Induction Heater MAD Heaters - Innovative Dynavap Accessories

OGablogian

AKA Probeer
Not quite sure yet, but I’m thinking of mixing raw + PVD colors for the new case.

Sounds great, im looking forward to the reveal ^^


Why do I feel like I need some bourbon right now? This setup seems so bourbon-esqe for some reason.


Nice look indeed. Modern meets classic. Liking your choice of tip as well; 19M phantom, right? That thing really rips.
 
Last edited:

OGablogian

AKA Probeer
Thank you. The tip is a 7-fin LE.
My apologies, I totally mis-looked. That's a really really nice one, congrats on that <3

Someone on the interwebs asked for a video about how to use the reload, so my high ass made him a quick one on a lazy sunday-aftermorning. Thought I'd share here as well. Please excuse the avb spill, normally never happens, but had to keep everything in frame without my hand blocking the camera.


Also, and I'm only really learning this after months of daily use ... Using the decapper and magnet makes it really easy to literally never touch my caps with my greasy fingers again, keeping them looking very clean. Just discoloration due to heating, but no more dirt that gets baked in.


This is my daily cap, havent cleaned it in a month.
 

fucreg123

New Member
I want to get the holy trinity once the IH becomes avail. Do you guys ship from EU also? Or from Thailand? I could either receive it in EU or Thailand!
 
fucreg123,

Brenyo

Well-Known Member
Manufacturer
Any way to become a beta tester? :)
Not anymore for this round unfortunately, beta is over a while ago and the release model is in production already. Only way to get a beta now is to leave a review on the website, I'll pick quite a few customers from there, hopefully next week. ;)

I want to get the holy trinity once the IH becomes avail. Do you guys ship from EU also? Or from Thailand? I could either receive it in EU or Thailand!
Smile and Folk will have stock in Thailand
 
Not anymore for this round unfortunately, beta is over a while ago and the release model is in production already. Only way to get a beta now is to leave a review on the website, I'll pick quite a few customers from there, hopefully next week. ;)
That'll teach me to ignore those email requests for feedback! Luckily still had the one from my reload buried in my inbox. I think this counts as the first time I ever voluntarily joined a lottery.
 
Notcoded419,
  • Like
Reactions: Brenyo

Misterhyde

Well-Known Member
Not anymore for this round unfortunately, beta is over a while ago and the release model is in production already. Only way to get a beta now is to leave a review on the website, I'll pick quite a few customers from there, hopefully next week. ;)


Smile and Folk will have stock in Thailand
Woohoo! I love the Revolve. I left a review, fingers crossed I am one of the lucky few. 😀😃😄🤞
 
Misterhyde,
  • Like
Reactions: Brenyo

Brenyo

Well-Known Member
Manufacturer
@Brenyo Not sure if you offered it in the past, but could you offer for purchase the Revolve without the Ti stem? I have 2 Revolves and prefer using the glass stem, so I would rather just purchase the mp/condenser along with the glass stems. Possible? 🐼
Yeah we can sort that out, no problem 🙂 Please get in touch before placing an order.


We're almost finished with the updated manual for the Gen 2 ( Thanks @kel! :tup: )
What do you guys think? Is it easy enough to understand or way too much info? :D

Revolve Gen 2 Manual preview
 
Last edited:

OGablogian

AKA Probeer
Yeah we can sort that out, no problem 🙂 Please get in touch before placing an order.


We're almost finished with the updated manual for the Gen 2 ( Thanks @kel! :tup: )
What do you guys think? Is it easy enough to understand or way too much info? :D

Revolve Gen 2 Manual preview

First off, I like how it neatly fits on two pages. Call me lazy, but I dislike having to scroll through a multiple page file.
General style and font are great, it feels a bit more like a regular manual. You've included more info, which is neat. Hopefully you'll have to answer less questions on reddit/here/discord this way ;). I also prefer the new schematics of the airpaths, the 2D drawings (instead of the 3d-ish renders) makes it clearer. V1 looked more stylized, but imo 'as clear as possible' should be the main focus of any manual. The cooling/flavour/stemtemp indications are cool too. It examplifies the differences between all the options, making them feel less 'cant see forest through the trees'-ish.

Is it an idea to add any warranty info? Or at least the 'contact MH here or here if you run into issues' part? Might save you a few more PM's to answer.

About the new draw-resistance-control .. While I can't say for sure that I understand the new version just by reading the manual, I'm really positive that reading it again while holding one this september, will instantly make me go 'aaah, ok, so that's how that works, got it!'. So I think you're good there too.

Overall a great guide ^^
 

SirGanjaVapeAlot

Well-Known Member
Yeah we can sort that out, no problem 🙂 Please get in touch before placing an order.


We're almost finished with the updated manual for the Gen 2 ( Thanks @kel! :tup: )
What do you guys think? Is it easy enough to understand or way too much info? :D

Revolve Gen 2 Manual preview
Actually, I really like this manual. Without the glass stem, it was sometimes difficult to figure out exactly what settings I had the new stem on.

I like the scores given to each method so that the user can understand which mode will be best for their use. I only noticed one thing that jumped out in my eyes

The SCU and Alternative Sleeve options section I think, is putting a bit too much stock in the scoring system used to differentiate between the .modes

I would either use descriptive language instead of the numbers or provide some sort of explanation of the scale in use :) I don't really know what it means practically even as a regular user what the difference between 3.5 and 3.0. Honestly besides describing the effect the numbering in both sections can be removed and kept in the explanation of the airflow options.
 

OGablogian

AKA Probeer
The SCU and Alternative Sleeve options section I think, is putting a bit too much stock in the scoring system used to differentiate between the .modes

I would either use descriptive language instead of the numbers or provide some sort of explanation of the scale in use :) I don't really know what it means practically even as a regular user what the difference between 3.5 and 3.0. Honestly besides describing the effect the numbering in both sections can be removed and kept in the explanation of the airflow options.

Yeah, I think I agree with this as well. Providing those extra/alternate options with .5 modifiers kinda goes against the more 'this is an indication' vibe that the icons have (and imo should have). Though if you want to keep the neat icons in those sections as well, just remove the number in front of it. Only + or -, followed by the cooling/flavour/stemtemp icon.
 

SirGanjaVapeAlot

Well-Known Member
It would be cool if you offer a holy Trinity bundle with a discount for picking up all three items at once!

Be still my aching VAS

Also, just got a Mighty+ as part of a business deal and combined with the revolve @#&&#%$#&## rips. I haven't felt this stoned in a while. Massive amounts of vapor too
 
Last edited:
SirGanjaVapeAlot,
  • Haha
Reactions: TommyDee

havewill1

Well-Known Member
Been using my V1 since i pre ordered last December, I'm highly anticipating the new version and for the IH to get released
 
havewill1,
  • Like
Reactions: LAWTHEONE

Blacksad

Active Member
Anyone who also just leaves the reclaim screen stuck in the body, while soaking it in a tube of iso? Comes out clean, and stays in place fine, even after removing the helix.
Last time I took it out, put it in the tip and made few draws. I was pretty surprised to see so much vapour just coming from the screen. It wasn't very delicious, but it hit like a truck. Adding some herb to it can make a killer combo.

@Brenyo will the new screens fit the Revolve 1.0, especially with the glass body? Do you plan to accept pre-orders on glass body stems also? To my taste, glass body Revolve is much better than a Ti body Revolve. Although I can understand why some people prefer the Ti body, I would rather stick to the glass and save some money
 
Blacksad,
  • Like
Reactions: Petetbay

Brenyo

Well-Known Member
Manufacturer
will the new screens fit the Revolve 1.0, especially with the glass body?
No unfortunately, the new screens will only work with the gen2's legs at the end of the helix. It'll click into place so you can pull it out with the cooling unit.

Do you plan to accept pre-orders on glass body stems also?
Yes - the new ones will be 12mm diameter and hopefully have some extra grip as well
 

OGablogian

AKA Probeer
Last time I took it out, put it in the tip and made few draws. I was pretty surprised to see so much vapour just coming from the screen. It wasn't very delicious, but it hit like a truck. Adding some herb to it can make a killer combo.

Yeah I used to save them aswell. Throw 5 of the clogged ones in a bowl and you're off to space. Stopped because, like you said, the taste kinda sucks. Which, for me, confirms that using the reclaim screen makes my normal hits taste better. Since the bad tasting stuff stays stuck in the screen.
 
OGablogian,
Top Bottom