Mulehead
Well-Known Member
+1 maybe 2, if swappable batteries are incorporated!
Firewood Vaporizer
- Thread starter Bouldorado
- Start date
+1 maybe 2, if swappable batteries are incorporated!
spectruhmz
Member
The firewood does have swappable batteries in the form of a battery pack.
That's a stretch. I love the Firewood 3.0 but an aftermarket accessory is hardly swappable batteries.
spectruhmz
Member
I don't know what its like to have an air lol so I guess its just perspective.
vapen00b
Many vapes & accessories. Always happy to help
Proud to have joined the club.
Look at these beauties
It's a great device. Didn't have to change the temp setup s. Worked just fine out of the box.
Compared to my beloved ESV the vapor is definitely hotter and harsher - but it's manageable and if you attach a different mouthpiece or bubbler these "issues" won't exist (am a little sensitive in this regard).
Flavorwise I find the ESV a small step ahead, a little richer and more distinguished. But I love the fw already - huge advantage for me: you can really sip this thing, not possible this way with the ESV. You get great results easily with the wood and it hits hard... I think it's super well extracting, very efficient.
Put in only a pinch, maybe 1/4 capsule.. Maybe even less. Got some nice hits. Later on I just put some more in, about 1/3 max.1/2 I'd say, and it really smashed me... Wow..! Never underestimate the power of an efficient vape..
Marc did and does a fanatic job. What a great vape. Love the wood, the looks, the smell, the feel. Very, very nice!
Look at these beauties
It's a great device. Didn't have to change the temp setup s. Worked just fine out of the box.
Compared to my beloved ESV the vapor is definitely hotter and harsher - but it's manageable and if you attach a different mouthpiece or bubbler these "issues" won't exist (am a little sensitive in this regard).
Flavorwise I find the ESV a small step ahead, a little richer and more distinguished. But I love the fw already - huge advantage for me: you can really sip this thing, not possible this way with the ESV. You get great results easily with the wood and it hits hard... I think it's super well extracting, very efficient.
Put in only a pinch, maybe 1/4 capsule.. Maybe even less. Got some nice hits. Later on I just put some more in, about 1/3 max.1/2 I'd say, and it really smashed me... Wow..! Never underestimate the power of an efficient vape..
Marc did and does a fanatic job. What a great vape. Love the wood, the looks, the smell, the feel. Very, very nice!
Frostiestone
Well-Known Member
Proud to have joined the club.
Look at these beauties
It's a great device. Didn't have to change the temp setup s. Worked just fine out of the box.
Compared to my beloved ESV the vapor is definitely hotter and harsher - but it's manageable and if you attach a different mouthpiece or bubbler these "issues" won't exist (am a little sensitive in this regard).
Flavorwise I find the ESV a small step ahead, a little richer and more distinguished. But I love the fw already - huge advantage for me: you can really sip this thing, not possible this way with the ESV. You get great results easily with the wood and it hits hard... I think it's super well extracting, very efficient.
Put in only a pinch, maybe 1/4 capsule.. Maybe even less. Got some nice hits. Later on I just put some more in, about 1/3 max.1/2 I'd say, and it really smashed me... Wow..! Never underestimate the power of an efficient vape..
Marc did and does a fanatic job. What a great vape. Love the wood, the looks, the smell, the feel. Very, very nice!
Does every firewood come with the spare capsules and capsule holder?
vapen00b
Many vapes & accessories. Always happy to help
No, they go extra. I think if you order two additional mouthpieces, you get the holder. Mine was unfinished - but you get some wax for that too. Fun to do.
Go for it!
hippogriff
Well-Known Member
Been dialing in my FW (+6 feels a little bit like training wheels now) and, wow, not filling the capsule makes a huge difference for me. Wasn't liking mouthpiece sooo short as stock, found this 3"x10mm glass piece at a random headshop. Even tho stock glass is 11mm, 10mm works well, the silicone and gasket are pretty forgiving. Still good feel for the heat at this length, super smooth vapor, next I'll trim almost 1 1/4" for ideal form factor.
Edit: sorry, not sure image is making it thru. http://imgur.com/5ktpABj
Modnote: Edited to display image
Last edited by a moderator:
I really love these mouthpieces people are rigging together. I love how customizable this vape is. I'm just filled with FW3 love right now
Been dialing in my FW (+6 feels a little bit like training wheels now) and, wow, not filling the capsule makes a huge difference for me. Wasn't liking mouthpiece sooo short as stock, found this 3"x10mm glass piece at a random headshop. Even tho stock glass is 11mm, 10mm works well, the silicone and gasket are pretty forgiving. Still good feel for the heat at this length, super smooth vapor, next I'll trim almost 1 1/4" for ideal form factor.
Edit: sorry, not sure image is making it thru. http://imgur.com/5ktpABj
perennialflare
Well-Known Member
I'm heavily considering getting a FW3 as my first vaporizer. I know 3.0 probably hasn't been out all that long, so it would be hard to say, but can anyone comment on the longevity/reliability of Firewoods in general? Normally a 1 year limited warranty would worry me, but it seems like that's mostly because this is a small company that probably can't afford great long super comprehensive warranties (rather than a large company that could afford it but doesn't trust their own product, or maybe intentionally made their vape to last only a few years, just like cell phones are only designed to last a few)
Basically, as someone who would use it at MAX maybe once per day, without employing weird complicated techniques to increase longevity, I'd want it to last well longer than a single year
Also, from what I've seen, it looks like the only thing I'd need to really maintain would be the mouthpiece and capsule, right?
Basically, as someone who would use it at MAX maybe once per day, without employing weird complicated techniques to increase longevity, I'd want it to last well longer than a single year
Also, from what I've seen, it looks like the only thing I'd need to really maintain would be the mouthpiece and capsule, right?
The batteries are user replaceable. As batteries are usually the first point of failure in consumer electronics this is huge for the longevity of the device. In some devices when the battery fails you have to either toss the device or send it in for the batteries to be replaced. The FW3 uses a relatively common battery model that once your device's original batteries die you'll be able to take those out and put in new ones. As far as actual hardware the design seems to be a solid unit and most haven't had problems. There was a FW2.1 user posting a few pages back reporting that their device still works pretty damn well. Given the remarkably low failure rate based on user reports here I'd guess it'll last long enough for you to have more than got your money's worth out of it. I think it's far more likely that another iteration of the Firewood comes along that you have to have and you retiring your old one for the new one is more likely than your old one dying. As long as you don't actively mistreat it I'm sure it'll last long enough. Don't leave it in a freezing or hot car for a while, don't get it wet, don't do anything to it that you wouldn't do to another small consumer electronics device and keep in mind that it's wood so don't do shit that harms wood to it and you'll be fine. Maybe put some wood conditioner on it from time to time, as wood can dry out and crack and that to me seems like the next most likely point of failure after the batteries. Also, I'm pretty sure maple lasts longer than walnut as a type of wood, but if you're really concerned do a bit of research into which type of wood tends to have more longevity.
Last edited:
Skyscraper
Well-Known Member
Frostiestone
Well-Known Member
consider a desktop?
The E-nano is my tool for all things cannabis, usually.
If you must go portable, I just jumped on the FW3 train, and don't expect to be disappointed.
JJ420
chillin on the couch, sippin off a 22 ounce.
Been playing around with my new FW3 and after a bit of a learning curve (stoking is KEY with this vape) along with exploring the fine-adjustment temperature hack, I gotta say this thing has really blown me away!! 
couple of key points:
- Quick half second pull to get the thing fired up, wait approximately 5 to 8 seconds, then a slow to moderate and steady draw.
- I've settled on a +21 degree across the range increase by doing the heat adjustment hack. The factory settings are all a bit too low for my liking.
Although all of my vapes are desktop units, this isn't my first use of a portable, in fact I had gifted a friend an MFLB which I got to use and know a lot as well, later with a power adapter. Really this had turned me on to portables as we were both working long shifts and it was really nice to get ripped on breaks and such.
The Firewood's capsule, slim design (perfect for coat pockets), convection heat, and user replaceable batteries are all the things which sold me.. plus the craftsmanship is really top notch. For the price it is perhaps the best value going right now.
I've wanted a Mighty for a while, but its high price and questionable build quality are what's keeping me from pulling that trigger. For that amount of money it really shouldn't look and feel like a kids toy. Put it this way - you can buy two FW3's and still come out a hundred bucks cheaper!
The FW3 is a real contender to the MFLB imo. The both use roughly the same amount of herb, and both vapes have their slight advantages over one another. Draw speed and stoking technique are also very similar to one another.
Really can't go wrong on a Firewood. For the price it's really a no-brainer!!
couple of key points:
- Quick half second pull to get the thing fired up, wait approximately 5 to 8 seconds, then a slow to moderate and steady draw.
- I've settled on a +21 degree across the range increase by doing the heat adjustment hack. The factory settings are all a bit too low for my liking.
Although all of my vapes are desktop units, this isn't my first use of a portable, in fact I had gifted a friend an MFLB which I got to use and know a lot as well, later with a power adapter. Really this had turned me on to portables as we were both working long shifts and it was really nice to get ripped on breaks and such.
The Firewood's capsule, slim design (perfect for coat pockets), convection heat, and user replaceable batteries are all the things which sold me.. plus the craftsmanship is really top notch. For the price it is perhaps the best value going right now.
I've wanted a Mighty for a while, but its high price and questionable build quality are what's keeping me from pulling that trigger. For that amount of money it really shouldn't look and feel like a kids toy. Put it this way - you can buy two FW3's and still come out a hundred bucks cheaper!
The FW3 is a real contender to the MFLB imo. The both use roughly the same amount of herb, and both vapes have their slight advantages over one another. Draw speed and stoking technique are also very similar to one another.
Really can't go wrong on a Firewood. For the price it's really a no-brainer!!
Last edited:
RUDE BOY
Space is the Place
I did try it and it helps for a little quicker session (I think), the FW3 is serving as my daily right now but I'm down to using .5 gm a day or less right now in 3-4 sessions.
Took me much longer to learn how to get consistent results with this then any other vape yet but it was worth investing the time into getting it down.
perennialflare
Well-Known Member
By stoking do you just mean shaking/rearranging herb for even cooking? I thought that would be a little difficult in a capsule, can you give me a small pointer on how its done? (given that I'm only getting my first vape soon, so I don't know anything)
JJ420
chillin on the couch, sippin off a 22 ounce.
Stoking is simply taking a quick pull to activate the heating element. and letting it sit for a few seconds before drawing from the vape. Similar to the MFLB where you push the battery in and hold for a few seconds before hitting it.
Skyscraper
Well-Known Member
I did try it and it helps for a little quicker session (I think), the FW3 is serving as my daily right now but I'm down to using .5 gm a day or less right now in 3-4 sessions.
Did you use an extra screen or tamp the herb to keep it from falling on the heater? Everybody seems to get mixed results when it comes to visual feedback (clouds). When it comes down to it the effects are most important but good vapor production satisfy my psyche as a recreational user.
IME convection vapes like 7th floor and VaporGenie products can give nice big hits of visible vapor very quickly.
My first vape was the MFLB and I used that for almost a year. The only thing I didn't like was the vapor being somewhat harsh for how wispy it was. I know most of it went into my lungs though.
RUDE BOY
Space is the Place
I didn't have a need to tamp or extra screen using the "straw method" of filling my capsule, like using a nylon stem for the UD or HI it just seems to stay put for me once it's in the capsule. I am now getting good visible vapor on most hits with some really big clouds at times. The effects are outstanding for the amount of herb I'm using per load clouds or not which is why I'm using it so much right now. Like i said above for me the learning curve was difficult to overcome for a while but now I'm very happy I didn't give up on it too early.
Now when I use it i can't even tell why it was so hard to get decent results other then needing to step up the temp, wait for the coil to glow(6-8seconds) after setting the temp and before taking the first hit, and drawing much slower then I was originally. Those three things changed my experience greatly.
Last edited:
Mr Mellish
Well-Known Member
I didn't have a need to tamp using the "straw method" of filling my capsule, like using a nylon stem for the UD or HI it just seems to stay put for me once it's in the capsule. I am now getting good visible vapor on most hits with some really big clouds at times. The effects are outstanding for the amount of herb I'm using per load clouds or not which is why I'm using it so much right now. Like i said above for me the learning curve was difficult to overcome for a while but now I'm very happy I didn't give up on it too early.
Now when I use it i can't even tell why it was so hard to get decent results other then needing to step up the temp, wait for the coil to glow(6-8seconds) after setting the temp and before taking a hit, and drawing much slower then I was originally. Those three things changed my experience greatly.
Agreed! Not at all sure why I had issues early on! I never tamp it down or anything and I've now started backing down on how much I load. With a fully loaded capsule, I would do 5-6 draws at #3 (amazing flavor) and then move to setting #4. After 8 draws, I'm still getting impressive clouds but by then I'm getting what I needed and I'm getting bored so I stop and reload for later. Probably wasting some but I have very small windows in which to partake.
JJ420
chillin on the couch, sippin off a 22 ounce.
I'm doing the opposite, and that is: first hit (using stoking method) at setting #4, followed by the next two hits (regular style) at setting #3. Medium sized noticeable clouds for me. Yeah they're not going to be Mighty clouds per say, but much more bigger than something like an MFLB.
Still very much playing around with the unit and getting more familiar, though success has definitely been achieved!
paytonpenn
Level 30 Nature/Healer
This is kind of a part two, I suggest reading part one on the grassHopper thread.
I understand not everyone goes on reddit; I did a comparison of the Firewood against the grassHopper. If you would like me to include more details or go over other subjects please ask. I kind of just ranted about time management and extraction.
The Firewood battery life is longer but it sacrifices the quick and easy battery swapping. You do get the ability to use battery packs if you don't have any batteries in the Firewood or if they are dead or if you want to ensure you're having a full powered session. I'd say I get at least 40-50+ hits from the Firewood. It may sound like double but the amount of sessions I can go through with the Firewood far surpass the Hopper.
Going back to time management I feel I should mention the Firewood's disadvantages in that category. I mentioned the batteries weren't the easiest and quick process; they are held in by 4 lengthy screws that require a flat-blade/slotted screwdriver. I have had 3 Firewood 3.0 units and they have had pretty snug holes for where the batteries slide in to; wouldn't rely on changing those batteries very often, I know the ones I have for my battery packs are a bit snug and will most likely get stuck if I attempt to insert them in there.
When it comes down to usage you must press and hold the bottom button for a few of seconds to turn the unit on. The unit will buzz on, buzz battery, and wait for you to choose a temp.
An example of heat up time comparison;
(First test) the gH heats to max temp before the Firewood starts its heatup (Was able to select temp four and heard 3 buzzes before the blue light came on).
(Second Test) the gH (heated once until it reached max temp then immediately turned off) heats to max temp before the Firewood finishes telling its battery life.
Not a big deal, but the real wait for the unit to start heating has yet to begin. By the time it has heated and you can draw you are probably choking on a cloud from the Hopper. Bowl loading process takes a while, if you purchase two capsules at a time you get a holder which simplifies swapping on the go. The capsule is too hot to touch after a session unless you use the unit log style and remove it after every hit or only take a couple hits. That inconvenience slows down or impedes the reloading process which is pretty quick on the Hopper. Maintenance takes a bit longer with the extra screens; the Hopper is a simple iso'd qtip swab.
I think the Firewood is the clear winner in extraction.
..and back extraction; I prefer an extraction further than the picture before; something like the extraction in this video (abv shot at 1:18).
I also prefer being able to finish the load to that entirety in 1-3 hits; the closer the Hopper comes is 6 hits and its still not really that finished. Which kind of sucks considering that I am trying for that result from less than .1g of herb.
The extraction I prefer is a high temp one, a bigger focus towards CBD. A big advantage of the Firewood over the grassHopper is a higher temperature and the ability to scale the internal temperature higher. But it does introduce the inconvenience of combusting with improper usage which isn't a concern for the Hopper.
So.. more words right.. Flavor is probably not something you want my opinion on. I focus a lot on high temps and really enjoy the flavor of some rich dark abv. It kind of depends on the day or situation with my vape. Since the Firewood can combust you can get that smell in your unit. Its gone after a good session unless you just blew smoke all into it. You can also get a particulate or something to fall down and it might make it seem like you combusted or something. The grassHopper just doesn't taste that stellar; its not bad but I've got some pretty pure units. There's metallic feeling from it and the vapor feels dirty when I am milking a tube. On low temps it is very flavorful but doesn't milk on low.
I personally am siding with the Firewood on flavor. The wood is very noticeable at first, but you begin to enjoy it and it blends in with herb complimenting it. grassHopper is better at keeping the flavor consistent and shines on temps lower than 3.5. Overall the Firewood tastes pure to me (not VAP3 pure); but from that first light low temp hit to the final rich taste of blackness its definitely more pure than the gH.
(Primarily intended for newer reddit users) I don't feel I covered it but production is a lot different than extraction. I will have to take another video of my grassHoppers for a better example but those units have better production than extraction, while the Firewood is the opposite with a better extraction than production. When I say production I am referring to vapor production, extraction is referring to how thoroughly the unit darkened the herb for the hits taken (herb can still be fully darkened but poorly extracted). The grassHopper can give you a hit that makes you stammer and drool. Where as the Firewood will have the same size load black but the water pipe will have gotten skim at best.
Here are my Firewood 3.0 videos (in order of popularity), 1 - 2 - 3 - 4
I understand not everyone goes on reddit; I did a comparison of the Firewood against the grassHopper. If you would like me to include more details or go over other subjects please ask. I kind of just ranted about time management and extraction.
The Firewood battery life is longer but it sacrifices the quick and easy battery swapping. You do get the ability to use battery packs if you don't have any batteries in the Firewood or if they are dead or if you want to ensure you're having a full powered session. I'd say I get at least 40-50+ hits from the Firewood. It may sound like double but the amount of sessions I can go through with the Firewood far surpass the Hopper.
Going back to time management I feel I should mention the Firewood's disadvantages in that category. I mentioned the batteries weren't the easiest and quick process; they are held in by 4 lengthy screws that require a flat-blade/slotted screwdriver. I have had 3 Firewood 3.0 units and they have had pretty snug holes for where the batteries slide in to; wouldn't rely on changing those batteries very often, I know the ones I have for my battery packs are a bit snug and will most likely get stuck if I attempt to insert them in there.
When it comes down to usage you must press and hold the bottom button for a few of seconds to turn the unit on. The unit will buzz on, buzz battery, and wait for you to choose a temp.
An example of heat up time comparison;
(First test) the gH heats to max temp before the Firewood starts its heatup (Was able to select temp four and heard 3 buzzes before the blue light came on).
(Second Test) the gH (heated once until it reached max temp then immediately turned off) heats to max temp before the Firewood finishes telling its battery life.
Not a big deal, but the real wait for the unit to start heating has yet to begin. By the time it has heated and you can draw you are probably choking on a cloud from the Hopper. Bowl loading process takes a while, if you purchase two capsules at a time you get a holder which simplifies swapping on the go. The capsule is too hot to touch after a session unless you use the unit log style and remove it after every hit or only take a couple hits. That inconvenience slows down or impedes the reloading process which is pretty quick on the Hopper. Maintenance takes a bit longer with the extra screens; the Hopper is a simple iso'd qtip swab.
I think the Firewood is the clear winner in extraction.
..and back extraction; I prefer an extraction further than the picture before; something like the extraction in this video (abv shot at 1:18).
The extraction I prefer is a high temp one, a bigger focus towards CBD. A big advantage of the Firewood over the grassHopper is a higher temperature and the ability to scale the internal temperature higher. But it does introduce the inconvenience of combusting with improper usage which isn't a concern for the Hopper.
So.. more words right.. Flavor is probably not something you want my opinion on. I focus a lot on high temps and really enjoy the flavor of some rich dark abv. It kind of depends on the day or situation with my vape. Since the Firewood can combust you can get that smell in your unit. Its gone after a good session unless you just blew smoke all into it. You can also get a particulate or something to fall down and it might make it seem like you combusted or something. The grassHopper just doesn't taste that stellar; its not bad but I've got some pretty pure units. There's metallic feeling from it and the vapor feels dirty when I am milking a tube. On low temps it is very flavorful but doesn't milk on low.
I personally am siding with the Firewood on flavor. The wood is very noticeable at first, but you begin to enjoy it and it blends in with herb complimenting it. grassHopper is better at keeping the flavor consistent and shines on temps lower than 3.5. Overall the Firewood tastes pure to me (not VAP3 pure); but from that first light low temp hit to the final rich taste of blackness its definitely more pure than the gH.
(Primarily intended for newer reddit users) I don't feel I covered it but production is a lot different than extraction. I will have to take another video of my grassHoppers for a better example but those units have better production than extraction, while the Firewood is the opposite with a better extraction than production. When I say production I am referring to vapor production, extraction is referring to how thoroughly the unit darkened the herb for the hits taken (herb can still be fully darkened but poorly extracted). The grassHopper can give you a hit that makes you stammer and drool. Where as the Firewood will have the same size load black but the water pipe will have gotten skim at best.
Here are my Firewood 3.0 videos (in order of popularity), 1 - 2 - 3 - 4
Last edited:
Edric al-Fali
Well-Known Member
I have a review that I haven't gotten around to cleaning up and posting.
There are a few people on the fence about getting a Firewood 3. I can say that if you are interested in it for reasons, then get it. If you are already aware of the disadvantages of this piece, then you know what to expect. I can honestly say that it does grow on you. It does feel like it needs to be broken in and it feels like it gets better the more you use it.
I got this to use when my hands are busy and I don't want to think about it too much. I just want to take a hit.
That being said, I am most certainly not going to retire my firewood any time soon. It is going to stay inside my coat pocket.
There are a few people on the fence about getting a Firewood 3. I can say that if you are interested in it for reasons, then get it. If you are already aware of the disadvantages of this piece, then you know what to expect. I can honestly say that it does grow on you. It does feel like it needs to be broken in and it feels like it gets better the more you use it.
I got this to use when my hands are busy and I don't want to think about it too much. I just want to take a hit.
Mine has a faulty switch, but if I press harder than normal, it responds so I haven't sent it back yet. Mostly because I don't have a replacement yet. I'm last in line for another certain wooden vape.
That being said, I am most certainly not going to retire my firewood any time soon. It is going to stay inside my coat pocket.
Last edited:
hippogriff
Well-Known Member
These comparisons make a lot of sense to me, and my goal is to limit CBDs. I use a SS hopper and a walnut FW and it's a great combination.
My hopper sessions are <2min, 1/2 filled bowl, 2-3 8sec draws @ 2.2, 2-3 8sec draws @ 3.6
My FW sessions are <5min, 1/2 filled bowl, straight to 3 (+6), 5-8 12-15sec draws
Bowl-size the hopper is slightly bigger, but they're close. Hopper has the clear edge on speed and raw power, and it can achieve that quick shift in perspective I don't get w/ a longer session. FW flavor is just cleaner, and a little better and smoother, and that compliments the slower draws and longer ramp up to very clean and strong effects. Part of the FW effects is that edge in extraction, too, least that feels true in my experience. Both are impressively efficient.
Having both is pretty sweet. The hopper is my go to for a quick bit of euphoric disassociation during the day. The Firewood is perfect when I have time to sit and kinda roll into the present.
Edric al-Fali
Well-Known Member
I did my best to keep it coherent, but I thought it was time to just upload what I thought of the Firewood 3.
My initial impressions are that it's a solid little vape that excels in size and speed for personal use. The price is right.
It's got a steep learning curve, but if you already know how to hit a convection vaporizer or any vape, this should be fairly easy to learn. Using the single button is easy as long as you read the instructions. I personally think this is a one to two person piece because of the relatively small chamber and battery capacity.
My biggest complaint is the draw speed, which does seem to improve after the first few uses. This also isn't so bad after you acknowledge the heater's power. The heater is 25 watts, which is on the low scale. That being said, if you take a slow enough hit, you will get massive clouds. I don't mean slow, I mean slooooooooow. For that "oh wow" hit, you need to puff it like a cigar, take a slow draw untill you feel some heat and that vaporyness, then catch your breath, then take a hit slow enough that it would take 25 to 30 seconds to take a full breath.
The problem comes from the fact that you will be out of breath by the time you finish your first hit.
The draw sense thing was a turn off for me at first, but I do appreciate it now. I now consider it requiring as much thought and effort as a button. Some preheating with a few puffs and a slow preheat draw and you're in business. Using the single button becomes intuitive after a few uses.
Battery life is moderate, but you can expect to drain it quickly while learning to use it. Charge time is 4-6 hours. I don't think this would be good for camping or hiking since there is no way to quickly replenish the power like swapping batteries or refilling butane. I strongly recommend butane for camping. For my daily drive, however, it works great.
It's great for a quick couple hits if you're in a hurry and you can still get blasted.
I don't think I would recommend sharing it with people who've never used a vape before. I have a hard time convincing people of liking vaporizers in general. Bag fill is the only success I've had and only because all the work is done for them by the time they get the bag. But I digress.
My final impression is that it is still a solid vape. It does everything I wanted in a vaporizer and I am glad I got it.
Size and efficiency are among the firewood's positives. The thing constantly gets mistaken for one of those mod boxes. A cop looked at me and didn't even think twice. At work, I leave it out charging on my desk and nobody notices; I do take the capsule and hide that, however. I can get great hits any time I want. The size makes it very portable.
I still consider the weaknesses being the draw speed and heater power: the big result being the learning curve. I do, consider the heater power irrelevant when you learn to hit the firewood properly. I also have, most certainly, noticed a drastic improvement in the draw speed as if the heater needed to be broken in. My best guess is the heat has changed the size and shape of the heater, which is its narrowest point.
Using the single button, there is also an option to go into the settings and raise the temperature ranges. If you don't think it's powerful enough, you can bump it up a few notches. Be careful as the firewood is very capable of combusting what you're trying to vape. Something to consider about such a little heater.
My initial impressions are that it's a solid little vape that excels in size and speed for personal use. The price is right.
It's got a steep learning curve, but if you already know how to hit a convection vaporizer or any vape, this should be fairly easy to learn. Using the single button is easy as long as you read the instructions. I personally think this is a one to two person piece because of the relatively small chamber and battery capacity.
My biggest complaint is the draw speed, which does seem to improve after the first few uses. This also isn't so bad after you acknowledge the heater's power. The heater is 25 watts, which is on the low scale. That being said, if you take a slow enough hit, you will get massive clouds. I don't mean slow, I mean slooooooooow. For that "oh wow" hit, you need to puff it like a cigar, take a slow draw untill you feel some heat and that vaporyness, then catch your breath, then take a hit slow enough that it would take 25 to 30 seconds to take a full breath.
The problem comes from the fact that you will be out of breath by the time you finish your first hit.
The draw sense thing was a turn off for me at first, but I do appreciate it now. I now consider it requiring as much thought and effort as a button. Some preheating with a few puffs and a slow preheat draw and you're in business. Using the single button becomes intuitive after a few uses.
Battery life is moderate, but you can expect to drain it quickly while learning to use it. Charge time is 4-6 hours. I don't think this would be good for camping or hiking since there is no way to quickly replenish the power like swapping batteries or refilling butane. I strongly recommend butane for camping. For my daily drive, however, it works great.
It's great for a quick couple hits if you're in a hurry and you can still get blasted.
I don't think I would recommend sharing it with people who've never used a vape before. I have a hard time convincing people of liking vaporizers in general. Bag fill is the only success I've had and only because all the work is done for them by the time they get the bag. But I digress.
My final impression is that it is still a solid vape. It does everything I wanted in a vaporizer and I am glad I got it.
Size and efficiency are among the firewood's positives. The thing constantly gets mistaken for one of those mod boxes. A cop looked at me and didn't even think twice. At work, I leave it out charging on my desk and nobody notices; I do take the capsule and hide that, however. I can get great hits any time I want. The size makes it very portable.
I still consider the weaknesses being the draw speed and heater power: the big result being the learning curve. I do, consider the heater power irrelevant when you learn to hit the firewood properly. I also have, most certainly, noticed a drastic improvement in the draw speed as if the heater needed to be broken in. My best guess is the heat has changed the size and shape of the heater, which is its narrowest point.
Using the single button, there is also an option to go into the settings and raise the temperature ranges. If you don't think it's powerful enough, you can bump it up a few notches. Be careful as the firewood is very capable of combusting what you're trying to vape. Something to consider about such a little heater.