Ripstar
Well-Known Member
for sure! I am so glad it's sold out. This is a great vape. I will gladly pay full price for a new unit or 2 to be gifted
Firewood Vaporizer
- Thread starter Bouldorado
- Start date
Tombudster
Active Member
I messed up and didn't place the order fast enough yesterday. Sent them an email but never heard back.
Now to decide if I just get a Mighty while it's still on sale. I can't play the stock waiting game like I have been for GPU's, CPU's, gaming consoles, routers, and other computer parts this year - my heart can't take anymore
Now to decide if I just get a Mighty while it's still on sale. I can't play the stock waiting game like I have been for GPU's, CPU's, gaming consoles, routers, and other computer parts this year - my heart can't take anymore
SquirrelMaster
Well-Known Member
That's a tough call. I would wait as long as you can on the Mighty to see if Firewood emails you back but I feel you on the stock waiting game. I didn't even attempt to get a new GPU this year and I fluked out with my PS5. This year is complete and utter shit for many reasons but at least there are tons of new toys to keep us busy.
Tombudster
Active Member
That's the plan. Wait until the 30th and then pull the trigger. It's 100% my fault that I missed it. Dog wouldn't stop bugging me to take her out!
Vaporware
Well-Known Member
Even without the sale the Mighty is significantly more expensive, and while it has some advantages (like I hear you can’t really burn your material in the Mighty even with bad technique and it’s from a big company if you like that), I think the Firewood 7 has a lot more going for it.
Stock issues are partly due to the sale, and I think also due to it gaining some well earned attention here, on Reddit, etc. I suspect that if you miss it though, once the sale is over and he has time to produce some more it shouldn’t be too hard to get ahold of one.
Personally I would go for the FW7 right now even if the Mighty was cheaper. The replaceable battery, size, materials, cleaning requirements, and from what I’ve heard even performance are all things that make the FW7 much more appealing to me. I also prefer buying from small makers like Marc as long as they support their products well, and from what I’ve seen he does.
Ripstar
Well-Known Member
100% This vape is my go to if I want big clouds that don't bust my lungs. The build quality, oven, beauty and wpa/other options make it a top notch vape.Even without the sale the Mighty is significantly more expensive, and while it has some advantages (like I hear you can’t really burn your material in the Mighty even with bad technique and it’s from a big company if you like that), I think the Firewood 7 has a lot more going for it.
Stock issues are partly due to the sale, and I think also due to it gaining some well earned attention here, on Reddit, etc. I suspect that if you miss it though, once the sale is over and he has time to produce some more it shouldn’t be too hard to get ahold of one.
Personally I would go for the FW7 right now even if the Mighty was cheaper. The replaceable battery, size, materials, cleaning requirements, and from what I’ve heard even performance are all things that make the FW7 much more appealing to me. I also prefer buying from small makers like Marc as long as they support their products well, and from what I’ve seen he does.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Ripstar
Well-Known Member
shh, don't tell anyone!(sometimes the clouds can be so big that they do totally bust my lungs though)
Arawfish
Tree climber
Hello all, longtime lurker here. I heard about this vape about a month ago, did some looking around at other, similar units, but ultimately decided with the FW7. It got here a couple days ago and I’ve been putting it through it’s paces, getting used to it and such.
so far it’s proving to be an incredibly powerful unit, flavour is top notch. Very very happy I purchased when I did and didn’t wait for any sales. Seems they sold out pretty much the next day or two after I ordered mine. and I will be trying to snag one for my girlfriend before Christmas but that might have to wait depending on how quick Marc’s turn around are.
anyways, I love this little beauty. And I’m very glad I found this space.
so far it’s proving to be an incredibly powerful unit, flavour is top notch. Very very happy I purchased when I did and didn’t wait for any sales. Seems they sold out pretty much the next day or two after I ordered mine. and I will be trying to snag one for my girlfriend before Christmas but that might have to wait depending on how quick Marc’s turn around are.
anyways, I love this little beauty. And I’m very glad I found this space.
Do the temperature settings of the FW7 simply translate into a constant power output, or does the vape intelligently adjust the power to keep a constant temperature in a fool-proof way as long as you keep the button pressed?
If it's the latter, then it sounds like an on-demand Crafty+, which would make it very tempting...
If it's the latter, then it sounds like an on-demand Crafty+, which would make it very tempting...
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Do the temperature settings of the FW7 simply translate into a constant power output, or does the vape intelligently adjust the power to keep a constant temperature in a fool-proof way as long as you keep the button pressed?
If it's the latter, then it sounds like an on-demand Crafty+, which would make it very tempting...
I'm not sure I fully understand the question, but the FW7 is calibrated for a true temp control... Being on demand however, you could reach a higher end or lower end, of each temp setting, depending how you draw, use the button, and pack. The settings themselves, were calibrated down 30°, after the beta batch, based on the feedback here... And yes it is an instant on demand, ceramic chambered conduction vape, with a touch of hybrid convection too. So, you should already be tempted my dude!
What I mean is the difference between using a mod-based vape in Power mode (for example, 35 Watts) versus using it in TC mode (for example, 180 Celsius) or setting a Mighty/Crafty+ to 180 Celsius.I'm not sure I fully understand the question, but the FW7 is calibrated for a true temp control... Being on demand however, you could reach a higher end or lower end, of each temp setting, depending how you draw, use the button, and pack. The settings themselves, were calibrated down 30°, after the beta batch, based on the feedback here... And yes it is an instant on demand, ceramic chambered conduction vape, with a touch of hybrid convection too. So, you should already be tempted my dude!
Is the FW7 more like the latter (TC) after holding the button long enough for it to reach the set temperature? <-- I think this is what you're saying it does, which would make it very very interesting!
I guess even with a Mighty/Crafty+ it would also depend a bit on how hard you draw and how you pack, right? Like when you draw hard on them and the light turns red while it tries to heat back up to the set temp.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Yeah exactly, I would say it is different than both of those, perhaps best to think of it as somewhere in between? in my opinion it is pretty unique from anything else honestly!
I have been doing TC since fw3, i.e. I check and maintain a constant resistance at the heating element (resistance is a function of temperature so it is basically like checking the temp. I think this is how TC works in mod-based vapes too)
Tombudster
Active Member
I got mine! And a water pipe adapter to boot.
Anyone have any advice on where to get the 14 mm connection for the WPA?
Anyone have any advice on where to get the 14 mm connection for the WPA?
rvarick
Well-Known Member
Any 14mm Male to 10/14/18mm Male adapter should work, but here's the two I've been using if helpful (purchased from ebay):
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Yes indeed! Was able to pick up my second one finally, third times the charm! Along with green cooling stem (the purple inception I have coming from O'Connell is a little longer, and the smoked one from him is even longer than that, so I figured it was a good idea to get this green one for the color and to try one that can retract fully into the FW7)
@Shit Snacks Just to be sure, this is what you're talking about, right?
oconnellwoodworks.com
Good call on the green cooling stem, I love how it completely retracts into the device. Great for the pockets! Still working on a way to make it more mobile friendly, in terms of loading.
By working I mean doing absolutely nothing other than waiting for a genius idea to come to me or for one of you to post something genius.
Color Inception Cooling Stem (defective)
** Most stems have small cracks at a weld or two, others with chips and cracks on inner stem, and some the inner stem rattles. They will all work just fine, and from some tests it doesn't seem to affect the strength of the stem. Contact me if you have any breakages. You've seen our initial...
Good call on the green cooling stem, I love how it completely retracts into the device. Great for the pockets! Still working on a way to make it more mobile friendly, in terms of loading.
By working I mean doing absolutely nothing other than waiting for a genius idea to come to me or for one of you to post something genius.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
@Shit Snacks Just to be sure, this is what you're talking about, right?
Color Inception Cooling Stem (defective)
** Most stems have small cracks at a weld or two, others with chips and cracks on inner stem, and some the inner stem rattles. They will all work just fine, and from some tests it doesn't seem to affect the strength of the stem. Contact me if you have any breakages. You've seen our initial...
Good call on the green cooling stem, I love how it completely retracts into the device. Great for the pockets! Still working on a way to make it more mobile friendly, in terms of loading.
By working I mean doing absolutely nothing other than waiting for a genius idea to come to me or for one of you to post something genius.
Haha yeah I told you about the Rogue Wax Works shovel for loading already! Not sure how mobile that would really be though lol
And yes that is the right link, on the previous page or two here, someone posted their FW7 with a green one of those, which is why I had to have a purple one for myself! I got his longer plainer Dyna cooling stem in smoked glass too, because of the price, and for the free shipping altogether with debowler dish.
rvarick
Well-Known Member
This case works well. I'm pretty sure it's the one I have and use, but you may want to measure to be sure:
Hermitshell for Anker PowerCore-10000mAh-Portable-Charger
Last edited:
Traveler
Well-Known Member
Thanks!
rvarick
Well-Known Member
Quick tip for those using a colored OCWW Inception Stem with the FW7 (or really any dynavap-width stem) - if the small glass tube from Firewood doesn't fit tightly in the cooling stem, even after pushing the two pieces of silicone together more; you can use a couple Dynavap o-rings to get it to fit snugly (as shown in the picture below).
The inner diameter of my green inception stem was a *tiny* bit wide for a dynavap tip, etc. I realize they're handmade so they could vary ever so slightly, or I think my green one may be the first one OCWW made, so it could be that too (!)
The inner diameter of my green inception stem was a *tiny* bit wide for a dynavap tip, etc. I realize they're handmade so they could vary ever so slightly, or I think my green one may be the first one OCWW made, so it could be that too (!)
Last edited: