Healthy Rips Rogue
- Thread starter oddjobold
- Start date
Jill NYC
Portable Hoarder
I haven’t had it long enough to say yet, but it performs very closely to the Edge and F2 - and if you clean those regularly, they‘re easy to maintain. And if you don’t clean it regularly, a little time will still get the oven pretty clean. See here for recent post on Edge cleaning.
I have never noticed a degradation in flavor from my past HR vapes that an oven and/or mouthpiece/screen cleaning didn’t reverse. So I’ve never felt the need to clean air path.
But note, I have several vapes to rotate through, so those who use as a daily driver may have different results.
Any chance you will also carry the old-school hard screens (can’t remember proper terminology)?We will be adding the screens in a package of 10 to our website in the middle of June.
What is width of screen?
I find I get two very different effects from these. I think they compliment each other nicely!
Yeah, that Fierce was/is a BRICK!!! I didn’t realize how much until I just dusted it off.
Last edited:
lauri melissa
Happy Fairy
I am in love with this Rogue Vaporizer!! I did not purchase dosing caps, but in feel fine just tossing some pieces of heaven in the bowl and enjoying the taste. I may get caps, later. HR vapes are fairly easy to keep clean. This is my third (Fury 2, Edge and Rogue) and they just keep getting better. Just so no one was confused, earlier I was speaking of my problems with the AirVape Legacy. The Rogue has become my daily driver. Also, through Sneaky Pete’s Mega Globe, the Rogue is incredible!! Namaste
Clapped_r6
bass in your face
Can anybody confirm that the rogue dosing caps would fit into a fierce?
I bought my fierce on sale, not knowing that it was being discontinued and some parts were no longer available (pretty bummed about it)
I had emailed HR last year and they said the rogue caps should fit the fierce, however the dimensions that I can find are different?
I had a feeling that I should've bought a fury edge instead, should have listened to my gut
I bought my fierce on sale, not knowing that it was being discontinued and some parts were no longer available (pretty bummed about it)
I had emailed HR last year and they said the rogue caps should fit the fierce, however the dimensions that I can find are different?
I had a feeling that I should've bought a fury edge instead, should have listened to my gut
endof3d
Cognitive Dissonance D 5 +
The good folks at HR would be the best people to answer your question. The link to their contact form page is HERE.
The Fierce is a worthy vape and should provide you with years of good service. In addition to their normal warranty, HR offers a 50% off the price of the current replacement model for your Fierce should it ever stop functioning.
The Fierce is a worthy vape and should provide you with years of good service. In addition to their normal warranty, HR offers a 50% off the price of the current replacement model for your Fierce should it ever stop functioning.
Clapped_r6
bass in your face
I've contacted them in the past about this, and they had said they'd work. I do have another contact out to them, just wondering if any peeps have both. According to what I've read, there's a 2mm width difference.
Last edited:
So one week in. Additional observations:
Vibrate function (temp ready/off) is great!
I did not like the bubbler they sell. Though the same could be said about the bubbler I got with the Solo II so YMMV.
I'm not sure it works well with a water/glass piece (bong). I think I'll take out the silicone/screen and try again.
Love the capsules. Cleaning the screen (attached to the silicone) is the only maintenance imo.
I mainly use the mouthpiece for convenience (has a plastic cover) but the adapter/glass stem works better imo. It would have been cool if that plastic cover worked on both adapters. It only works on the mouthpiece (fits perfectly!) but I think I would have preferred a universal cover.
Vibrate function (temp ready/off) is great!
I did not like the bubbler they sell. Though the same could be said about the bubbler I got with the Solo II so YMMV.
I'm not sure it works well with a water/glass piece (bong). I think I'll take out the silicone/screen and try again.
Love the capsules. Cleaning the screen (attached to the silicone) is the only maintenance imo.
I mainly use the mouthpiece for convenience (has a plastic cover) but the adapter/glass stem works better imo. It would have been cool if that plastic cover worked on both adapters. It only works on the mouthpiece (fits perfectly!) but I think I would have preferred a universal cover.
Last edited:
lauri melissa
Happy Fairy
Yes, they are. I have both vapes; Edge and Rogue. The Waterpiece works on both as do the other stems. But, not in the Fury 2. I hope this helps.
Great thanks for that.Yes, they are. I have both vapes; Edge and Rogue. The Waterpiece works on both as do the other stems. But, not in the Fury 2. I hope this helps.
Just ordered the Rogue yesterday on a whim and I hope I made the right decision. Vas has been hitting me hard lately with all these new vapes coming out. I just got the Tafee Bowle two weeks ago but although it's a great device it's delicate to handle and not portable at all. My Crafty is 2 years old now and I can only get one session per charge out of it. My first vape was a Fury 2 but because of the small bowl it soon didn't cut it anymore for me, so i got the Crafty. I tried the Fierce however, before getting the Crafty and it was an awesome vape that gave me better effects than the Fury 2 and it also produced better hits. Ended up going with the Crafty because I wanted to see if the S&B hype is justified. But after two years of using the Crafty I really started to hate the cleaning process (especially the CU) and I also like the sturdy build quality of HR products much better. I pretty much plan on using the Rogue as my on-the-go device instead of my old Crafty. Although information about the device is pretty limited right now, from what I can gather the Rogue should be pretty much on par with the Crafty as far as vapour quality, the effects and efficiency are concerned?
I know I already ordered without doing much research but all I want to know is if the Rogue will be able to match my Crafty performance wise (it's better than the Crafty in every other department, especially battery life)?
Also if anyone has a Mighty or a Fierce to compare to the Rogue, it would be very much appreciated!
I know I already ordered without doing much research but all I want to know is if the Rogue will be able to match my Crafty performance wise (it's better than the Crafty in every other department, especially battery life)?
Also if anyone has a Mighty or a Fierce to compare to the Rogue, it would be very much appreciated!
BigJr48
Well-Known Member
S&B has a 2 yr warranty, contact them for a new Crafty.
510vaporent
Well-Known Member
So after some more time with my Rogue I am much happier with it. I think that without the hula stem or some kind of cooling I was not able to draw long enough to get the clouds I was looking for. With the hula stem and a dosing capsule without the screen in the silicone seal, I get very nice vapor with very little draw resistance. I also get more even AVB with the dosing capsules for some reason.
I also bought 6mm dab pearls from Amazon to fill the glass lining of the stock mouthpiece, and it works very well! So now I get similar cooling to the hula stem with increased portability and stealth.
I really am enjoying using this vape in the morning while drinking my coffee. It’s just a really nice relaxed experience with no technique involved at all
I also bought 6mm dab pearls from Amazon to fill the glass lining of the stock mouthpiece, and it works very well! So now I get similar cooling to the hula stem with increased portability and stealth.
I really am enjoying using this vape in the morning while drinking my coffee. It’s just a really nice relaxed experience with no technique involved at all
endof3d
Cognitive Dissonance D 5 +
Will be replacing a friends dying vape with either a Edge or Rogue for her B-day. I’m sure she would be ecstatic receiving either. I’m aware the Rogue has a larger oven and battery and a few other minor tweaks. The difference in portability or price isn’t an issue.
Question: Are the Rogue and Edge pretty much on par with each other in vapour production and overall experience, or is the Rogue a noticeable step-up or upgrade in this regard? Any assistance would be appreciated.
Question: Are the Rogue and Edge pretty much on par with each other in vapour production and overall experience, or is the Rogue a noticeable step-up or upgrade in this regard? Any assistance would be appreciated.
Shorner
Well-Known Member
The Rogue blows the edge away for vapour production.
Shorner
Well-Known Member
What vapes have you got?I know I am gonna end up with this fucker some time, I just can't seem to get past the idea that I REALLY don't need another vape...
cybrguy
Putin is a War Criminal
Click on my spoiler. Most of it is there other than duplicates of which I have several. Nearly all the links are live.
endof3d
Cognitive Dissonance D 5 +
Good question.
Also it turns out her vape is an old conduction model and her technique is MTL. Is it even possible to draw in a small thick hit in the mouth with a convection vape to replicate a conduction one? Some one in the forum once thought it would be possible with a Tiny Might. Don’t think the Roque hits as hard as the TM.