t-dub
Vapor Sloth
What video?
Discontinued Lily vaporizer by Triihouse
- Thread starter TriiKLe
- Start date
-
- Tags
- flame powered
vaporonly
living in a van down by the river
Tommy sent a youtube video to early testers but it was private and gone now
It showed an older version of lily
Tom Funk
Well-Known Member
The one from Tommy with the big-ass clouds. I have mentioned this before, perhaps on the Daisy thread. I haven't linked it because it was a video of a prototype (the only difference I think is inconsequential) and because I figured if Tommy wanted it released he would have put it up on the triihouse site himself.
Sorry to be a tease but just wanted to give evidence for the assertions I'm making.
1_gr8_underdog
Trapped in the Astral Planes Back from the dead
I couldn't take it any longer. Lily will be coming and in walnut to match her big sister. 
Check
Well-Known Member
There should be 2 carb holes, only the back should be used if at all. I too have the same mark on my lily as well. I actually have come to like it honestly.
basement farmer
My face is melting...
That second pic looks exactly like you described it...though a little out of focus. Like someone realized that drilling thru the knot wasn't going to work. Or more likely, it's just an artifact from the wood working process. Sometimes when you cut lumber, the saw will break off peices of the knot.
I'm inclined to think that it's NOT a bit cut because it's the opposite side of where the turbulator is shown in all of the product pictures.
Don't start.... ;-)
Vegas haze
but my momma said
The turbulator hole is above the screen and the carb hole is below it
Vegas haze
but my momma said
Lily or Daisy doesn't matter. The turbulator is meant to swirl the hot air coming in before it hits your load.
vaporonly
living in a van down by the river
in theory it doesn't matter but as not to confused people there isn't a hole lowering then the screen on the lily
Hello, Everybody.
Wow. Pretty much what I have to say about everything so far.
I owe everybody a chime.
First of all, if you have not received a Lily ( or a Daisy, if you ordered from us directly) your package will not ship for a couple more days.
We are so ever grateful for everybody's growing support and genuine interests.
Triihouse is an organic-living organism. The manner in which this organism grows is governed by me, my partner (whom will be introducing herself to the community soon)( I hope I used the word "whom" correctly), and by you guys here on the FC community including other world vaporists-of-the-like.
Like all living organisms Triihouse must adapt.
Lily is the sum of all the comments, feed-back (positive or negative), and down-right heartfelt feelings you guys have shared with me about Waldo and especially, Daisy; I take every single one personally and quite seriously in hopes that I do not over-look any details.
Daisy incubated in my care for 2 years before I released her to the public. 2 years!
That sorta gave me a little time to work out any kinks. I believe that incubation time to work out any issues was a major attribute to Daisy's success.
I consider myself the " Head Vampire " when it comes to my products. That means that I use my vaporizers more than anyone else. Being the HV also means that I critique my vaporizers more than anyone else. Where the art meets the science is that I must find that sweet spot where I can satisfy a diverse range of people with different tastes and requirements who will use Triihouse products on top of designing something that is aesthetically pleasing, functional, simple, durable, etc.
So, in short, I made a minute change to Lily and the outcome is a few days delay.
Though it is stressful, because I know everyone wants their merchandise as soon as possible, my excitement and enthusiasm for creating a better product far outweighs that stress.
If you have PAID for and received your Lily you will be receiving an updated version. We know who you are and we will contact you.
If you have paid for and are still waiting for your Lily, your package will be shipped out in a few days and you will be receiving a 10% refund from your order... automatically.
t-dub:
That is not an accidental drill hole on your Lily. steama mentioned it already and I will concur that what you see is the center knot. I thought you would like the novelty of having the first few years of that Walnut tree or branch because you were one of the firsts to order a Lily vaporizer. I will be contacting you directly.
Also, yes Triihouse operations are out of the state of Montana as of now. I am originally from California and my wife is from Montana. Her family is here and it was more affordable; we were starting a family and a business
, so it made sense.
Please feel free to contact me if you have any other questions or comments or post on the board if you feel it would benefit the community.
Thank you very much, everyone.
YES. Videos, media, and more content are on the way.
Wow. Pretty much what I have to say about everything so far.
I owe everybody a chime.
First of all, if you have not received a Lily ( or a Daisy, if you ordered from us directly) your package will not ship for a couple more days.
We are so ever grateful for everybody's growing support and genuine interests.
Triihouse is an organic-living organism. The manner in which this organism grows is governed by me, my partner (whom will be introducing herself to the community soon)( I hope I used the word "whom" correctly), and by you guys here on the FC community including other world vaporists-of-the-like.
Like all living organisms Triihouse must adapt.
Lily is the sum of all the comments, feed-back (positive or negative), and down-right heartfelt feelings you guys have shared with me about Waldo and especially, Daisy; I take every single one personally and quite seriously in hopes that I do not over-look any details.
Daisy incubated in my care for 2 years before I released her to the public. 2 years!
That sorta gave me a little time to work out any kinks. I believe that incubation time to work out any issues was a major attribute to Daisy's success.
I consider myself the " Head Vampire " when it comes to my products. That means that I use my vaporizers more than anyone else. Being the HV also means that I critique my vaporizers more than anyone else. Where the art meets the science is that I must find that sweet spot where I can satisfy a diverse range of people with different tastes and requirements who will use Triihouse products on top of designing something that is aesthetically pleasing, functional, simple, durable, etc.
So, in short, I made a minute change to Lily and the outcome is a few days delay.
Though it is stressful, because I know everyone wants their merchandise as soon as possible, my excitement and enthusiasm for creating a better product far outweighs that stress.
If you have PAID for and received your Lily you will be receiving an updated version. We know who you are and we will contact you.
If you have paid for and are still waiting for your Lily, your package will be shipped out in a few days and you will be receiving a 10% refund from your order... automatically.
t-dub:
That is not an accidental drill hole on your Lily. steama mentioned it already and I will concur that what you see is the center knot. I thought you would like the novelty of having the first few years of that Walnut tree or branch because you were one of the firsts to order a Lily vaporizer. I will be contacting you directly.
Also, yes Triihouse operations are out of the state of Montana as of now. I am originally from California and my wife is from Montana. Her family is here and it was more affordable; we were starting a family and a business
, so it made sense.Please feel free to contact me if you have any other questions or comments or post on the board if you feel it would benefit the community.
Thank you very much, everyone.
YES. Videos, media, and more content are on the way.
cybrguy
Putin is a War Criminal
We had a manufacturer in a northern state who was put though holy hell when his state closed his business and arrested him for possession and manufacturing paraphernalia. That was before my time here, but I read his thread.Also, yes Triihouse operations are out of the state of Montana as of now. I am originally from California and my wife is from Montana. Her family is here and it was more affordable; we were starting a family and a business
I hope you have your butt covered up there...
marduk
daydreamer
What is the minute change you made?
RUDE BOY
Space is the Place
We had a manufacturer in a northern state who was put though holy hell when his state closed his business and arrested him for possession and manufacturing paraphernalia. That was before my time here, but I read his thread.
I hope you have your butt covered up there...
i believe they are in a more forward thinking state with a sorta working Legal MMJ program.
cybrguy
Putin is a War Criminal
I was just reading about Montana's laws, and they don't seem so forward thinking to me. But whatever, I just hope Triihouse is protecting them selves. Montana is NOT Cal or CO, that is for sure. I don't want to see what happened to our member happen to anyone else.
1_gr8_underdog
Trapped in the Astral Planes Back from the dead
basement farmer
My face is melting...
Only the best to Tommy your special lady friend.
And personally, I don't care what state the vaporizor is made in so long as the "employees" are happy and I doubt that sweatshop labor is a problem in Billiings, MT.
Also, having read the rest of this thread and the vendor's website, best of luck to Tommy Le and family.
You make a kick-ass vaporizor my friend and if the Lily works half as good as my Daisy, I know I'll be a happy cusotmer.
As for videos, I'd like to see a short on the "making of a Daisy/ Lily". Kind of what we see on the Vapman site. Users have a certain connection to the tools that they use.
And personally, I don't care what state the vaporizor is made in so long as the "employees" are happy and I doubt that sweatshop labor is a problem in Billiings, MT.
Also, having read the rest of this thread and the vendor's website, best of luck to Tommy Le and family.
You make a kick-ass vaporizor my friend and if the Lily works half as good as my Daisy, I know I'll be a happy cusotmer.
As for videos, I'd like to see a short on the "making of a Daisy/ Lily". Kind of what we see on the Vapman site. Users have a certain connection to the tools that they use.
Last edited:
Thank you for the update @TriiKLe I have been loving my Daisy and can't wait to try out the Lily. I don't mind waiting a little bit. And the 10% refund is awesome. Thank you
Marvelous gesture, highly appreciated.
t-dub
Vapor Sloth
I await to hear from you.
Mister G
Deceptively Old Fart
So, in short, I made a minute change to Lily and the outcome is a few days delay.
Thank you for the update Tommy. Your Customer Service is really top notch and it really does make a difference to us customers and I can confidently say everyone in here wants to support Triihouse.
Is it possible for you to tell us what the change to Lily was? I know I'm not the only one who's curious.
