Dr. G
Vapman Collector*Vapman Beta Tester
I will look into that...thank you kindly.
MiniVAP Vaporizer
- Thread starter stinkmeaner
- Start date
vapormachina
Well-Known Member
Yep, that's true, with the baskets this seems to be almost full convection
I usualy try to maximize the conduction, the minivap has so good taste that even doing this it's difficutl to have a big popcorn flavour, but with the baskets you have even a more neutral experiencie
The wall charger is a good solution, the greatest weight is in the batteries, without them the device is very light
MinnBobber
Well-Known Member
@Dr. G
X2. The AC puck weighs almost nothing vs the big heavy battery. With the puck, it is very lightweight as the top section is also very light weight!
Well worth the price !!!
Dr. G
Vapman Collector*Vapman Beta Tester
Thank you for the tip! I appreciate it very much.
MinnBobber
Well-Known Member
@Dr. G
Weighed for the heckuva it.
Battery plus top module: 461 G
Battery 262 G
Top 198 G
Base puck 37 G
AC puck plus top module: 235 G
FYI, I would have guessed the AC puck unit weighed 1/3 or 1/4 of battery unit.
In real life feel, it is a featherweight.
And…. Much more compact and easier to handle…as long as you are aware of the cord.
Enjoy your new piece.
There are so many ways to use it.
Edit: weight issue.
Several years ago I suggested to Jorge to make a battery 1/3 of current size….since it has huge battery life now.
Weighed for the heckuva it.
Battery plus top module: 461 G
Battery 262 G
Top 198 G
Base puck 37 G
AC puck plus top module: 235 G
FYI, I would have guessed the AC puck unit weighed 1/3 or 1/4 of battery unit.
In real life feel, it is a featherweight.
And…. Much more compact and easier to handle…as long as you are aware of the cord.
Enjoy your new piece.
There are so many ways to use it.
Edit: weight issue.
Several years ago I suggested to Jorge to make a battery 1/3 of current size….since it has huge battery life now.
Dr. G
Vapman Collector*Vapman Beta Tester
That is awesome info...Jorge is a truly nice person. It is a wonderful product that is certain. I wish more people would know about it. It has to be one of the top five vapes around. There are only a few good vapes for taste...that is certain. This is one for taste. I used the vape with the smaller piece...it is so much lighter...excellent for me. Thank you.
Monkeragon17
Member
Hi everyone, this is my first post here so sorry if it’s not formatted right. I recently went on holiday to the Netherlands (from UK) and while there bought an arizer air and a minivap in Amsterdam. The first few times I used the minivap it took quite a long time to reach temp but the temperature light did eventually stop blinking. After the first couple of uses however I have noticed that no matter how long it’s left on for the temp light does not stop blinking. If I put my finger in the bowl I can feel that’s it hot in there but the light keeps blinking and not much vapour comes out even on red. I thought that the battery might be old and that might be the issue but the issue persists even when using the AC puck. Since I bought it abroad I’m not sure exactly what model it is or when it was manufactured. Has anyone else had this issue? I’m hoping there’s some kind of quick fix so I don’t have to send it back. Thanks all.
deadlytoaster
Canadian lost in Europe
How many temperature settings does it have? My MV will often blink as I draw as it senses odd temperature. How full are you loading the bowl and with ground herb? Or are you using baskets?
I recommend contacting CS for MiniVap - they're always been very helpful to me
Monkeragon17
Member
It’s the four temp model not the seven. I use baskets but have tried a direct pack, didn’t make that much difference. I don’t know if the temp sensor has an issue but it’ll just keep blinking no matter how long I leave it. I have sent them a message but they’re on holiday at the moment I think.How many temperature settings does it have? My MV will often blink as I draw as it senses odd temperature. How full are you loading the bowl and with ground herb? Or are you using baskets?
I recommend contacting CS for MiniVap - they're always been very helpful to me
Is the teflon core a really on demand vape, I mean no cook between hits?
I read that the teflon core is known to being one of the best vape for taste and vapor quality in general so, when the flavor shines and when significantly decrease with the small and the bigger basket screen? I mean how many hits in general, but I know there are lot of variables, or in which phase of a bowl (half, beginning, etc.)
How does it behave for micro dosing?
I read that the teflon core is known to being one of the best vape for taste and vapor quality in general so, when the flavor shines and when significantly decrease with the small and the bigger basket screen? I mean how many hits in general, but I know there are lot of variables, or in which phase of a bowl (half, beginning, etc.)
How does it behave for micro dosing?
condition
Well-Known Member
The whole core unit must feel hot, not just the bowl. Does your unit feel hot after 10 minutes off warming up?
vapviking
Old & In the Way
I've not used small basket or small loads, though I think they'd work just fine.
There is almost no "cooking" of the load between hits.
Great flavor maintains almost to the end.
I think I get more hits/tastier hits per a given amount with the MV than with, say, a Mighty.
The unit should reach a point when the light stops blinking, so that seems to be a problem.
There's some chance you have a leak somewhere in vapor path, so your draw is not pulling air up from the core heater?
But I think you need a repair.
Abele Rizieri Ferrari
Well-Known Member
There have been some issues with faulty adapter pucks also recently, though the battery also not working in the above case indicates a different problem. It is the same error though, with the light blinking and not reaching sufficient temp.
vapormachina
Well-Known Member
interesting idea
at the end I never go out with my MV, its very big and heavy but maybe with a 3x 18350 battery you can use it outside, put in the bike backpack or wherever
MinnBobber
Well-Known Member
New owners:
IMO the best accessory for the MiniVAP is the @Delta3DStudios water pipe adapter.
Silicon lid that securely fits on cover.
It makes opening the unit much easier and also acts as a cool grip / never gets hot.
Note that it allows use with:
- water piece adapter where you invert mv
- water piece adapter where you use hydratube and mV is upright
- glass long mouthpiece like from @Oregonglassblower
-if you own a Herbalizer, it allows so to use just the MV cover/ Flexicone modules in it, for a 30 second complete session….
I would post pics if/ when we get easy method back.
IMO the best accessory for the MiniVAP is the @Delta3DStudios water pipe adapter.
Silicon lid that securely fits on cover.
It makes opening the unit much easier and also acts as a cool grip / never gets hot.
Note that it allows use with:
- water piece adapter where you invert mv
- water piece adapter where you use hydratube and mV is upright
- glass long mouthpiece like from @Oregonglassblower
-if you own a Herbalizer, it allows so to use just the MV cover/ Flexicone modules in it, for a 30 second complete session….
I would post pics if/ when we get easy method back.
sdrsh
Well-Known Member
Nice! Always hitting mine dry with a bb9 attached with a dynavap condenser connection nowadays. Not the best look but flavor and fluffy clouds for sure! Love the low maintenance and simplicity of loading and dumping.
but wait, there are FC shirts out there? Who does one have to bribe for one of these?
I'd wear one to start conversations with burners and find fellow connoisseurs in the wild
but wait, there are FC shirts out there? Who does one have to bribe for one of these?
I'd wear one to start conversations with burners and find fellow connoisseurs in the wild
GoldenBud
Well-Known Member
BEAST
condition
Well-Known Member
@vapviking it is a difficult question, you have to ask directly. I know about the battery update option offered with charge, 60 eur, of course. More info:
From MiniVAP we offer a way to renew your old MV Battery.
Our technical service replace your old Li-Ion cells to get:
Product Description
From MiniVAP we offer a way to renew your old MV Battery.
Our technical service replace your old Li-Ion cells to get:
- The maximum capacity and biggest performance than a new MV battery.
- The old cells are send to a safe place for recycling.
- replacement of the internal battery cells by new ones
- cleaning and replacement up to 2 broken pieces
- shipping back to customer’s address
Abele Rizieri Ferrari
Well-Known Member
Yeah sure worth trying. One of the thing I like about MV is how it can be upgraded with minimum waste. If that's the company philosophy this might be possible as well.
vapviking
Old & In the Way
Yes, thanks for this reminder, and I think it is probably the same answer I would get from Spain.
Since my issue is cosmetic and not too bad, I think I'll wait a while until I see degradation of battery and then consider this service. Sending for service from and back-to US is a bit expensive.
So I think I will drop them a note, see what they might be able to do...
jasp3r
Well-Known Member
You got pics?Nice! Always hitting mine dry with a bb9 attached with a dynavap condenser connection nowadays. Not the best look but flavor and fluffy clouds for sure! Love the low maintenance and simplicity of loading and dumping.
but wait, there are FC shirts out there? Who does one have to bribe for one of these?
I'd wear one to start conversations with burners and find fellow connoisseurs in the wild