Discontinued Haze Square

C

caseball2051

Well-Known Member
The SS pods seem to retain heat better, there's no coating flaking off.

I haven't used my aluminum pods since I got my SS ones to be honest. I'd have to switch back to see if there's any noticeable difference. It's been weeks since I switched.

Sorry that's not a super thorough comparison
 
caseball2051,
  • Like
Reactions: dood44
Djsleepy

Djsleepy

Well-Known Member
Imo I don't see noticable difference to effect from ss pods....mine didn't stay nice looking long....got dark spots on bottom a nd inside bottom as well...noticed that some herbs go quicker with ss due to heat retention.....on the fence both get me high....and to me that's all that matters......:smug:
 
D

dood44

New Member
Hi everyone: I just got my base replaced again (the ceramic oven was broken). Haze gave me a completely new one because they're amazing like that. When I got it back, the heating coil would start up but then it would fade off and seemed to stop heating. I got some advice from Haze and it turns out that you really do need to pack the pods very tight and full. Once I did that, it began working like a charm. I'm hoping this will be helpful. I just love this thing and Haze couldn't have been better about helping me out.

dood44 said:
Thanks! They've been amazing. I'm waiting on tenterhooks for Baby to come home!
Click to expand...

She's home!
 
Last edited by a moderator:
ginolicious

ginolicious

Well-Known Member
I’m yet to try this packing really tight. But it’s all I hear lately. I wish I could try it have to wait a few more weeks.

Will the micro dose pods need to be packed the same?

I never packed my Dual V3 tight. Ever.
 
Vapordeflor

Vapordeflor

Well-Known Member
Hi people. My square is acting a bit wierd... the other day it started flashing red light and vivrating after using it.. thought it was overheating alert cause it eventually stopped but today i woke up to the vibrating noise... and it wont stop even charging it.. I left home to work with the vape vibrating.. Any similar cases? or maybe @Haze Vaporizers now whats going on...?
 
Vapordeflor,
Haze Vaporizers

Haze Vaporizers

Well-Known Member
Manufacturer
jupazo said:
Hi people. My square is acting a bit wierd... the other day it started flashing red light and vivrating after using it.. thought it was overheating alert cause it eventually stopped but today i woke up to the vibrating noise... and it wont stop even charging it.. I left home to work with the vape vibrating.. Any similar cases? or maybe @Haze Vaporizers now whats going on...?
Click to expand...
It means the firmware was old and you left it on the charger for extended period of time. Sent you a PM
 
ginolicious

ginolicious

Well-Known Member
Going on the topic of charging. Even with the new firmware, I never leave it hooked up for more than 5 minutes when finished. Thing charges so fast anyways.

I haven’t used mine in a while. And i put it away fully charged. I think the battery has been depleting itself slowly. Is that a regular thing? Or am I cracked out?
 
ginolicious,
P

Petunia Vanish

Well-Known Member
ginolicious said:
Going on the topic of charging. Even with the new firmware, I never leave it hooked up for more than 5 minutes when finished. Thing charges so fast anyways.

I haven’t used mine in a while. And i put it away fully charged. I think the battery has been depleting itself slowly. Is that a regular thing? Or am I cracked out?
Click to expand...

Regular batteries lose their charge if stored longer than a month ( assuming they were charged fully before hand)
 
Petunia Vanish,
P

Petunia Vanish

Well-Known Member
Mattyboo42 said:
My Square makes a buzzing noise when shut off so it's definitely depleting the battery when not in use. It does charge fast so it's not a huge issue.
Click to expand...
I believe it should not make a noise if the unit is powered off.

Did you upgrade your firmware to version 59
 
Petunia Vanish,
C

ChickenNugget

Well-Known Member
Vapin in the usa said:
I believe it should not make a noise if the unit is powered off.

Did you upgrade your firmware to version 59
Click to expand...
Yeah my unit has updated firmware. I had received it back from Haze and they replaced the battery and oven part of the Square. My first unit didn't make the noises but this one does. Oh well. Works better than my first one so it's a minor gripe.
 
ChickenNugget,
RogueGuy

RogueGuy

Well-Known Member
Accessory Maker
I had a phase I unit that had issues that were worked out but then just died. Haze sent me a new one.

Thoughts:

My old one produced big clouds after a couple full heat up hits. The new one produces small to medium clouds but on all hits and seems to extract better than first unit.

But..I have to run it at 430. Its not an issue. I do believe that there is probably a large difference in actual temps of 2 units set at 430.

Overall really happy with the new unit. It seems to require much less technique than my phase I.
 
Djsleepy

Djsleepy

Well-Known Member
RogueGuy said:
I had a phase I unit that had issues that were worked out but then just died. Haze sent me a new one.

Thoughts:

My old one produced big clouds after a couple full heat up hits. The new one produces small to medium clouds but on all hits and seems to extract better than first unit.

But..I have to run it at 430. Its not an issue. I do believe that there is probably a large difference in actual temps of 2 units set at 430.

Overall really happy with the new unit. It seems to require much less technique than my phase I.
Click to expand...


I agree my replacement was different than.phase 1 ....like a different vape...so happy with it.....flavor and high is crazy....
 
Djsleepy,
  • Like
Reactions: RogueGuy
Djsleepy

Djsleepy

Well-Known Member
Hey all....wanted to share this again I know some have had issues with the air path seal and reassembly....I hear about loose.or.jingling air path filters....here is what I do.and I never have a seal issue......after all filters are on seal ....push down in center just to get it attached....then I do three fast ...... what I would call chest compressions ......pushing down hard with your weight behind it....hope it makes sense .....hope it helps .....stay Hazed!
 
Last edited:
Djsleepy,
You must log in or register to reply here.
Top Bottom