with a bong.
with a bong, it needs to be vaped in an upright position using their a whip attachment.

for hash, i use a thin layer of vape cotton or hemp fiber vape wool,
then crumble some hash, spread-out on that vap cotton,
then add another thin layer of cotton on top of hash. pack lightly

set unit temp to max. wait 30 sec or maybe a 1 min of heat soak.
then do slow, long 10 sec draws, direct to your lung hits .
vape until it tastes bad or no more vapor. you can turn down the heat after the vapor is producing vapor well. around 440f

always clean oven when unit is still warm with 91% iso -use q-tips, turn unit upside upside down to clean-out oven with wet iso q-tip/cotton sticks.
then do cleaning burn-offs.
it cleans the iso residue
do burn-off with empty bowl, at max temp. do 2- 3 min sessions.
ready to go.
you can add crumbled hash on top of ground flower in oven too. - concentrates too-twaxing

Thanks for the answer! I was expecting it to work fine with hash based on its specifications but is nice to have confirmation.

I don't really like or use bongs so that's a non issue and I really like the hex design and capabilities, I think probably this will be my next purchase, although sadly not anytime soon

 

[Vapinski]

Thanks for the answer! I was expecting it to work fine with hash based on its specifications but is nice to have confirmation.

I don't really like or use bongs so that's a non issue and I really like the hex design and capabilities, I think probably this will be my next purchase, although sadly not anytime soon

Glad to have you on board the tiny train we’ve got going here. It’s a great device and deserves appreciation for its whole package it’s got going on.

 

[seedy53]

Glad to have you on board the tiny train we’ve got going here. It’s a great device and deserves appreciation for its whole package it’s got going on.

can you dm me?

 

[Ssscrudddy]

Thanks for this. I've broken 3 of the original mouthpieces now & don't wanna buy any more, they're so fragile.
I bought some Silicone O-Rings, 3mm Inner Diameter, 7mm OD, 2mm Width. I have a few standard 510 drip tips laying around, I also bought some of the ones you linked. It works great!

Check it out, a custom mouthpiece!
It’s a slightly modded 510 drip tip, seals perfectly and drastically helps mitigate the heat of not just the mouthpiece but seemingly the entire device. It’s really wonderful and honestly makes the Hex 10x better for myself.
I highly recommend trying it, just slip 2 extra o-rings to the end of a drip tip and lightly twist as you insert it into the vaporizer. it should make a seal if the sizing is right.

Not to mention any 510 drip tip could potentially work. As for these glass ones: https://www.wish.com/product/6513e7480ce70dcb8f3e2e0c?source=search&position=0

https://imgur.com/a/3a95YfE

 

[kokolokokolokon]

Finally i can try this device.
it is charging, but i can say it feels top notch built

 

[seedy53]

Finally i can try this device.
it is charging, but i can say it feels top notch built

too me it's built like a tank but standard mouth piece, kinda sucks. it's easy to break the mp if you are not careful