I don't have the original stand but i made a simple one in wood..never grip. Don t burn the wood but i made it large and don't let it on all day.
Herborizer corner
- Thread starter marcuss
- Start date
Vapster707
Well-Known Member
Anyone if tha company runs any holiday specials or has a coupon code ???
I tried ordering from puff it up using a coupon code but it wouldn't work ...
I tried ordering from puff it up using a coupon code but it wouldn't work ...
stickstones
Vapor concierge
It doesn't work on everything. I've only seen a discount on the Herborizer once, and it was something like 5%. I wouldn't hold out looking for a sale...
shopdognyc
Well-Known Member
@Vapster707 there are some makers brands that just don't the discount thing. Sometimes @PuffItUp or @VGOODIEZ do discounts.
justcametomind
Well-Known Member
How much is it for shipping? To the US?The lacentralevapeur prices have gone up as the FC discount code has ended and their shipping has increased considerably too unfortunately
shopdognyc
Well-Known Member
You can just go to the Herborizer website and price out an order.
Zangano Cruel
IG zan.cru (code) zancru (5% NV checkout discount)
Back
To
Back
To
Back
606F a la Glass Symphony.
To
Back
To
Back
606F a la Glass Symphony.
Vapordeflor
Well-Known Member
Amazing experiment!!
How is the flavor? Does it mantain as in the original design? It´s worth it to do the mod?
Thanks in advance Zantifa!!
Zangano Cruel
IG zan.cru (code) zancru (5% NV checkout discount)
To be truthful, I’ve arrived to the conclusion, that balls, are so so combined with a metal or ceramic heater.Amazing experiment!!
How is the flavor? Does it mantain as in the original design? It´s worth it to do the mod?
Thanks in advance Zantifa!!
If I needed to buy balls, I wouldn’t do it, I did the balls mod because I have extra g43 balls.
They tend to work too hot, overwhelming, kind of overheating the flavors.
Herb charrs easier as well.
Reminds me of a way more powerful g-43.
G-43 tends to hotspot or overheat flavors as well, and I can certainly taste the hot SS wire.
There’s no doubt that the Glass Symphony still has the edge over all these balls styled vaporizers by a far advantage.
Glass Symphony heater is all glass encapsulated
heater, plus balls.
And it doesn’t totally override flavors, and I can’t taste anything metallic.
Herborizer best native modification so far for me, has been the lowering down of the Ti heater rod by 9-10mm.
At 666F will give you heavy thick tasty vapor, no overwhelming nor hot. Just as it’s supposed to be the native Herborizer signature.
Back to Back again.
Just for fun
Herborizer U joint SH topped WE
Stay vaped.
Mantente de la mente!!!
Post in thread 'Glass and Milkshot Video Thread'
https://fuckcombustion.com/threads/glass-and-milkshot-video-thread.7443/post-1528005
Zangano Cruel
IG zan.cru (code) zancru (5% NV checkout discount)
Back to native Ti heater rod Herborizer 
pulled down mod.
Back to 666F.
No more charring, no more hotspots.
Back to very open airflow, and no more sticking to the bowl or stand.
No more overwhelming nor overheated vapors.
Sometimes things are better the way they were made.
If it’s not broken, don’t fix it.
Do not try to make the tires rounder.
All this “Balls Mania” a la “g43”,
cackled by all these influencers and new shillfluencers.
(wonder if they might be planning on putting balls in that “newly designed in China “elegant DynaCrap old school hand wooden Sherlock pipe
)
-it was “a LA Glass Symphony before”
and before that, someone else did it before too,
I remember using beads/glass marbles on my one hole chugger of a downstem DIY vodka beaker bong, It was a tight noisy annoying pull, circa 2010,
because I saw other people using that with smoking rigs, and before them they were others,
and that people knock it off from someone else, and so and so, all coming to physics and thermodynamics and aerodynamics, and some guys that studied, and named Venturi and vortexing (not to confuse with the other shillfluencer)
Playing with balls
They can turn blue
Native Herborizer is what I do
Zancru’s de la mente haiku
Stay vaped!
Mantente de la mente!!!
pulled down mod.Back to 666F.
No more charring, no more hotspots.
Back to very open airflow, and no more sticking to the bowl or stand.
No more overwhelming nor overheated vapors.
Sometimes things are better the way they were made.
If it’s not broken, don’t fix it.
Do not try to make the tires rounder.
All this “Balls Mania” a la “g43”,
cackled by all these influencers and new shillfluencers.
(wonder if they might be planning on putting balls in that “newly designed in China “elegant DynaCrap old school hand wooden Sherlock pipe
)-it was “a LA Glass Symphony before”
and before that, someone else did it before too,
I remember using beads/glass marbles on my one hole chugger of a downstem DIY vodka beaker bong, It was a tight noisy annoying pull, circa 2010,
because I saw other people using that with smoking rigs, and before them they were others,
and that people knock it off from someone else, and so and so, all coming to physics and thermodynamics and aerodynamics, and some guys that studied, and named Venturi and vortexing (not to confuse with the other shillfluencer)
Playing with balls
They can turn blue
Native Herborizer is what I do
Zancru’s de la mente haiku
Stay vaped!
Mantente de la mente!!!
Zangano Cruel
IG zan.cru (code) zancru (5% NV checkout discount)
Stay vaped!
Mantente de la mente!!!
Mantente de la mente!!!
justcametomind
Well-Known Member
For those who find their heating element cover binding with the heater stand:
verdampftnochmal.de
IIRC also MFLB used to ship their glass pieces and accessories with some silicon paste in a little tube.
Verdamper grease for glass grindings
Grease for gridings on glass waterpipes and glass adapters.
The Chemist
New member but long time lurker
I don't know if it's a good idea to use this on the Herbo. Since the heater is right next to the glass joint I wonder if the grease will either melt and end up at the bottom of the stand or if it will get cooked on the glass and be a pain to clean. On the Verdamper the glass connection is far from the heater and will only get hot when you draw so heat will not be a problem for the grease. In the end the glass will stick if it's dirty or if the glass expand because of the heat. It's easy to clean the glass but I don't think you can do a lot if the glass get stuck because of expansion, maybe change the glass piece on the stand or the injector to get a piece to won't stick, but since every piece of glass is always a little bit different in size there's no guarantee that it will solve the problem. So my question is does anybody had problems with using glass grease on the injector of the Herbo or am I overthinking things again?For those who find their heating element cover binding with the heater stand:
IIRC also MFLB used to ship their glass pieces and accessories with some silicon paste in a little tube.Verdamper grease for glass grindings
Grease for gridings on glass waterpipes and glass adapters.
Zangano Cruel
IG zan.cru (code) zancru (5% NV checkout discount)
I’ve used lip balm ointments, joint grease, Vaseline.
They all work fine.
But with certain flavors, I can taste smell the flavor in my vapors.
You’re definitely vaping those oils, they’re in the vapor path.
I stopped using them, it tends to get dirty, smelly, a little messy.
Ymmv.
Herborizer sticking injector/stand might be one of the few cons this vaporizer has.
Stay vaped!
Mantente de la mente!!!
They all work fine.
But with certain flavors, I can taste smell the flavor in my vapors.
You’re definitely vaping those oils, they’re in the vapor path.
I stopped using them, it tends to get dirty, smelly, a little messy.
Ymmv.
Herborizer sticking injector/stand might be one of the few cons this vaporizer has.
Stay vaped!
Mantente de la mente!!!
chary-ka
Well-Known Member
I've lurked here and other forums, and have asked some questions to respected members of the community and I finally pulled the trigger and bought a Herborizer Ti a couple days ago. I bought the bubbler package and bought the sherlock as well. Now comes the patience game of waiting for it to be shipped to the States.
Shadooz
Well-Known Member
got my new glass, (hope it's not GAS,) the 26th.. thanks santa and his little chinese elves 
14mm, maybe half chamber volume of my 5 years old generic 18mm matrixx.
both cost me 20 bucks.
right after the honey moon, it's just tastier.
but why ? less volume, less airflow, new..?
the only cons could be :
-the low airflow, for some,
-thinner, lack of a strong basis like the sturdy matrix.
-u can't let the heater in if u don't hold it. but i never do that anyway.
it still can be held with finger on the bowl to avoid the glass friction. i will only put keck clip for friends..
one thing with this one, it's the small hole to inhale, it does a straight line.
i always use my connoiseur tip, to put my tongue up and let the vap pass below.
here i can play with the focus pressure... maybe one factor that give more taste.
so for now it seems to become my main.
14mm snakes for stretch siping,
18mm matrix for one-hit, which i rarely do.
i always end a bowl with a 5/5 (TI preheat/setting after) and some morning i start with 4/4. and that gave me 2 strong tablespoon of abv, tasty with toasted cheese
"fromage a raclette" , +5h stoned...
14mm, maybe half chamber volume of my 5 years old generic 18mm matrixx.
both cost me 20 bucks.
right after the honey moon, it's just tastier.
but why ? less volume, less airflow, new..?
the only cons could be :
-the low airflow, for some,
-thinner, lack of a strong basis like the sturdy matrix.
-u can't let the heater in if u don't hold it. but i never do that anyway.
it still can be held with finger on the bowl to avoid the glass friction. i will only put keck clip for friends..
one thing with this one, it's the small hole to inhale, it does a straight line.
i always use my connoiseur tip, to put my tongue up and let the vap pass below.
here i can play with the focus pressure... maybe one factor that give more taste.
so for now it seems to become my main.
14mm snakes for stretch siping,
18mm matrix for one-hit, which i rarely do.
i always end a bowl with a 5/5 (TI preheat/setting after) and some morning i start with 4/4. and that gave me 2 strong tablespoon of abv, tasty with toasted cheese
"fromage a raclette" , +5h stoned...
vaping herbs
Well-Known Member
Hello dear community,
I would like to buy a new solid vaporizer soon.
I own a volcano but the vapor is too dry for me and I find the system with the balloon annoying. Always get a bad cough from the balloon so vaporizing is not fun.
You have a choice between the Sublimator, FlowerPot and Herborizer.
Which of the three would you buy and what is the reason?
I would like to buy a new solid vaporizer soon.
I own a volcano but the vapor is too dry for me and I find the system with the balloon annoying. Always get a bad cough from the balloon so vaporizing is not fun.
You have a choice between the Sublimator, FlowerPot and Herborizer.
Which of the three would you buy and what is the reason?
Shadooz
Well-Known Member
Sublimator is overpriced and not really available.
Flowerpot if u are US and use concentrate
Herborizer if u prefer flower and/or u are in EU
Edit: localisation will only increase the delivery time but take it from an us store for FP (like vgoodiez) or an EU store (like lacentralevapeur.com) for the herbo
Flowerpot if u are US and use concentrate
Herborizer if u prefer flower and/or u are in EU
Edit: localisation will only increase the delivery time but take it from an us store for FP (like vgoodiez) or an EU store (like lacentralevapeur.com) for the herbo
Last edited:
justcametomind
Well-Known Member
If there is a vape that shines for smoothness of its vapor I'd go with the VapBong, lower your temp on the Volcano on the time being and get it notified for 4/20 sales or B wares if you want it cheaper. Both discounts should be -30%, B wares may be forthcoming since new stock is being produced just now.
Open a thread on "Ask FC" to have more opinions.
Herbo or FP imho are pretty much the same. I don't own a Sub unfortunately.
Last edited:
I strongly expect though, surely, that this grease is intended for joints other than the actual external of the heating element.For those who find their heating element cover binding with the heater stand:
IIRC also MFLB used to ship their glass pieces and accessories with some silicon paste in a little tube.Verdamper grease for glass grindings
Grease for gridings on glass waterpipes and glass adapters.
Im absolutely sure of it. The Verdamper heater, in my 6 years of ownership, never stuck. It glides in and out. The stand, or as I had myself, a China bowl, doesn't cause the heating element to stick ever.
This grease is for two areas of the Verdamper glass- crucially, where the downpipe slots into the water piece at the top.
That DID stick.
And for where the glass mouthpiece inserts if desired, but that didn't stick as far as I recall.
I actually used selotape, around the outside rim of the downpipe, and mouthpiece inserts. But out of the vapor path, never heated. It worked fine.
Using grease on the outside of the Ti heater glass housing still leaves the same issue- grease on the inside of the bowl, then herb dust and crumbs, onnthe actual heater, burning in bowl and stand.
It ain't an easy thing to remedy. I think it's largely the straightness of the ti heater and glass, along with Sebastien's precision glass joints. No irregularities, just a perfect fit.
Sometimes perfect has it's drawbacks.
"It's got to be-ee-ee-ee-ee....Herborizer".