Liger banger V2.0
- Thread starter tepictoton
- Start date
jl420
Well-Known Member
Do you have a email address or phone number where Sam at Huffy Glass could be contacted? Thanx Baron23This is probably not what is expected under a topic Liger Banger, but I had been looking around for a dab station for my Liger and just didn't find what I wanted. Huffy Glass did seem to make something very similar to what I wanted, but everybody was out of stock on it.
So, I called Huffy Glass and they said "sure, be glad to make one for you". Well, if being made for me, then perhaps we can change is up a bit to which they replied "sure, whadaya want?"
Here it is below. Middle is cup for q-tips. There are three arms, one with an 18mm female (they will put on whatever you want), one arm has their normal dab tool cup, and the third I had made as very wide dab tool cup to accommodate the CCA 710 Storm Cap (and I bet you could be a lot of other caps in there also but probably not the new monster..... anybody have the diameter of the new cap?).
The piece was reasonably priced ($75), Huffy Glass was a complete pleasure to deal with (ask for Sam), and the piece is very well made and exactly what I wanted.
Baron23
Well-Known Member
@jl420 - here you go. If you call and order one, please tell them that Stephen sent you.
Phone Number: 812-330-4191
E-Mail: Voltaglassstudio@gmail.com
Address: 405 W. 6th Street Suite D-3 Bloomington Indiana 47404
PoopMachine
Well-Known Member
Preordered my V3 today... bring the pain!
alittledabwilldoya'
Sapphire Powered Dabstronaut.
Which bucket did you get?
ichibaneye
Vapriot, Traveler & Vaporizer/ing lover!
Solid. I was looking to do the same. I'm not seeing the info to do so anyplace on the website. Maybe I'm on the wrong website to begin with.
I just searched for it and selected the best result. I found the other versions but not the newest one yet to be introduced. I did notice a delay. I'm not worried about that as I hold major respect for and appreciate anyone not rushing to market a final product that's not totally buttoned up tight. I feel this will save us from any unforseen hassle or issues with the device in the future.
This will also be my first electronic concentrate dab set-up and first time using one (electronic/plug in). I'm so excited! From what I've been studying it's one of the best all around units when it comes to construction, ease of use, cleaning and performance. Please correct me if I'm wrong and any added input is also appreciated.
Also why go 16, 20 or 30mm? I must know! I also see advantages of a flat coil over a rounded for various reasons. For one, more contact area to better facilitate heat transfer and maintain it. Yes, no?
Maybe just maybe I missed where to find the pre-order link because I just opened my eyes and vaporized.
Yeah.... what a way to start the day!I'll be looking to you big brothers and sisters here for more guidance when I'm in the money so to speak. Thank you for your knowledge, advice in the past, present and looking forward to the future. Cheers!
Baron23
Well-Known Member
So I'm no expert...there are others here with much more experience.Solid. I was looking to do the same. I'm not seeing the info to do so anyplace on the website. Maybe I'm on the wrong website to begin with.
I just searched for it and selected the best result. I found the other versions but not the newest one yet to be introduced. I did notice a delay. I'm not worried about that as I hold major respect for and appreciate anyone not rushing to market a final product that's not totally buttoned up tight. I feel this will save us from any unforseen hassle or issues with the device in the future.
This will also be my first electronic concentrate dab set-up and first time using one (electronic/plug in). I'm so excited! From what I've been studying it's one of the best all around units when it comes to construction, ease of use, cleaning and performance. Please correct me if I'm wrong and any added input is also appreciated.
Also why go 16, 20 or 30mm? I must know! I also see advantages of a flat coil over a rounded for various reasons. For one, more contact area to better facilitate heat transfer and maintain it. Yes, no?
Maybe just maybe I missed where to find the pre-order link because I just opened my eyes and vaporized.
I'll be looking to you big brothers and sisters here for more guidance when I'm in the money so to speak. Thank you for your knowledge, advice in the past, present and looking forward to the future. Cheers!
BUT....:
1. why bigger dabbing surface? More suface area for boiling off the concentrate
2. So why not just go bigger at all times? Well, people are finding that they have to drive their coils pretty dang hard to get the dabbing surface of the 30mm up to sufficient temp. Do not confuse coil temp and dab surface temp. The more hdwr you have, the more hdwr to radiate heat outward and the more your coil will have to work.
3. Flat vs coil - I'm not at all sure that you really get a better coil/banger heat transfer from flat vs coiled. I don't think that has been found to be true with the 3.0 but @mrbonsai420 and other V 3.0 beta testers can tell you for sure.
Solid. I was looking to do the same. I'm not seeing the info to do so anyplace on the website. Maybe I'm on the wrong website to begin with.
I just searched for it and selected the best result. I found the other versions but not the newest one yet to be introduced. I did notice a delay. I'm not worried about that as I hold major respect for and appreciate anyone not rushing to market a final product that's not totally buttoned up tight. I feel this will save us from any unforseen hassle or issues with the device in the future.
This will also be my first electronic concentrate dab set-up and first time using one (electronic/plug in). I'm so excited! From what I've been studying it's one of the best all around units when it comes to construction, ease of use, cleaning and performance. Please correct me if I'm wrong and any added input is also appreciated.
Also why go 16, 20 or 30mm? I must know! I also see advantages of a flat coil over a rounded for various reasons. For one, more contact area to better facilitate heat transfer and maintain it. Yes, no?
Maybe just maybe I missed where to find the pre-order link because I just opened my eyes and vaporized.
I'll be looking to you big brothers and sisters here for more guidance when I'm in the money so to speak. Thank you for your knowledge, advice in the past, present and looking forward to the future. Cheers!
The heat transfer is actually slightly better on the barrel coil currently but the new washer should correct that and make the 30mm coil temps comparable, I will let you know as soon as they arrive. And yes, bigger area means the dab can spread out more and vaporize more efficiently. My dabs seem to only cover 20mm when melted anyway but some of my friends take bigger dabs cover the 30mm and the 30mm wins there with thicker vapor. The 30mm also handles smaller dabs well but I feel my sweet spot is the 20mm so far. I still use my 16mm V2 for travel. And I am looking for a Small, enail stable 10mm rig to try out these little 10mm Liger bodies that will go great with the 16mm version. So yeah, there is a need for each size, because different strokes for different folks!
Some people buy the Nail to match their coil, which I never understood since you can get coils for $30 and a good nail is 10x that. I just keep a few of all 3 size coils around for all occasions!
jl420
Well-Known Member
Thanx Stephen I just spoke to Sam and I did say it was due to you that I wanted to order a similar dab station.@jl420 - here you go. If you call and order one, please tell them that Stephen sent you.
Phone Number: 812-330-4191
E-Mail: Voltaglassstudio@gmail.com
Address: 405 W. 6th Street Suite D-3 Bloomington Indiana 47404
Baron23
Well-Known Member
hehehe...I don't get any commission or anything like that. I just liked these guys and wanted them to know I appreciated their work and was referring them.Thanx Stephen I just spoke to Sam and I did say it was due to you that I wanted to order a similar dab station.
Thanks!!
PoopMachine
Well-Known Member
alittledabwilldoya'
Sapphire Powered Dabstronaut.
The 30mm that uses the flat coil. Im a flat coil purist
Oh really ... then perhaps this will pique your interest:
ichibaneye
Vapriot, Traveler & Vaporizer/ing lover!
Oh really ... then perhaps this will pique your interest:
All 3 versions, someone's all in deep! I'm very jelly.
PoopMachine
Well-Known Member
I just went for the SIC. I cant believe sapphire is a big enough difference to spend the extra money. Maybe one day if I have a big windfall.
ccchase420
TheCCC420 YouTuber
worth noting that the finalized sapphire insert will be transparent like the quartz. personally holding out for that one.
hardboiledfrog
tinkerer
excellent analysis chase, induction heating would work much better for the Ligers.
http://fuckcombustion.com/threads/induction-heated-e-nail-with-arduino-closed-loop-temp-control.22605/
EVlL 55
Well-Known Member
..hello.
I was hoping someone can tell me if it would make much difference to flip the coils back right side up being as the surface of the insert is very much near the bottom of the bucket.
..I know the temp sensor is in the tip of the coil,..and we used to,..and still do turn them tip up,..that was to measure the heat directly under a domeless' dish,...but w/ the ligers build I wonder if it would give a better read flipped.
I was hoping someone can tell me if it would make much difference to flip the coils back right side up being as the surface of the insert is very much near the bottom of the bucket.
..I know the temp sensor is in the tip of the coil,..and we used to,..and still do turn them tip up,..that was to measure the heat directly under a domeless' dish,...but w/ the ligers build I wonder if it would give a better read flipped.
ccchase420
TheCCC420 YouTuber
This is probably not what is expected under a topic Liger Banger, but I had been looking around for a dab station for my Liger and just didn't find what I wanted. Huffy Glass did seem to make something very similar to what I wanted, but everybody was out of stock on it.
So, I called Huffy Glass and they said "sure, be glad to make one for you". Well, if being made for me, then perhaps we can change is up a bit to which they replied "sure, whadaya want?"
Here it is below. Middle is cup for q-tips. There are three arms, one with an 18mm female (they will put on whatever you want), one arm has their normal dab tool cup, and the third I had made as very wide dab tool cup to accommodate the CCA 710 Storm Cap (and I bet you could be a lot of other caps in there also but probably not the new monster..... anybody have the diameter of the new cap?).
The piece was reasonably priced ($75), Huffy Glass was a complete pleasure to deal with (ask for Sam), and the piece is very well made and exactly what I wanted.
OK guys, 30mm flat coil update. A simple washer under the flat coil and "stretching" out the coil a bit has snugged the coil against the bucket nicely and I can now run the V3 30mm flat coil in the 650-675 range quite nicely. So the final V3 in all sizes will run in normal temp ranges in case that was a worry for some of you.
Last edited:
Gonzo_da_wind
Well-Known Member
... Ill just send Josh a signed blank check.He can fill in however much he wants for 20mm liger with saphire insert.....
Last edited:
Gonzo_da_wind
Well-Known Member
Which inserts were you using?
Monsoon
Well-Known Member
That looks awesome and a great price for a custom! I might order one myself since I've been nail swapping more now. Might be a good accessory for Josh to sell as well as an accessory and he could order them to spec.This is probably not what is expected under a topic Liger Banger, but I had been looking around for a dab station for my Liger and just didn't find what I wanted. Huffy Glass did seem to make something very similar to what I wanted, but everybody was out of stock on it.
So, I called Huffy Glass and they said "sure, be glad to make one for you". Well, if being made for me, then perhaps we can change is up a bit to which they replied "sure, whadaya want?"
Here it is below. Middle is cup for q-tips. There are three arms, one with an 18mm female (they will put on whatever you want), one arm has their normal dab tool cup, and the third I had made as very wide dab tool cup to accommodate the CCA 710 Storm Cap (and I bet you could be a lot of other caps in there also but probably not the new monster..... anybody have the diameter of the new cap?).
The piece was reasonably priced ($75), Huffy Glass was a complete pleasure to deal with (ask for Sam), and the piece is very well made and exactly what I wanted.
I see a bunch of people placing pre-orders for the V3, is there a link for it somewhere? I'm mostly curious about the pricing to see if I can work it into my budget to try it out.
Baron23
Well-Known Member
Thanks...glad you like it. If you do get one, ask for Sam and, if you don't mind, tell them that Stephen sent you. I don't get anything out of it but I would like them to know that their efforts working with me on this is paying dividends.
Yes, I think Josh should offer or post a link to them on his site but he's a one man show and that just might be adding too much on him as he works mightily to get the v3.0 out the door.
Yeah, I don't see a pre-order link on his website...not sure how folks are pre-ordering 3.0's. I just got my 2.0 not too long back and I'm happy as a clam for now.
Cheers
SiC and Quartz. I was running the 30mm SiC at 650-670 and the quartz and 700 now with the washer in place. I can go really low with the encased 20mm and sapphire (575)
PoopMachine
Well-Known Member
Send him an email and he'll send you a Paypal invoice for the 3.0. He said he hopes to ship the 3.0 in Oct.