Herbie V2 by Vape Engineering - 510 dry herb vaporizer

almost there

Well-Known Member
Congratulations @Vape Engineering! If I choose to pay with PayPal how do I checkout with the foreign price of 67€?

Also, is it necessary to get spare mesh coils? Do they burn out? Looking forward to this.
 

Ralph

Well-Known Member
Usually the Do not burn out because they Do not glow. I have my mesh now for about 4 months in use and can not detect anything. Anyway we are not 100% sure.

Spare mesh is also planned if someone wants to try making coils themself.

The price is calculated via shipping adress.
When will the bundle be available? Will we be able to use the 20% discount code when it comes back in stock?
 

Grass Yes

Yes
Staff member
Whelp, I had convinced myself I was done buying devices for the year. Really don't need another 510 device, but this seems worth trying. Got three receipts from vape engineering (I think, they are in German). Only one receipt from paypal so I think I am good! :-)

Looking forward to testing! Once Scott posted his video review I was basically sold, and the price is right with that discount code.
 

fangorn

Well-Known Member
What a shopping day !!!
Confirmation e-mail received immediately following my order .. with a maintenance kit!
everything I hoped for, this kit ...

for those who know, I use a flash e vapor as an electronic cigarette atomizer ... with a side by side box ...
I will try to post a photo to give an idea ... it is an excellent, but very large German atomizer ...

suddenly, for discretion, in public and in the family, I imagine switching so much between my electronic cigarette set up and my Herbie V2 setup ... except a true connoisseur ... nobody will see the difference .. . that + the pre-load jars will make it so stealthy !! I look forward to receiving it !

for the box I will take a side by side but not sure whether it is the paramour ... I am looking for a new one for my flash e vapor ... if I put the price, it may be two in one !! nicotine / thc

happy Christmas vape to all
Vielen Danke @Vape Engineering
 

Attachments

  • IMG_20211224_192309~2.jpg
    IMG_20211224_192309~2.jpg
    962.6 KB · Views: 32

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I'm in! Yeah I actually thought it was going to be more like $75 for me with a straight conversion, but I forgot about shipping, and PayPal's own conversion rate, so it came to just under $103 shipped to California btw.

My one concern about the heating element, is that the reason RBT would use a ceramic or mica insulator plate between his steel mesh heaters, is to protect and prevent from any risk of the steel mesh folds touching each other, which as I understood it could cause a short or even overheat the steel and cause it to off gas...

I would think as long as the steel is rigid enough, as it seems to be, it should not move and it should be fine, especially in the durable metal shell... iHeat does not use an insulator plate, the steel mesh is wrapped in a spiral shape around a steel pin instead...

So yeah clearly I'm not too worried, just thought it was something to mention! Look forward to holding this little beauty in my hands, really cool to have one this polished, and seemingly durable, with an all-in-one type design... I have plenty of nice arctic fox and red panda mods to pair it with even if they're not side by side...

This is going to be a fun thread, good crowd jumping in here! :razz:
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I'm on the fence tbh. It's just a shame that the diameter is still too wide for all my compact mods and especially the SBS's... I wonder how it would look protruding on a Pico25. I have an unused SS one looking for a soulmate... might be it?

Come on man, we need you in here!

@Vape Engineering can you confirm it would fit? 25mm is really the max it supports.

I think it's safe to presume it will fit, since this is steel 25 mm I think it is pretty precise, and it fits that side by side mod perfectly, so it should look good on a Pico?? I'm thinking I may put mine on the rainbow RimC I have coming, hopefully lol (shipping limbo)
 

oddjobold

Vape swap shop
I'm on the fence tbh. It's just a shame that the diameter is still too wide for all my compact mods and especially the SBS's... I wonder how it would look protruding on a Pico25. I have an unused SS one looking for a soulmate... might be it?

@Vape Engineering can you confirm it would fit? 25mm is really the max it supports.

Treat yourself, it would be really cool if you joined the party. Would love to hear what @KeroZen thinks!
 

KeroZen

Chronic vapaholic
I got to admit, at that price, and given your review @oddjobold, one would have to be a fool to pass the offer...

I'm concerned that if I order now it might arrive when I'm away from home. I could delay the order but I'd risk getting too late for the initial stock. Or maybe I could order now and just ask @Vape Engineering to delay the shipment... First world problems right?
 

oddjobold

Vape swap shop
Okay I'll give a little update.

I have been playing around with TCR on the paramour and have actually settled on TCR 1000. (I.e. commonly know as TCR100 the suggested TCR by VE). I was not always getting the big clouds on the lower TCR.

I have been using dosing caps exclusively. It keeps everything very clean. Got the knack of opening them now.

This still has the crown for best 510 I have tried. However I think my tinymight hits harder and gets me more stoned, in a shorter space of time. I am switching back to the TM for a while to confirm this, and figure out why this is. I suspect the TM vapor is thicker.

I don't understand how VE are selling this unit so cheap. It seems like an absolute steal to me. I would take this over a v3 pro any day.
 
Last edited:

ChooChooCharlie

Well-Known Member
I also ordered one of the bundles

Nice new vapes out recently, this is one of them

New vape companies this year, too. Brave and dedicated bunch, given the dirty "V" word here in the States, payment processor issues, friggin pact act, covid and supply chain problems, parts and shipping cost increases, sheesh
 

CanikUser19

Trenchtown Rock
Damn it, I'm in too. Thought the Scrooge in me would prevent any more VAS spending until at least the new year. But I have two brushed silver Pico 21700 that have been sitting unused for much too long (my justification for VAS spending gets weaker by the purchase). And until I reach at least twenty 510 vapes, I really don't have a problem, right?
 

Ipe17

Well-Known Member
I really enjoy 510 vapes and i think i have had at some point all of them (otñr most at least). So really curious about this one. I wish it could fit my aster, but i know it does not. I think it will not fit my college dna 60 mod either, as it is max 25mm... but i also have one of those mechlyfe waiting for it... for that price is really hard not to jump in
 

Spleeeno

Horsin around
I really enjoy 510 vapes and i think i have had at some point all of them (otñr most at least). So really curious about this one. I wish it could fit my aster, but i know it does not. I think it will not fit my college dna 60 mod either, as it is max 25mm... but i also have one of those mechlyfe waiting for it... for that price is really hard not to jump in
Well the herbie v2 is 25mm and @Improvaper showcased it with the college dna60 on his Insta, so I'm pretty sure it would fit.
 

ConvectCode1

Well-Known Member
Well the herbie v2 is 25mm and @Improvaper showcased it with the college dna60 on his Insta, so I'm pretty sure it would fit.
I'm in! Yeah I actually thought it was going to be more like $75 for me with a straight conversion, but I forgot about shipping, and PayPal's own conversion rate, so it came to just under $103 shipped to California btw.

My one concern about the heating element, is that the reason RBT would use a ceramic or mica insulator plate between his steel mesh heaters, is to protect and prevent from any risk of the steel mesh folds touching each other, which as I understood it could cause a short or even overheat the steel and cause it to off gas...

I would think as long as the steel is rigid enough, as it seems to be, it should not move and it should be fine, especially in the durable metal shell... iHeat does not use an insulator plate, the steel mesh is wrapped in a spiral shape around a steel pin instead...

So yeah clearly I'm not too worried, just thought it was something to mention! Look forward to holding this little beauty in my hands, really cool to have one this polished, and seemingly durable, with an all-in-one type design... I have plenty of nice arctic fox and red panda mods to pair it with even if they're not side by side...

This is going to be a fun thread, good crowd jumping in here! :razz:
It let me order one just now. But only the 20% off using code HerbieV3. It was right at $100. Not sure if I’m like waitlisted or whatever. It sent me a confirmation email after paying through PayPal. Looks fun. Hand to god I’m not buying any damn vapes in 2022. The last 2 months have been beyond ridiculous. Have a happy holiday!
 

Spleeeno

Horsin around
first stage: oh yeah thats cheap and always great to support the local guys
second stage: I do have a spare p80 mod but those side-by-side mods look way nicer, wonder if there's even sexier stuff out there...
third stage: might as well get those gold plated s&b capsules now...

I have no excuses anymore.
But just look at this thing, its like machineporn: https://www.tek-division.com/product-page/legacy
 
Top Bottom