coolbreeze
Well-Known Member
I tested this last night on the station. .02g in the click before and after ~4 hits:
-
SCAM WARNING! See how this scam works in Classifieds.
Micro-dosing
- Thread starter stressed
- Start date
Fearless Disaster
Well-Known Member
you, sir, are a gentleman and a scholar!I tested this last night on the station. .02g in the click before and after ~4 hits:
darkstar72
Well-Known Member
I dose roughly the same amounts with my self made @Alan design clone 7/16” heater cover log.I read the diy misty vape thread and the HI thread to learn how. Always thought if someone mass produced logs in Asia or something retail price could be quite low. Was just looking at the vapman lotus website and thought those guys have the technology to mass produce logs…
The click is also a must have for me. By heating the cap in the upper/middle odr lower area I can best control the final heat, wihich is very important for me when microdosing (0,005g). I also really like to mix additional CBD flowers with Thc-containing ones.
Perfect_Speed4069
I am the beetle in a box that only you can see
@coolbreeze Mine got a little toastier after 4 with a torch. 4 beats per heat cycle with a £4 Jobon flint single flame
coolbreeze
Well-Known Member
Ah, I'm gonna have to try the screen then. How long are your beats?
Perfect_Speed4069
I am the beetle in a box that only you can see
4 beats is about 3.5 seconds for me.
I also really wonder what impact moisture levels play. I keep mine jarred with a 58% Boveda pack
Also, flame size is about 1 inch outer, .5 inch inner
Last edited:
coolbreeze
Well-Known Member
Awesome! I'm gonna have to try this method, I've usually done 3 rounds of 2-3 seconds each. My herb's at 62 percent with packs--I bet that's a good part of it.
Fearless Disaster
Well-Known Member
Check out the microdosing scoop @Delta3DStudios made for me! Its on the left. In the middle is the standard delta3d scoop for reference. i was always trying to eyeball fractions of the big scoop, this new one makes it super easy!
Thanks for the shoutout! That's the fun part - I can customize any of my scoop tools to fit your personal needs for which bits are on either end, different size scoop, etc. I'll absolutely be publishing this micro scoop-n-poke as a new product on the store in the next few days. I have one more copy of the prototype ready to ship (and as always I take requests if you'd like a custom version to fit your own needs)
Fearless Disaster
Well-Known Member
Well, with todays sale at inhale I pulled the trigger on a vapman and heating station. I figure I can't properly do microdosing reach tests without one of those within reach! As mentioned earlier in this thread I am looking to vape 10-20mg amounts and I have a question about that. I have never seen a vapman in person but i imagine the material needs to be in contact with the heating plate for the vapman to work right. But I see people holding the vapman horizontally while using. Should this work for the amounts I'm looking at or should i keep the vapman upright? I guess I am worried that with such small amounts if i hold it horizontally it wont work. What do you think?
You are overthinking it. There is like a mm of space between the bowl and the middle section. You'll see when you get the vapman. No need to worry prematurely.
coolbreeze
Well-Known Member
It'll work just fine:
Micro-dosing
Ok so my question is I only have a PAX at the moment. Hopefully soon i would get a POTV Lobo. How would i go about accomplishing that with either of those devices? I cause i should ask which devices are best for Micro-Dosing then too . What do you use? I see in...
fuckcombustion.com
Congrats on your purchase, you are gonna love it! Did you get a Click or a V2? The V2 should be perfectly simple, the Click will work fine but with a little fiddling to seat it well.
Fearless Disaster
Well-Known Member
Thank you! Overthinking is what i do best
Well that and preemptive accessory vas before the device even arrives lolThanks coolbreeze! And thank you so much for your help earlier in the thread! This wouldn't have happened without you!
EDIT: I forgot to answer your question @coolbreeze. I got a v2. i wasn't sure that the click could handle the same small amounts and have been seeing reports of people having issues with their clicks. but the click is available in purpleheart so i did actually think about it a bit this morning! I do loves me my olivewood though.
Last edited:
Thanks, this topic makes me not feel like an idiot.. 
My standard small dose is 0.025 g.. Used it every day for one month without any visible decrease in effect . (light MJ, think 10 - 15% THC).
When I increase the dose, weekends, holidays, or just like that I take breaks 3-5-7+ day if I want to get back to 0.025g. +"Sober October" and sometimes just a couple of weeks. But in general, I prefer 50 mg, it already allows to be high. LOL.
10-15 mg does not have a very good effect, I do not know how to say: I did a little negative feelings (This may be due to incomplete evaporation in the device (Glo), I'll try it with Mighty someday).
Jewelry scales 0.01g are absolutely necessary.
I tested microdosing with Mighty+ with a capsule. 30mg, 210℃. I put cotton wool* for Vape (for spiral POD systems) in the capsule, poured MJ and cotton wool* on top too (Storz & Bike recommend filling the capsule tightly, but how can you fill it tightly with so much without changing the volume?? LOL). The impact is very good.
* "cotton wool" wrong - right "linseed wool". ("Flax", "Linen" - What's the right thing?). Very clean, 100%. No aftertaste at these temperatures.
I use induction tobacco heating system "Glo Hyper+" for 3 years (price 2021 = from free on promotion to $5, now, 2025 = $7). T=240 ℃ / T turbo =260 ℃. In fact, it is a low-power conduction vaporizer. But the manufacturer (BAT) doesn't know about it
But the optimal amount for it is 50-100mg. If it's more, it starts to burn. If less, there is some decrease in efficiency.
A new model is on sale, "Glo Hyper Pro", (price 2025 = $14). According to reviews, it heats up more. I didn't buy it, and I don't know how it works with microdoses. I think it's better.
I Buy a Storz & Bikel Mighty +
My standard small dose is 0.025 g.. Used it every day for one month without any visible decrease in effect . (light MJ, think 10 - 15% THC).
When I increase the dose, weekends, holidays, or just like that
I take breaks 3-5-7+ day if I want to get back to 0.025g. +"Sober October" and sometimes just a couple of weeks. But in general, I prefer 50 mg, it already allows to be high. LOL.10-15 mg does not have a very good effect, I do not know how to say: I did a little negative feelings (This may be due to incomplete evaporation in the device (Glo), I'll try it with Mighty someday).
Jewelry scales 0.01g are absolutely necessary.
I tested microdosing with Mighty+ with a capsule. 30mg, 210℃. I put cotton wool* for Vape (for spiral POD systems) in the capsule, poured MJ and cotton wool* on top too (Storz & Bike recommend filling the capsule tightly, but how can you fill it tightly with so much without changing the volume?? LOL). The impact is very good.
* "cotton wool" wrong - right "linseed wool". ("Flax", "Linen" - What's the right thing?). Very clean, 100%. No aftertaste at these temperatures.
I use induction tobacco heating system "Glo Hyper+" for 3 years (price 2021 = from free on promotion to $5, now, 2025 = $7). T=240 ℃ / T turbo =260 ℃. In fact, it is a low-power conduction vaporizer. But the manufacturer (BAT) doesn't know about it
But the optimal amount for it is 50-100mg. If it's more, it starts to burn. If less, there is some decrease in efficiency.
A new model is on sale, "Glo Hyper Pro", (price 2025 = $14). According to reviews, it heats up more. I didn't buy it, and I don't know how it works with microdoses. I think it's better.
I Buy a Storz & Bikel Mighty +
Fearless Disaster
Well-Known Member
I wanted to give an update on this microdose scoop. With the material i currently have each scoop holds about 20mg, ranging from 15-30mg depending on how level it is. I like a 20-25mg dose so this scoop is spot on for me.
sansei
good vibes only
does your scoop have a smooth finish, or is it rough? I was surprised to find mine had a rough finish, but figured I just didn't read the description well.
Fearless Disaster
Well-Known Member
all my tools from him have a rough finish. I'd prefer smooth and shiny, but tbh I am surprised that nothing really sticks to it so functionally its kind of a nonissue
borbjorbis
Well-Known Member
After a half decade in the dynaverse, I finally tried the dynacoil. It's absolutely fantastic for microdosing concentrates! Super flavorful, and works wonders with dabs the size of a large grain of salt.
It might just be the best concentrate microdoser I have now. I find that a lot of the products bemoaned by the average consumer chasing the biggest hits are often the best for microdosing. I feel similarly about the Puffco Plus.
It might just be the best concentrate microdoser I have now. I find that a lot of the products bemoaned by the average consumer chasing the biggest hits are often the best for microdosing. I feel similarly about the Puffco Plus.
Last edited: