Herborizer corner

Shadooz

Well-Known Member
I expect 600 would not break a unit, but who can be sure.
The Titanium will have no issue, it would only be a PID/PSU failure, and so warranty involve. Cause they must follow that low "wattage"

Can someone here could give me the digiti output power written, for my curiosity ?

I as initially experimenting with the totally flawed design of a Glass concentrate bowl, hence needing 500 Celsius, and it still didn’t work
Glass have lower conduction. I wait to see how high the temp people will use the Inverzion, which is still in progress...
Its 450F coil temp still let me perplex..
But if u got metal allergies, it must be a top choice
 

Alexis

Well-Known Member
The Titanium will have no issue, it would only be a PID/PSU failure, and so warranty involve. Cause they must follow that low "wattage"

Can someone here could give me the digiti output power written, for my curiosity ?


Glass have lower conduction. I wait to see how high the temp people will use the Inverzion, which is still in progress...
Its 450F coil temp still let me perplex..
But if u got metal allergies, it must be a top choice
I think it’s 72 watts. Even if I bust my unit at 600, or even above, no way would good old Seb refuse to mend it for me, going by long experience.

The concentrate bowl is just flawed totally by design. It just doesn’t work. Seb effectively invented one of the least efficient ways to try and vaporize rosin.

The air can never flow through the Rosin and the conduction isn’t sufficient either.
 
Alexis,

Shadooz

Well-Known Member
I think it’s 72 watts.

So 22 more than the TI, faster heat up time

The concentrate bowl is just flawed totally by design. It just doesn’t work. Seb effectively invented one of the least efficient ways to try and vaporize rosin.

As dabbing is easier, faster than cooking herbs, The small battery devices do already a great job.
or just simply torch a glass bowl..
 
Shadooz,

Alexis

Well-Known Member
So 22 more than the TI, faster heat up time



As dabbing is easier, faster than cooking herbs, The small battery devices do already a great job.
or just simply torch a glass bowl..
I think the analogue is 36. I’m confident the DigiTi has twice the horsepower.

And I can’t use rosin at all, I tried it 2018, we grew a superb crop, I bought a good press, but my immune system rejects the rosin, from the same flower it far more readily accepts.

Like a severe and intolerable allergy reaction, was totally unexpected, I hoped on paper, vaping rosin would be gentler on my very sensitive respiratory system, allergy and irritation wise.

It’s a unique abnormal, unnecessary immune response ultimately.

I sold the press and never looked back.
 
Alexis,

Shadooz

Well-Known Member
I think the analogue is 36. I’m confident the DigiTi has twice the horsepower.
It's written 50 on my psu.
And as the digiti reach it numbers in 3m, so 4m preheat with heatsoak, and i preheat my TI between 3m30 and 5m.
I'm confident it's less than double :sherlock:

And I can’t use rosin at all, I tried it 2018, we grew a superb crop, I bought a good press, but my immune system rejects the rosin, from the same flower it far more readily accepts.

Like a severe and intolerable allergy reaction, was totally unexpected, I hoped on paper, vaping rosin would be gentler on my very sensitive respiratory system, allergy and irritation wise.

It’s a unique abnormal, unnecessary immune response ultimately.

I sold the press and never looked back.
I've never used or seen concentrates, excepted hash...
I Wanted to do some with bottom, lower grade, flowers. But rosin need apical ones, so i can only go solvent extraction that will cost for maybe poor product...
As i've never tried, it will be risky, if like u, i dislike it...
 
Shadooz,

Alexis

Well-Known Member
It's written 50 on my psu.
And as the digiti reach it numbers in 3m, so 4m preheat with heatsoak, and i preheat my TI between 3m30 and 5m.
I'm confident it's less than double :sherlock:


I've never used or seen concentrates, excepted hash...
I Wanted to do some with bottom, lower grade, flowers. But rosin need apical ones, so i can only go solvent extraction that will cost for maybe poor product...
As i've never tried, it will be risky, if like u, i dislike it...
I think it will say on the website I’ll check it when I’m not too cained lol. I was sure the Digital was stated on release to be double watts.

72 vs 36. Not saying you are wrong, that’s just my recollection.

You can live without Rosin. Lots people actually switched exclusively to Rosin, then after a period back to flower, missing something, too expensive for some, or experiencing respiratory side effects.

Now if I’m permitted a future, to see a day where my specially fertilised cannabis supply is ample and quality enough, two no brainers for me to try are- bubble hash, and…Dry sift.

That would be the ticket. My immune system I feel is far more likely to not flag a response to the sift, the bubble hash is less predictable.
 
Last edited:
Alexis,
  • Like
Reactions: arb

invertedisdead

PHASE3
Manufacturer
And I can’t use rosin at all, I tried it 2018, we grew a superb crop, I bought a good press, but my immune system rejects the rosin, from the same flower it far more readily accepts.
Regarding sift and hash: I think both are lovely, but I would probably expect concentrates have too much terpenes for you and flower has too much plant material. Which would make sense why you seem to have better luck with edibles. Might try decarbed concentrates if you ever come back around to it.
 
Last edited:

Alexis

Well-Known Member
Regarding sift and hash: I think both are lovely, but I would probably expect concentrates have too much terpenes for you and flower has too much plant material. Which would make sense why you seem to have better luck with edibles. Might try decarbed concentrates if you ever come back around to it.
Thanks for the suggestion. If you mean decarbed concentrate edibles, I’ve envisaged that, the process, but I wasn’t going to keep and use my press for that, our flower edibles suffice and are easy enough.

I doubt I could vape rosin anyhow.

You are right, you follow of course and actually pay attention I’m well aware, it’s honestly the only explanation as to why my body rejects the EVO and Glass Symphony any temp, hit, but doesn’t produce a similar immune response to the Elev8r even hugest hits possible, identical materials, similar stoning power (Elev8r high is stronger than EVO high IMO), above the standard irritation and sensitivity, as with any vaporizer not flagged for an extra immune response, regardless of materials and hit size, temp.

But I do have the fullest confidence in dry sift. On paper, that’s ideal as an alternative to rosin that was never to be, taking the plant matter out of the flower.

Bubble hash I can’t predict because it’s more than a simple shuffled separation.

I would need good weed, amply, I feel. Difficult to ensure in UK climate.

I do have intentions to acquire some clean hash/pollen and decarb for edibles, but slow living atm very busy with numerous healing protocols.
 

invertedisdead

PHASE3
Manufacturer
Thanks for the suggestion. If you mean decarbed concentrate edibles, I’ve envisaged that, the process, but I wasn’t going to keep and use my press for that, our flower edibles suffice and are easy enough.

I doubt I could vape rosin anyhow.

You are right, you follow of course and actually pay attention I’m well aware, it’s honestly the only explanation as to why my body rejects the EVO and Glass Symphony any temp, hit, but doesn’t produce a similar immune response to the Elev8r even hugest hits possible, identical materials, similar stoning power (Elev8r high is stronger than EVO high IMO), above the standard irritation and sensitivity, as with any vaporizer not flagged for an extra immune response, regardless of materials and hit size, temp.

But I do have the fullest confidence in dry sift. On paper, that’s ideal as an alternative to rosin that was never to be, taking the plant matter out of the flower.

Bubble hash I can’t predict because it’s more than a simple shuffled separation.

I would need good weed, amply, I feel. Difficult to ensure in UK climate.

I do have intentions to acquire some clean hash/pollen and decarb for edibles, but slow living atm very busy with numerous healing protocols.

I meant vaping decarbed concentrate - many historical cannabis using cultures decarbed their material before consuming. Most notably in Afghani style black hash. But even the sift from Morocco and such was often dried and cured for a year+ before sifting.

You only use the elev8r torched, correct? Some people find static temperature vaping harsher than dynamic vaporizing. My buddy Biohacker says the same thing about enails compared to torched nails. Maybe why the Dynavap also works fairly well for you.

Dry sift is great to vape, even average grade works well. I think it's way better than flower. No grinding, more flavor, more actives, less cellulose and unvaporizable plant material. In some aspects it's harder to make than rosin though. Like true high grade, but that quality isn't really necessary when vaporizing.

Water hash is fantastic IMO. Full melt hash dabs being the holy grail for me. But it definitely requires more skill/work involved, especially with the drying process.
 

Alexis

Well-Known Member
I meant vaping decarbed concentrate - many historical cannabis using cultures decarbed their material before consuming. Most notably in Afghani style black hash. But even the sift from Morocco and such was often dried and cured for a year+ before sifting.

You only use the elev8r torched, correct? Some people find static temperature vaping harsher than dynamic vaporizing. My buddy Biohacker says the same thing about enails compared to torched nails. Maybe why the Dynavap also works fairly well for you.

Dry sift is great to vape, even average grade works well. I think it's way better than flower. No grinding, more flavor, more actives, less cellulose and unvaporizable plant material. In some aspects it's harder to make than rosin though. Like true high grade, but that quality isn't really necessary when vaporizing.

Water hash is fantastic IMO. Full melt hash dabs being the holy grail for me. But it definitely requires more skill/work involved, especially with the drying process.
Valued and appreciated thoughts. Thanks for clarifying too. I would “inhale” lol, some decarbed Concentrate, but I don’t think it was the lack of decarbing which caused my immune system to outright reject rosin.

Terpenes are known for causing irritation, but everything in the rosin I pressed was in the flower I pressed it from, but my immune system just wouldn’t have it. I don’t think decarbing the concentrates would stop my immune system going on alert.

I definitely appreciate the value, and importance of decarbing. We decarb all edibles in oven simply.

I did use the Elev8r with coil too a good while. No difference.

Now, if I was free to supply enough consistent heat and light essentially to our crops, to ensure harvest of more potent, less leafy weed, I would try dry sift as a next step.

I’d also try bubble. The process isn’t majorly difficult, and producing sift does require skill and technique.

I’m not in position for that right now but that’s a good sensible path to explore I think.
 

Shadooz

Well-Known Member
I’d also try bubble. The process isn’t majorly difficult, and producing sift does require skill and technique.

Dry sift is great to vape, even average grade works well. I think it's way better than flower. No grinding, more flavor, more actives, less cellulose and unvaporizable plant material. In some aspects it's harder to make than rosin though. Like true high grade, but that quality isn't really necessary when vaporizing.

What will be called the 5 star would be press ?
Cause dry sifting is just collecting the kief ?
The bubble hash, or ice o lator, from amsterdam have tried when smoking is not dabable for sure. So 3/4 star, (i've just learnt there is a star graduation for concentrates...)
So press seems the only way to dab trims leaves ?


Everything look nice, except the price, for all those stuffs...
But then, at the end, when they dab, they always cough right away... :rofl:
And the hype drop...

I have issues with rosin wrecking my lungs and making me cough like crazy.
Kieff and flower not at all.
🤔

So many who don't like it. I won't gonna risk my apical bud... and vaping/eating my trim and bud will end in no loss (when he say, in the video, 50% return from the press is good.. and it's 50% of 50% of his dry sifting ?..)

If i haven't already abv to make edibles, i would make decarb oil from my trims i guess.
But 5h edibles trip are not a 1h bong rip... no need of that much edibles

Now, if I was free to supply enough consistent heat and light essentially to our crops, to ensure harvest of more potent, less leafy weed, I would try dry sift as a next step.

UK is one of the best place on earth to grow indoor. Lot of water, strong power supply...
sad if u can't go in
 
Last edited:

Shadooz

Well-Known Member
Shadooz,
  • Like
Reactions: Alexis

Alexis

Well-Known Member
Hope you are good bro. I did look this up other day, just was waiting for another post then forgot.





Also looked at this earlier:
url=https://ibb.co/KVNb9c1]
5730107-C-46-B9-4-C8-C-95-A7-5-E20-E7-CC8-FD8.jpg
[/url]











url=https://ibb.co/QcLW93F]
CD3-BF091-3186-4-D8-F-A78-F-0-CAB2-D488-D16.jpg
[/url]




Glorious sight and smell even on a moderate 177 mic trip loads edibles and kava too.
 
Last edited:

Shadooz

Well-Known Member
@Alexis i've seen the power wattage, but that's not what my psu says. He may have emphased the digiti power, commercial trick...

Are they today photos ?
If they are, they must be auto, leaves says sativa dominant.

Nice up leaves ;)

Under british sun, u can't really do better :tup:

I may just have "topped" them

My questions were about how to make dab from trims. Rosin will just be awfull (taste) and too many loose. So c02, i guess, for trims..
 
Last edited:
Shadooz,
  • Like
Reactions: Alexis

Alexis

Well-Known Member
@Alexis i've seen the power wattage, but that's not what my psu says. He may have emphased the digiti power, commercial trick...

Are they today photos ?
If they are, they must be auto, leaves says sativa dominant.

Nice up leaves ;)

Under british sun, u can't really do better :tup:

I may just have "topped" them

My questions were about how to make dab from trims. Rosin will just be awfull (taste) and too many loose. So c02, i guess, for trims..
Correct. Autoflowers. It’s the only way we can succeed in our North East facing garden, losing sun behind the house from June 21st basically.

And correct too, Mexican Airlines Autoflower, predominantly Sativa.

Was indeed this morning as well. We just need a bit of weather now and it would be surprisingly high quality, super smelly and tasty weed.

We’ve never topped, we just stick to what we know, but topping is more useful for indoors in one sense, outdoor the light comes from side angles really and penetrates top to bottom, especially with the flowering sites so spread out.

One though, as you see, kind of topped itself. It’s two in one, each individually bigger than the other 4 plants, that one looks the highest Sativa pheno.

We never fail to get a variety of phenos. One looks more indica dominant, more stubby. So always a nice variety, mixture of actives and effect profiles, even within the same strain.
 
Alexis,

Shadooz

Well-Known Member
We’ve never topped, we just stick to what we know, but topping is more useful for indoors in one sense,
True for indica, but a sativa under our sunlight stemmed (? We say "tiger", long thin stem, because of low light).
Topping reduce it and reduce break from one heavy apex.
The natural topping did it though

September harvest ? Even if the 3 more Indica pheno will be too mature
 
Shadooz,
  • Like
Reactions: Alexis

Alexis

Well-Known Member
True for indica, but a sativa under our sunlight stemmed (? We say "tiger", long thin stem, because of low light).
Topping reduce it and reduce break from one heavy apex.
The natural topping did it though

September harvest ? Even if the 3 more Indica pheno will be too mature
We are ahead this summer by 3 weeks, so flowering is in hottest June and July, warmer nights, so speedier. It’s generally, rule of thumb from years experience- 12-13 weeks from seed.

Germinated 1st May I think.

So mid August is well on the cards.

I’m not disputing the benefits of topping.

We will harvest each when prime too, not just wait and crop lot. So nothing will go “over”.
 
Alexis,

Alexis

Well-Known Member
Sativa ? It's +13 weeks from stretch/bloom, and even more with british sunlight, Lille is the same 🌧️:cry:🌧️

Keep the auto-topped sativa one till late late harvest
I’m talking about experience with Autoflowers specifically. It’s always been 13 weeks or under as a rule of thumb, from seed.

You can grow Sativa dominant Autoflowers which finish fast. Example, Dutch Passion Auto Durban Poison.

was always a sturdy, reliable and fast finisher. Was 75 days fully matured, 2019 last.

But, it’s more a case of Sativa dominant, not explicitly in many cases. And the Autoflower, by nature, has a faster life cycle in its nature.

I’m honestly expecting mid August harvest. We’ll see. I’ll keep an update.

Hope your evening goes well shadooz.

Just getting high from last summer’s fruity Bluedream atm.
 
Alexis,
  • Like
Reactions: Shadooz

3migo

Is this a...what day is this?
What temp do you all like to Twax with your Digiti?

For flower only, I typically set the PID to 710, however with twaxing I've noticed that I typically run through the dab far quicker than I polish off the flower, which leaves a pretty rough nasty hit for the last few hits. Don't want to set it too high on the PID & risk combustion.
 
3migo,

Shadooz

Well-Known Member
with twaxing I've noticed that I typically run through the dab far quicker than I polish off the flower, which leaves a pretty rough nasty hit for the last few hits.
Twax... it's just wanting to cook a steak and the french fries in the same pan...

U fuck the dab taste by running it hotter, to extract the herbs..

Only worthy if u want to add flowers terps to a shit concentrate.
Low thc, good tasting bud with high thc, bad tasting concentrate...

If not, it's just good to make "cloud porn" ads...

Take a dab, or extract flowers, but alone..
 

3migo

Is this a...what day is this?
Twax... it's just wanting to cook a steak and the french fries in the same pan...

U fuck the dab taste by running it hotter, to extract the herbs..

Only worthy if u want to add flowers terps to a shit concentrate.
Low thc, good tasting bud with high thc, bad tasting concentrate...

If not, it's just good to make "cloud porn" ads...

Take a dab, or extract flowers, but alone..
I really enjoy twaxing personally. I rarely do straight up dabs.

I changed it up last night and did a much smaller amount of herb with a smaller dab, ran the Herborizer about 10 hotter on the PID, and found that I got pretty even/decent extraction out of the herb & concentrate. Will continue to play around with the ratio.
 
3migo,
  • Like
Reactions: JonServo

bkkbob

Obsessive Collector
Can someone please kindly go to settings 0089 and scroll through the settings and give me the proper settings for the digiti controller. Mine flaked out and lost the settings and won't work properly. I think I need to re-enter them. Much appreciated.
 
bkkbob,
  • Like
Reactions: Shadooz

bkkbob

Obsessive Collector
I'm straight as can be, but I can do gay favors for my herbo settings LOL (that was a joke, and not a prejudiced one). Just trying to describe how much I miss the Herbo after a few days. I think Seb is on holiday so anyone that can help would be greatly appreciated. Maybe no favors like that, but I saw this Real Doll on Howard Stern that should be even better. Kidding again, Help, please! I just need the settings in the 0089 menu. Thanks in advance,
 
Top Bottom