Herborizer corner

pxl_jockey

Just a dude
Thanks! Yeah that is one long-ass injector :)
If you can produce an 18/14 injector bowl that‘s got less vertical height and works with these 18mm injectors, I’m here for it. I honestly don’t think the herborizer bowl needs that much distance to the screen, I’d like a little less and be able to just reduce the temperature a bit. But that’s just me.
 

Haze Mister

Verdant Bloomer
Manufacturer
If you can produce an 18/14 injector bowl that‘s got less vertical height and works with these 18mm injectors, I’m here for it. I honestly don’t think the herborizer bowl needs that much distance to the screen, I’d like a little less and be able to just reduce the temperature a bit. But that’s just me.
When I look at this video that Abele posted
the herb is pretty damn close to the heater nozzle so if the bowl was any shorter it would be a problem.
 
Haze Mister,
  • Like
Reactions: BigJr48

pxl_jockey

Just a dude
Herbo can work well with just enough ammount to cover the ss screen
This is my use case, around .1g - or a bit less. It tends to go like one big hit, shake the bowl and then a clean-up hit. I also prefer the regular bowl to the microcode bowl, even though I use microdose-to-smallish amounts. That wide surface area works well with a variety of loads, I guess.
 

Vapordeflor

Well-Known Member
Indeed it can rise tolerance but it all depends on the ammount you load and the times you RE load :lol: To avoid overwhelming highs (what is that?) and rise of tolerance, you can also space your sessions hit by hit. Long live pure convection. I got a 18mm glass stopper from "Stony lab", lab glass brand on amazon so in between hits I can cap the bowl for better conservation of herb.
 

namasteIII

Well-Known Member
Hello

I’ve been tickling lately with the idea of acquiring a Herborizer. I must admit the idea is quite dreamy as the device has been a long time coveted for me.

I come with a question regarding my possible peculiar use case and the suitability of the Herborizer, and its accessories for me and my use.

In most cases I would prefer to use the device to get big hard hitting hits,
on small amounts of material. I have a low tolerance, and most of the time don’t really enjoy or seek to have extreme effects.

My worry is the ability of the Herborizer to give satisfying hits on small amounts. Every vape I own and have used gives far less satisfactory hits with small amount. The degree of quality of the hits depend on the device, but the lack of fullness in the hit, and the obvious shift in quality and satisfaction feeling is very noticeable.

I’m much less a scientist than many of you, but I believe a large part of this dissatisfactory feeling is due to the change in air to herb ratio. The hits simply become less vaporus, and more airy.

Looking at the Herborizer bowl I think this feeling I am trying to avoid would happen with a small amount of herbs. Unless the heater is powerful enough to overcompensate.

Based on logic, my experience, as well as my reserch (I have read most of this thread) I believe the outcome I fear is more likely to be the truth.

I have watched many videos, and the largest fullest hits seem to be with largely packed bowls.

I did not say above but I am not looking for magic. I only want 1 hit out of my small bowls. I just want it to be a satisfying hit, not an airy, lesser than experience.

I don’t want to do large packs and hit over time, as that time spam might be days which degrades experience.

There are the two microdose options offered by Herborizer. I am wondering what the contemporary opinion on them is.



Based on my research most users seemed to prefer the standard bowl for a microdose.

I think the small microdose bowl was unliked with the glass plug, and then mostly liked modded with a standard screen instead. However It never seemed wildly popular and I am unsure on that configuration compared to the standard bowl for microdoses.

Then there was the reducer setup which the desgin seemed to have been praised, but there really wasn’t enough info for me to draw any sort of conclusion on its performance.

To me both designs look like they attempt to improve microdose performance but also seem to add a layer of clunk compared to the elegance of the standard bowl setup.

I do play with the idea of buying both to test for myself, however they, and everything in the Herborizer store are very expensive so I would love to limit extra costs.

To conclude…

I very much like the Herborizer and it speaks to me. I am a low tolerance user who wants a full experience satisfying hit on a small amount of material which will be spent in one hit.

my questions are:

How is the experience of the Herborizer with small amounts of material? Especially in regards to the satisfaction of a hit on a small load compared to a regular or large one?

How are the 2 microdose options offed by Herborizer?

How do they compare to just using a small amount in the standard bowl?

Thank you very much, it has been informative and entertaining to read this thread the past few days.
 

Vapordeflor

Well-Known Member
Hey @namasteIII

In my experience it does work pretty much the same way if you just cover the screen (0.06gr aprox) vs the normal amount I load which is 0.2gr, just enough herb to reach the lower section of the bowl handle. Difference between these two methods is basically number of hits per bowl (4 max when loading 0.2gr, 2 max loading 0.06gr) and also length of your first draw or length of pre heat (which I like to keep at 15 sec max). You can produce same amount of vapor with a shorter draw and pre heat period when loading 0.2gr.
Video shows 0.06 gr of herb (just enough to cover the screen) with the standard bowl, PID at 420C and15 sec pre heat. Possible to squeeze another hit from that bowl.
Ref micrfodose options I have never needed them so can´t help with that..

 
Last edited:

shadoo

New Member
@Mustang the color is the usual titanium oxide.
The protective layer, unlike copper..

The best is to fix it right away, with an high burn off, for couple minutes (500C - 1000F, 10 dial if you got TI).

It will take purple/grey nuances.
 

André80

New Member
hi, today the herborizer digiti arrived, but I can't find the manuals to make the temperature control work, I don't know how it works and the temperature is unstable
I think I have a new versiondont grave this manual


 
André80,

André80

New Member
come hai impostato i menu del controller? ho pid

p 006
io 007
d 001

la temperatura non è stabile, scende e sale rapidamente anche di 40°C

ammette che è una grande delusione aver speso quasi 600 euro e dopo aver atteso una settimana, ricevere l'erborizzatore difettoso
 
Last edited:
André80,

Vapordeflor

Well-Known Member
Hey @André80

Sounds bad to me, will write Sebastien/ store where purchased a mail right away explainig situation. I have had my PID working stable out of the box for 5 years now with nearly daily use...
Must mention I have never fckd aroud with PID settings, few pages back in this thread you can find the only manual page that came with my Herbo.

I will leave this here (bad quality and wrinkled paper I know..)


ibb.co

ibb.co

https://ibb.co/QnbjkXM


ibb.co

https://ibb.co/zZqJwzP

ibb.co

https://ibb.co/R2b8g9v

ibb.co

ibb.co


DETAILS OF PARAMETERS:

Inty: range (r): table 1 factory value (fv): 4
ouitY: r: 0 . 1 . 2 . 3 . 4 Fv: 2
HY: r: 0-99999 Fv: 003
PSb: r: -1000-1000 Fv: 0
rd: r: 0:heat;1:cool. Fv: 0
 
Vapordeflor,
  • Like
Reactions: vaporcman

André80

New Member
thank you, I read all the pages, it was precisely with that post that my doubts arose and I went to check the settings which are different

I wrote to SEb, tomorrow he will send me the new injector and controller waiting for me to return mine
 

martatabs

Member
Hello Everyone,

Sorry If someone has asked the same question but here it goes:
I have the Herborizer XL Bubbler. The bowl is pretty large as you know and the body itself is not very small. I am considering getting a Ti for the smaller bowl but I am readying comments that you could potentially combust with it. I am wondering if I buy smaller bubbler for the XL system, would it result in smaller hits with less quantity vaporized or the vapor will just be more potent. I know the smart decision is to get a smaller bowl but I have not been able to find one that suits the XL injector so I would take advise on that too.

Thank you and peace !
 
martatabs,
  • Like
Reactions: PPN

André80

New Member
I washed the glass of the head and the stand each day, but still sticking sometimes. Don't let also the head warming too much time on the stand.
That's one of the reason I get a flowerpot. Ti is nice, but too fragile and not conveniant. I don't understand they did nothing about that. Newvape found the way with the injector head for the stand but also for the bowl (there is a little bit gap).

sticks if grafts are moist, press too hard
 
André80,

PPN

Volute of Vapor
Hello Everyone,

Sorry If someone has asked the same question but here it goes:
I have the Herborizer XL Bubbler. The bowl is pretty large as you know and the body itself is not very small. I am considering getting a Ti for the smaller bowl but I am readying comments that you could potentially combust with it. I am wondering if I buy smaller bubbler for the XL system, would it result in smaller hits with less quantity vaporized or the vapor will just be more potent. I know the smart decision is to get a smaller bowl but I have not been able to find one that suits the XL injector so I would take advise on that too.

Thank you and peace !
No a smaller bubbler will not change the size of the bowl although I remenber a trick to vape smaller dose: it consists to place a screen just above the 4 bumpers where the screen is initially stucked below, this is place the load 5mm closer of the heater and permits you to cut the dose by half, I think this trick increase the temp by 10°C. Although I like to use the XL for its F*** big bowl, so much flowers means so much terpènes, a so intense flavour and deep relief!
 
PPN,

bankruptcy

Well-Known Member
Hi guys,
i'm finally getting a Ti. I'd like to use it with a power supply that i already own, it appears to be the same as them but without their branding, 12V 5A, with a standard DC barrel connection (5.5, 2.1 center positive). Can someone confirm that it would be compatible? thank! cant wait to get this setup.
 
Top Bottom