Discontinued Glass Symphony XLR

invertedisdead

PHASE3
Manufacturer
Sorry just posting this for informational purposes and not to compete against your device which is better designed imo. I will most likely have one of each when it comes to everything and of course testing purposes ;)

Anywho, do you mean they filled the cartridge with like Arctic silver? From my experience that stuff is expensive.

Anyway,

It's all good my dude, I don't really see it as competing with mine since my vape is already openly inspired from the Glass Symphony (+Flowerpot) Plus the GS was always designed as a DIY vape, even when he was selling them the parts list and build information was openly available for anyone to build.

Yeah he used a thermal paste similar to arctic silver, but I believe the one he used was copper based. Just like attaching a heatsink, JoJo used the thermal paste to remove the air gaps between the cartridge and the thermometer housing. IIRC he went through a bit of trial and error with that process. It always seemed like the most complicated part of the build, which is what largely inspired me to go the coil route for mine.
 

invertedisdead

PHASE3
Manufacturer
@MikeRotchHertz he used this stuff:

That product says its rated for 600F, but to not affect the integrity of the bond I think that might be on the lower side for this vape. It takes a good amount of heat to penetrate through all the glass and other than the heating element, the thermal paste itself would be the next hottest part of the unit.
 

androponic

vaped.
That product says its rated for 600F, but to not affect the integrity of the bond I think that might be on the lower side for this vape. It takes a good amount of heat to penetrate through all the glass and other than the heating element, the thermal paste itself would be the next hottest part of the unit.
not sure but i got this from his posting. there has to be better solutions out there.
 

MikeRotchHertz

Well-Known Member
It's all good my dude, I don't really see it as competing with mine since my vape is already openly inspired from the Glass Symphony (+Flowerpot) Plus the GS was always designed as a DIY vape, even when he was selling them the parts list and build information was openly available for anyone to build.

Yeah he used a thermal paste similar to arctic silver, but I believe the one he used was copper based. Just like attaching a heatsink, JoJo used the thermal paste to remove the air gaps between the cartridge and the thermometer housing. IIRC he went through a bit of trial and error with that process. It always seemed like the most complicated part of the build, which is what largely inspired me to go the coil route for mine.
I admittedly have not read this entire thread and did not know the parts list had already been established.

The thread probably needed a good bump anyway.
 

ॐNoodles

Well-Known Member
Anyone knows how to get the original (or identical) funnel bowls?
I’ve seen some dhgate bowls that looks similar, but the rail part that holds the screen at place is missing. Would love to get original or identical funnel bowls
Any leads would be appreciated 🙏🏼
 
ॐNoodles,

Zow237

Well-Known Member
Anyone knows how to get the original (or identical) funnel bowls?
I’ve seen some dhgate bowls that looks similar, but the rail part that holds the screen at place is missing. Would love to get original or identical funnel bowls
Any leads would be appreciated 🙏🏼
PM me I have one i will send you. my gs is out of commision and i have two bowls just sitting around
 

ॐNoodles

Well-Known Member
Anyone knows how to get the original (or identical) funnel bowls?
I’ve seen some dhgate bowls that looks similar, but the rail part that holds the screen at place is missing. Would love to get original or identical funnel bowls
Any leads would be appreciated
🙏🏼
And is willing to deliver internationally... :-/
 
ॐNoodles,

SquirrelMaster

Well-Known Member
HEY that's me :) I'm actually adding one more part to the list. I missed the rubber stopper to hold the heater in place
Thank you for compiling that list, I just ordered up most of the parts 😊. This is definitely a cheaper way to fuel the VAS.

For the thermometer piece I bought https://a.aliexpress.com/_m0TAlar
Also from the same seller the cooling tube https://a.aliexpress.com/_mNPzrEB
Keck clips https://a.aliexpress.com/_mt2Popp
And a second bowl piece https://a.aliexpress.com/_mr6INiJ


I picked up the cartridge heater and a PID (I need the Auber for comparing to my other heavies 😂) from the same seller you had listed https://a.aliexpress.com/_mq4C4ht

A cork from https://a.aliexpress.com/_mLIN0X9

I just need glass balls now and I may go Ruby. I have 4mm Boro that would work but I'd rather go 3mm. I also need thermal transfer paste but I'm going to dig around a little more to see what I can find.
 

SquirrelMaster

Well-Known Member
3MM will probably feel very restricted, JoJo used 5MM.
Oh really? I read 3mm in the list so I thought that was standard, thanks for the info. From these pics I was worried anything larger may not fit. https://t.me/VapeIsrael/127423

I have 3mm and 4mm boro balls that I can use to check fitment but that would mean waiting for everything to arrive. Or I just order more stuff so I know I'm covered, hmmm.
 

Hippie

Well-Known Member
For my builds I have been wrapping the element in enough Aluminium kitchen foil so it will slide in and out of the thermometer tube when cold with enough room to expand as it heats so I can also slide the cold heater out and put it in other thermometer tubes and builds like the 19/26 claisen (with or without balls) or the MA2/3 adapter

Be wary of the TopRight heater and controller by the way as they don't mix well with other devices in my experience.
When I connected the heater rod to my spare enail controller it tripped the electric, killed the controller and something important in my PC, and I had to figure out how to program the clocks on the cooker and microwave again
 

ॐNoodles

Well-Known Member
Thank you for compiling that list, I just ordered up most of the parts 😊. This is definitely a cheaper way to fuel the VAS.

For the thermometer piece I bought https://a.aliexpress.com/_m0TAlar
Also from the same seller the cooling tube https://a.aliexpress.com/_mNPzrEB
Keck clips https://a.aliexpress.com/_mt2Popp
And a second bowl piece https://a.aliexpress.com/_mr6INiJ


I picked up the cartridge heater and a PID (I need the Auber for comparing to my other heavies 😂) from the same seller you had listed https://a.aliexpress.com/_mq4C4ht

A cork from https://a.aliexpress.com/_mLIN0X9

I just need glass balls now and I may go Ruby. I have 4mm Boro that would work but I'd rather go 3mm. I also need thermal transfer paste but I'm going to dig around a little more to see what I can find.
Congratulations on assembling a Glass Symphony 🥳
What part did you get for main body?

*btw. don’t know why 3mm beads are listed… the OG is with 5mm.
The ones I got from Ali are ~4.5mm and are just by bit too small and almost leaks out of the body
 

Abysmal Vapor

Supersniffer 2000 - robot fart detection device
You dont see it atm,but when you block scripts you can bypass the pass requirement.
There are both available US kits in 110v and EU kits 220v for 180$ and 90$ controllers.
@jojo monkey are you back ? Or someone is trying to earn on your back ?
It seems like all the glass bowl option that jojo made custom are in the site,so i really hope it is him :) !
""""This is a demo store for testing purposes — no orders shall be fulfilled.""
12345.png

123.png
1234.png
 
Last edited:

Abysmal Vapor

Supersniffer 2000 - robot fart detection device
maybe it's some kind of scam? the https even fails, no way he would return without https and coming say hi here
It is not lanched yet,not even accessible. Says year 2022,from the looks site is in the making. Lets hope for the best,it is very little chance this is a scam,such a niche product :) ! Also warns people : """"This is a demo store for testing purposes — no orders shall be fulfilled.""
Maybe he wants to set up things smooth and running before coming to say hi :)!
 
Last edited:

Spleeeno

Horsin around
I mean the date is right in the first image file you linked, and its not 2022 - its 2018.
This just seems to be the test version of the shop that's still available on the net - like the whole url really - since the creator disappeared.
 
Spleeeno,

Abysmal Vapor

Supersniffer 2000 - robot fart detection device
I mean the date is right in the first image file you linked, and its not 2022 - its 2018.
This just seems to be the test version of the shop that's still available on the net - like the whole url really - since the creator disappeared.
Where do you see 2018,sry i am a bit confused Site age checker says it is created this year.
Edited:Guess i the one i used was not functioning properly >
#Value
DomainSymphony.glass
Domain Age3 Years, 331 Days
Domain Created Date11th-Jun-2018
Domain Updated Date17th-May-2021
Domain Expiry Date11th-Jun-2022
Sadly you are right,this seems like a false alarm. sry dudes.
 
Last edited:

GoldenBud

Well-Known Member
Where do you see 2018,sry i am a bit confused Site age checker says it is created this year.
Edited:Guess i the one i used was not functioning properly >
#Value
DomainSymphony.glass
Domain Age3 Years, 331 Days
Domain Created Date11th-Jun-2018
Domain Updated Date17th-May-2021
Domain Expiry Date11th-Jun-2022
Sadly you are right,this seems like a false alarm. sry dudes.
we know that jojo is from USA, i pinged the address and got reply from IP 144.202.90.52
what can you find about it? can't find here
 
GoldenBud,
Top Bottom