Hash pipe

invertedisdead

invertedisdead

PHASE3
Manufacturer
These have been around since before I got into cannabis.

We called them "quartz wands" "or glo rods" here in Southern California.

This was my favorite way to smoke before I started vaporizing.
They actually work with flower too, if you get the temperature just right it's a very unique experience and kind of like a vaporizer if you get it in the goldilocks zone.

These were the main inspiration behind the SandCastle Vapor Wand, the original portable ball vape.
"This open source concept was inspired by quartz glow rods/wands of yesteryear. Ten years ago, before vaping, glow wands were definitely my favorite way to consume, far better than hemp wick. I wanted to approach a similar form factor, but with a design that would be much easier to use for actually vaporizing."

Sand Castle Vapor Wand

Materials Required: 1x Fused Quartz Joint Glass/Sapphire/Ruby Beads 2x Stainless Steel Screens Estimated Build Cost: $25 Some Assembly Required. Back Story: Continuing on the footsteps of the original Sapphire Evaporator, this one came to fruition after my second desktop design broke and I...
fuckcombustion.com
 
coolbreeze

coolbreeze

Well-Known Member
I got one of the KOP hash hammers from Tako--it's really very nice. It works better than the bowl I posted above. Seems to like bubble hash best.
IMG-5893.jpg
 
Last edited:
the_hexx

the_hexx

Team Hash
olysh pops said:
Glenn"s Briar Glass Pipe finally ordered from UK. It's still on trial, in discovery here.

Glass-hasch-Pipe-1.jpg
Click to expand...
Any luck with this? I got the same a while ago and it's now stuck in a drawer, used it a couple of times and ruined a fine lump of hash. It kept sticking to the end of the stick no matter how I tried, and I got almost zero clouds. Hope you figure it out and share your wisdom!
 
olysh pops

olysh pops

Well-Known Member
the_hexx said:
Any luck with this? I got the same a while ago and it's now stuck in a drawer, used it a couple of times and ruined a fine lump of hash. It kept sticking to the end of the stick no matter how I tried, and I got almost zero clouds. Hope you figure it out and share your wisdom!
Click to expand...

Thank you for sharing your experience with Glass hash Pipe.
I've tried three times to vape hash with the pipe but like you I'm wondering about the right temperature not to burn the material and the method to get satisfying clouds. I'm currently testing and waiting for results to share on this thread - although I lack the opportunity to do so at the moment.
 
the_hexx

the_hexx

Team Hash
coolbreeze said:
I assume there's an army of hashheads out there who've mastered these, but mine will take more practice too. I got the hammer above to produce well but getting the flavor will take some adjustment.
Click to expand...
Yes, on the one good hit I managed the taste took me back to my combustion days, harsh and smokey. I guess some people might like this, even though I don’t think most of those frequent this forum :D
 
olysh pops

olysh pops

Well-Known Member
The pipe is as beautiful and attractive as the material, this Halloween afghan looks delicious. Is it Trww's ted Direct Draw cap that you use ?

Edit : I saw your orher post, it s not DD but 18killer by Elev8r ;)
 
Last edited:
Radwin Bodnic

Radwin Bodnic

Well-Known Member
olysh pops said:
The pipe is as beautiful and attractive as the material, this Halloween afghan looks delicious. Is it Trww's ted Direct Draw cap that you use ?

Edit : I saw your orher post, it s not DD but 18killer by Elev8r ;)
Click to expand...
The vape pictured is the Submarine from GVB. It doesn't have a thread here. But the 18mm killer (EMK for short) is the Good Vibes Boro thread on FC.
 
coolbreeze

coolbreeze

Well-Known Member
olysh pops said:
The pipe is as beautiful and attractive as the material, this Halloween afghan looks delicious. Is it Trww's ted Direct Draw cap that you use ?

Edit : I saw your orher post, it s not DD but 18killer by Elev8r ;)
Click to expand...
Radwin Bodnic said:
The vape pictured is the Submarine from GVB. It doesn't have a thread here. But the 18mm killer (EMK for short) is the Good Vibes Boro thread on FC.
Click to expand...
@olysh pops, It's a really nice brick-style vape for hash. I can push it a bit without worrying about wood and it came with different intakes with different levels of turbulation so you can manage how fast you're pouring heat in there. It does get warm though!

The Eighteen Millimeter Killer by Good Vibes Boro

https://streamable.com/a7ta0w
fuckcombustion.com


Wonder how the E-EMKwould do with hash? :brow:
 
add1noob

add1noob

Well-Known Member
I am looking for something to take back home where the hash is plentiful and cheap. I won't have power often or the ability to clean with iso so ideally something that can be cleaned with a q tip. Battery powered is fine but I would like to avoid anything with butane since I don't trust the quality of it over there. Anyone here have recommendations for me? Traditionally they mix it with cigarettes but I'd prefer not to smoke those.

Edit: Do you guys think the Lightning Pen would work well for this?
 
Last edited:
add1noob,
  • Like
Reactions: Bologna
Razhumikin

Razhumikin

Well-Known Member
add1noob said:
I am looking for something to take back home where the hash is plentiful and cheap. I won't have power often or the ability to clean with iso so ideally something that can be cleaned with a q tip. Battery powered is fine but I would like to avoid anything with butane since I don't trust the quality of it over there. Anyone here have recommendations for me? Traditionally they mix it with cigarettes but I'd prefer not to smoke those.

Edit: Do you guys think the Lightning Pen would work well for this?
Click to expand...
You should get a lotus, cause it has super easy cleaning and you wont breath in any butane with it, even though its a butane powered device the heat is outside of the air path. It crushes hash
 
Mr Turnip

Mr Turnip

Well-Known Member
Glad I read this thread was just going to pull the trigger on one from rec vapes.

Really want to try one but just spent a good amount on various hash's. So on one hand I'd like one on another I don't want to spend £50 to not be happy.
 
Perfect_Speed4069

Perfect_Speed4069

I am the beetle in a box that only you can see
Mr Turnip said:
Glad I read this thread was just going to pull the trigger on one from rec vapes.

Really want to try one but just spent a good amount on various hash's. So on one hand I'd like one on another I don't want to spend £50 to not be happy.
Click to expand...
I got one of these from RVS and had very patchy experience, mainly due to my ineptitude, and was happy to give it away. Maybe I was trying too little dry sift at too low a temperature, but I'd definitely recommend any of TRWWs TEDs with a glass ball screen. I particularly favour the Quartz Cap but with a decent creme brulee torch you can't go wrong with anything iof them. I fully expect a lot of different from people here, and like I say, this is probably user error on my part
 
Mr Turnip

Mr Turnip

Well-Known Member
Cheers appreciate your reply.. I have a mega quartz cap just find it a bit big. Rec vapes are sold out of the terpcicle.

I enjoy my vapman and lotus.

Those pipes just look so clean a full of flavour I bet when you get it right it's heaven. But then when it sticks to pipe it's hell.....
 
Cheebsy

Cheebsy

Microbe minion
Just to bring another perspective to this thread, I actually got this to work pretty reliable in the end. I forgot to update this thread though.

Initially I was using my small ronxs dual. That was making the outside plenty hot enough, but it wasn't a penetrating heat. Using a much bigger big buddy you heat to a similar point by watching the flame change colour, but the heat has penetrated much further into the quartz rod. It's a much better experience that I need to remind myself of because I haven't tried in a little while, and it's actually rather pleasant. Definately not the easiest of vape to operate though.
 
Perfect_Speed4069

Perfect_Speed4069

I am the beetle in a box that only you can see
Cheebsy said:
Just to bring another perspective to this thread, I actually got this to work pretty reliable in the end. I forgot to update this thread though.
Click to expand...
Trust @Cheebsy on this @Mr Turnip. And fwiw I think your current selection is excellent. My only addition for hash purposes would be something with a basket, maybe like an eighteen millimeter killer or a Piro. Or if you're less of a vape purist, a nice little Combustion device like the happle
https://imgur.com/a/6lcGDha
 
Mickk

Mickk

Well-Known Member
Raskolnikov said:
www.google.co.uk

Chameleon Glass Aragorn Briar Hash Pipe - Made in USA

Chameleon Glass Pipes - Made in USA. Hand crafted functional artwork for the enjoyment and social pleasure of smoking your favorite legal herb and tobacco
www.google.co.uk www.google.co.uk
j
Click to expand...
Looks perfect in the video. I wonder what the trick is to get it to work so well, and why people in this thread are reporting it not working so well...

Does anyone know if these (or similar variants) are available in Europe? I'd love the way this one looks: https://chameleonglass.com/product/glenns-briar-vented-glass-hash-pipe/ (I'm a sucker for amber colors), but having to order it from the US adds a lot of extra cost
 
Mickk,
You must log in or register to reply here.
Top Bottom