JCVAP "Pockety"

Timps27

Timps27

Feel like I’m winnin’ when I’m losin’ again
The oculus is junk; I would not recommend it. The best experience I’ve found for the Proxy is the ball cap with a Kovac’s glass spinner core:

www.kovacsglass.com

Proxy Spinner Core

The original Spinner Core insert for the Puffco Proxy. Fits the 'Ball Cap' tether only. The unbeatable function of the Kovacs Caps is now...
www.kovacsglass.com
 
biohacker

biohacker

H.R.E.A.M
Timps27 said:
The oculus is junk; I would not recommend it. The best experience I’ve found for the Proxy is the ball cap with a Kovac’s glass spinner core:

www.kovacsglass.com

Proxy Spinner Core

The original Spinner Core insert for the Puffco Proxy. Fits the 'Ball Cap' tether only. The unbeatable function of the Kovacs Caps is now...
www.kovacsglass.com
Click to expand...

How well does it work without a pearl? And does it leave some leftover like the proxy oculus or does it vape it up all pretty much dry?

My favourite cap to date is the new puffco Joystick but they aren't for sale on their own yet.
 
Timps27

Timps27

Feel like I’m winnin’ when I’m losin’ again
I really like the Kovacs piece, I have the JCVap AlN chamber and also an OTP cap. I always use a pearl so can’t comment on how it works sans ruby, but it’s half the price of the OTP and a better experience IMO. The OTP is too open, the Oculus is way to restrictive, the spinner cores find a nice balance and pump out some great clouds.
 
M

Misterhyde

Well-Known Member
I might have to get one of those spinner cores for my pockety if they actually work nice. I have been hoping for a good hands free hit. It gets a little annoying when reclaim gets on the ball cap and it doesn't move as well.
 
2tiki

2tiki

Well-Known Member
Well, it seems that my pockety maybe toast. :(

Since about 50 "puffs" into having it, the current temp displayed would often be over 800 after I finish a sesh at around 500. But It was always normal when I turned it on. Not any more. Now it is showing a high temp bouncing around between 500-800 or so as soon as I turn it on. Even after turning the unit off and on again a few times, and fully cleaning all parts of the unit and the oven, It is still doing it. I guess it is time to reach out to the company. The counter only has 100 "puffs" showing. I can't imagine it's just that I haven't cleaned the contacts well enough.
 
S

someguy

Active Member
I have the kovacs spinner core in the peak pro ballcap rubber and it works great with a 4mm ruby, the stock peak pro ball cap works well also.
Warning! Do not use the spinner core in the stock pockety rubber cap, you will crack your ceramic spacer trying to jam it on! :bang:

I did get the bottomless banger, but I haven't got it to work yet. I think it might be because it sits too low in the BB. I tried with and without the stock air hole blocked. Maybe it could work with a long "snout" carb cap?


https://imgur.com/JTVXi0G
JTVXi0G.jpg
 
Timps27

Timps27

Feel like I’m winnin’ when I’m losin’ again
someguy said:
Warning! Do not use the spinner core in the stock pockety rubber cap, you will crack your ceramic spacer trying to jam it on! :bang:
Click to expand...

Did you try the Peak spinner or the Proxy spinner? Kovacs makes one of each, and the Proxy is smaller. I don’t have a Pockety to check compatibility, but if the Peak spinner was too big the Proxy spinner may fit?
 
2tiki

2tiki

Well-Known Member
I cleaned the glass piece in the stock cap (with iso), and after rinsing and drying it off, I put a tiny drop of veg oil on the glass piece, and spread it around with my finger. Popped it back into the silicone cap, and now it rotates like a dream!

I may not even bother getting another cap now. Without it constantly sticking to the silicone, now the lid stays attached to the pockety and doesn't feel so fiddly. I also made my own tether.
 
S

someguy

Active Member
Timps27 said:
Did you try the Peak spinner or the Proxy spinner? Kovacs makes one of each, and the Proxy is smaller. I don’t have a Pockety to check compatibility, but if the Peak spinner was too big the Proxy spinner may fit?
Click to expand...
That was with a spinner intended for the Peak. I fixed it by using the peak ball cap rubber with the spinner instead.
I am also having connection problems with my atomizer, it seems to be a known issue with JCVAP atomizers.
 
JCVAP

JCVAP

Active Member
Manufacturer
Lighthanded said:
New recycler glass for the pockety is up on Jcvap for preorder. Pictured with an auto spinner oculus type cap.
Click to expand...
jcvap.com

JCVAP New Glass Turbo Spinner Cap for Peak Pro and JCVAP Chambers - JCVAP®|Official Store

JCVAP spinner cap use multi-channel spiral tubes to generate uniform eddies and push the material towards the heating walls of JCVAP or Peak pro chambers. It further enhances the flavor when combined with terp pearls and free your hands. When this item used for peak pro and Luxo,the rubber tap...
jcvap.com jcvap.com
 
2tiki

2tiki

Well-Known Member
vpuser said:
jcvap.com

JCVAP New Glass Turbo Spinner Cap for Peak Pro and JCVAP Chambers - JCVAP®|Official Store

JCVAP spinner cap use multi-channel spiral tubes to generate uniform eddies and push the material towards the heating walls of JCVAP or Peak pro chambers. It further enhances the flavor when combined with terp pearls and free your hands. When this item used for peak pro and Luxo,the rubber tap...
jcvap.com jcvap.com
Click to expand...
They are probably still to new, but has anyone here tried the JCVAP spinner cap yet? If so, does it work as well or better than the default manual spin cap?
 
J

Joshtownsend

Well-Known Member
Do you guys think it might work with a 3dxl? Do they work with the regular puffco 3d atomizer?
 
Joshtownsend,
B

Bababouy

Well-Known Member
From my understanding it should, the 3DXL is supposed to take peak pro caps and grommets
 
Bababouy,
S

someguy

Active Member
Joshtownsend said:
Do you guys think it might work with a 3dxl? Do they work with the regular puffco 3d atomizer?
Click to expand...
I was wondering the same thing. I have seen mention of a special xl temperature setting on the peak pro, so there might be differences in how it works but I have no real idea one way or the other.
But if the pockety chamber is the same as their peak pro compatible chamber, I would imagine it would work on some level, you might not get accurate temp control though. I'm tempted to get one and try it
 
biohacker

biohacker

H.R.E.A.M
someguy said:
I have seen mention of a special xl temperature setting on the peak pro, so there might be differences in how it works but I have no real idea one way or the other.
Click to expand...

You need the app for it (and latest AG firmware) if you want to enjoy the XL intensity level. Not sure why you guys would want to fuck with an atty that isn't designed for it that's worth almost as much as the device lol.
 
MonkeyTime

MonkeyTime

Well-Known Member
biohacker said:
You need the app for it (and latest AG firmware) if you want to enjoy the XL intensity level. Not sure why you guys would want to fuck with an atty that isn't designed for it that's worth almost as much as the device lol.
Click to expand...
I think you're saying you're taking your good stuff and using it on lower grade equipment? Based on price?

I have a Daab and now two Pockety's, tried the SiC bucket tonight, clouds and flavor, loving all three and trying to learn their differences. But this is all a different price level than Pro stuff, I get it.

Or, testing has me a little off and I didn't follow your direction :science:

Could they want to use a specific addy on a smaller base unit?
 
MonkeyTime,
  • Like
Reactions: JCVAP
S

someguy

Active Member
biohacker said:
You need the app for it (and latest AG firmware) if you want to enjoy the XL intensity level. Not sure why you guys would want to fuck with an atty that isn't designed for it that's worth almost as much as the device loli
Click to expand...
I like to tinker with my gadgets
 
You must log in or register to reply here.
Top Bottom