Ed's WoodScents Log Vape - Ed's TnT
- Thread starter Ed's TnT
- Start date
Good morning, gosh @Copacetic My man you are so right what kinda roll out would it be without hiccups, so not cool but hey has been a great lesson in electronics for me and one I am so going to remedy for you all very very soon. Geez for the beta testers I have heard from they have been using the same setup as you all received. After hearing so many reports of not getting the heat you all should I went to testing, I got the box of power supplies and went to work. I have found that the overall majority are so iffy in their performance that I got screwed on this batch of PS, I got them from a dealer from in China, kinda hard to find anything like this that doesnt come from there. Needless to say I wont be dealing with him again. Anyhow so last week I wanted to try some different PS, wanted to try a bump in amperage just to see what would come from that. Me being slammed and since all this PS heating issue from last night and after trying many of the 12/2A's I figured wth Ill give the 12/3 a go. I have tried this thing in various connection setups from PS-Temp Control-Rt. Ext.-WS and many other configurations. I am going to nip this heating problem in the bud right here and now.
You can see in the pic I have just wired the heater straight to the jack, have my temp probe wire tied to the heater and this is the WS heater with the 12/3 PS running from PS-Dimmer/Maxed-Extention-WS you can see for yourself, there will be no further issues of it not reaching temp. I like the supplier of these PS's and will be putting in an order for many as soon as I leave this post.
I will follow up more individually later, sorry yall I have so much to do, gotta get some work done in the shop, gotta go tell a couple of the boy bye son after lunch they are going on a church trip, gotta grab my oldest for some one on one time, we are going to my elderly neighbors first off to do some work on some lights they have that need ballasts swapped out, they are in their late 70-80's cant have them climbing a small step ladder, then he and I are going grocery shopping am getting us the biggest baddest looking steaks the market has and him and I are going to grill out just the two of us and hang tonight. Ohhhh and my girls rings should be here by noon so gotta be on the lookout for that most for sure!
Believe me the remedy is going to be a monster so get ready for a super duper heavy hitter headed yalls way, there is no doubt that you will have plenty of room to reach those high temps for trates and beware of most assuredly cause for combustion.
You can see in the pic I have just wired the heater straight to the jack, have my temp probe wire tied to the heater and this is the WS heater with the 12/3 PS running from PS-Dimmer/Maxed-Extention-WS you can see for yourself, there will be no further issues of it not reaching temp. I like the supplier of these PS's and will be putting in an order for many as soon as I leave this post.
I will follow up more individually later, sorry yall I have so much to do, gotta get some work done in the shop, gotta go tell a couple of the boy bye son after lunch they are going on a church trip, gotta grab my oldest for some one on one time, we are going to my elderly neighbors first off to do some work on some lights they have that need ballasts swapped out, they are in their late 70-80's cant have them climbing a small step ladder, then he and I are going grocery shopping am getting us the biggest baddest looking steaks the market has and him and I are going to grill out just the two of us and hang tonight. Ohhhh and my girls rings should be here by noon so gotta be on the lookout for that most for sure!
Believe me the remedy is going to be a monster so get ready for a super duper heavy hitter headed yalls way, there is no doubt that you will have plenty of room to reach those high temps for trates and beware of most assuredly cause for combustion.
starvingmusician24
Well-Known Member
So after playing with the wood scents for a bit I have to say using the dynavap paired with the wood scents is my favorite pairing so far. Huge smooth clouds that have flavor for days. 
Alright yall for an update, I have ordered a bunch of 12/3 power supplies, I have spoken to my heater manufacturer having asked about the upping amperage and was told that going up a bit is no problem that actually that well within its ability to handle that load and will not stress it at all in the long run. I even found a dealer for solid 12/3's that are CE cert. that will help with getting that approved for EU sales. I will say that at 5 on the dial the 12/3 runs 290-300 degrees giving you plenty of room for any situation all the time! These should go out to all and everyone Monday. Those of you that havent gotten your WS yet, dont sweat it if you dont get the results you had figured you would I assure you that you all will so get it next week!
@NickDlow All I can say is Wowzers!!!
@IAmKrazy2 Got ya bro, hopefully today or soon enough, as I said hang in there with me, you are going to so be happy with the monster I will be sending out to you also!
@SSVUN~YAH Hang in there to bro pls know I am all over this.
@sixstringsmash My wood guy sent me an email with that piece pic'd I immediately thought of @NickDlow gave him a shout and it was on, thats a beautiful slab of Amboyna Burl, had a couplethree voids in it I filled with epoxy then sanded the entire piece and hit it hard with many coat of poly to give it that shine, thats a sweet base for sure! That slab was a rare piece they come along every once in a while and believe me bro it isnt cheap but so worth it in the end. If you are interested I will keep an eye out for another piece just let me know.
@Copacetic I know right! Little Maggie got a one off Walnut, very nice I like the detail was trying something different when I was looking for a time out.
@Mr. Me2 I aint forgot about your PM bro, just been slammed working on a solution, will get to ya when things slow down a bit, bout to call it and go get my oldest for that time I mentioned above with him, going to be fun! You right @Ratchett does great work, really like the green contrast to the entire piece, well done Ratchet!
@Reflections Nicks like a Wood Baron, a sure nobleman!
@Squiby LOL!
@Vape Dr. Thanks bro, that is a fine piece, my first attempt at turning Buckeye was a learning process, that species is so soft it take quite a bit of time and finesse, glad you dig it bro, just wait til you get the 12/3 monster!
@Vapor_Eyes No doubt!
@little maggie You are right, I have sent you a PM and will have to get that back for repair, pls forgive me, a bump on the road to success, it aint easy its been awful tough but I will make it right and we will get there together! Yes maam that is lemongrass essence oil, thought it would be neat to send a bit to you all for use with the WS AromaCup.
@phattpiggie Great advise bro start to finish and thanks so much for stepping up and posting, you are the man!
@mephisto You to bro, thanks for the helping out!
@NickDlow Same to you also bro, pitching in and helping out!
@starvingmusician24 Wow bro, your kind words are like light at the end of the tunnel since yesterday, I am glad you are finding it to work well for you and thanks so much for lifting my spirits, am most grateful!
Oh now would you get a look at what just came in a bit a go, my girl is going to flip, looks even more beautiful than I had imagined!
Alright thats all I got, gotta shower and go get a kid!
@NickDlow All I can say is Wowzers!!!
@IAmKrazy2 Got ya bro, hopefully today or soon enough, as I said hang in there with me, you are going to so be happy with the monster I will be sending out to you also!
@SSVUN~YAH Hang in there to bro pls know I am all over this.
@sixstringsmash My wood guy sent me an email with that piece pic'd I immediately thought of @NickDlow gave him a shout and it was on, thats a beautiful slab of Amboyna Burl, had a couplethree voids in it I filled with epoxy then sanded the entire piece and hit it hard with many coat of poly to give it that shine, thats a sweet base for sure! That slab was a rare piece they come along every once in a while and believe me bro it isnt cheap but so worth it in the end. If you are interested I will keep an eye out for another piece just let me know.
@Copacetic I know right! Little Maggie got a one off Walnut, very nice I like the detail was trying something different when I was looking for a time out.
@Mr. Me2 I aint forgot about your PM bro, just been slammed working on a solution, will get to ya when things slow down a bit, bout to call it and go get my oldest for that time I mentioned above with him, going to be fun! You right @Ratchett does great work, really like the green contrast to the entire piece, well done Ratchet!
@Reflections Nicks like a Wood Baron, a sure nobleman!
@Squiby LOL!
@Vape Dr. Thanks bro, that is a fine piece, my first attempt at turning Buckeye was a learning process, that species is so soft it take quite a bit of time and finesse, glad you dig it bro, just wait til you get the 12/3 monster!
@Vapor_Eyes No doubt!
@little maggie You are right, I have sent you a PM and will have to get that back for repair, pls forgive me, a bump on the road to success, it aint easy its been awful tough but I will make it right and we will get there together! Yes maam that is lemongrass essence oil, thought it would be neat to send a bit to you all for use with the WS AromaCup.
@phattpiggie Great advise bro start to finish and thanks so much for stepping up and posting, you are the man!
@mephisto You to bro, thanks for the helping out!
@NickDlow Same to you also bro, pitching in and helping out!
@starvingmusician24 Wow bro, your kind words are like light at the end of the tunnel since yesterday, I am glad you are finding it to work well for you and thanks so much for lifting my spirits, am most grateful!
Oh now would you get a look at what just came in a bit a go, my girl is going to flip, looks even more beautiful than I had imagined!
Alright thats all I got, gotta shower and go get a kid!
Reflections
Well-Known Member
Stunning ring Ed!!! So are all the new Wood Scent pics..thanks all for sharing.
SSVUN~YAH
You Must Unlearn, What You Have Learned...
It has arrived!!!! At first I thought you sent me the blueprints Ed! It's love at first sight! Threw together some pics for you all, before I even heated up.
#getyasomeofthat!
Booty, booty, booty, booty rockin everywhere!
Even the base rocks!
I can see that we are going to be friends
I need an arsenal of these beautiful creations!
Thanks Ed!
#getyasomeofthat!
Booty, booty, booty, booty rockin everywhere!
I can see that we are going to be friends
I need an arsenal of these beautiful creations!
Thanks Ed!
Last edited:
IAmKrazy2
Darth Vapor
It has arrived!!!! At first I thought you sent me the blueprints Ed! It's love at first sight! Through together some pics for you all, before I even heated up.
#getyasomeofthat!
Booty, booty, booty, booty rockin everywhere!
Even the base rocks!
I can see that we are going to be friends
I need an arsenal of these beautiful creations!
Thanks Ed!
Beautiful. Congrats. What type of wood?
SSVUN~YAH
You Must Unlearn, What You Have Learned...
Thanks bro! It's Thuya Burl, such a beautiful creation!
sixstringsmash
Well-Known Member
It has arrived!!!! At first I thought you sent me the blueprints Ed! It's love at first sight! Through together some pics for you all, before I even heated up.
#getyasomeofthat!
Booty, booty, booty, booty rockin everywhere!
Even the base rocks!
I can see that we are going to be friends
I need an arsenal of these beautiful creations!
Thanks Ed!
That is some beautiful thuya! Do me a favor and take some nice hits out of it tonight for me! That looks wonderfully paired with the dynavap also, pure beauty.
I have the same exact issue Krazy. Said my package arrived at a post office on the 13th but hasn't had a single tracking update since then. My guess is the weathers delayed our stuff. I tried calling USPS this morning to get an update but don't expect anything if you do that. When I did that I was basically just told to stop being inpatient and that my stuff would come when it would come by some crazy lady who was speaking some dialect of jive.
Last edited:
starvingmusician24
Well-Known Member
@SSVUN~YAH those dynavap woodscents Rips tho am I right? Haha sweet log man even down to all the leather tooling.
Wow @SSVUN~YAH ! You've got a gorgeous unit! Thuya burl is stunning!
Yes, paired with you Vapcap, you're good to go!
Enjoy your WoodScents bro
Yes, paired with you Vapcap, you're good to go!
Enjoy your WoodScents bro
NickDlow
Log Hog
It has arrived!!!! At first I thought you sent me the blueprints Ed! It's love at first sight! Threw together some pics for you all, before I even heated up.
#getyasomeofthat!
Booty, booty, booty, booty rockin everywhere!
Even the base rocks!
I can see that we are going to be friends
I need an arsenal of these beautiful creations!
Thanks Ed!
Just WOW!
This ones for you buddy
http://i.imgur.com/PEE9HzD.jpg
Oh and BTW everyone, if you have any UD/Hi stems with the SS bushing that inserts into the core those can be replaced with VC tips for your WS/VC needs!!
Last edited:
SSVUN~YAH
You Must Unlearn, What You Have Learned...
Thanks! Hang in there, I can definitely tell you it's worth the wait!
That was a sweet surprise that I actually saw first when I unwrapped. Maybe I shouldn't have posted it? Hmmn.
Thanks! I think my next purchase is going to be a sweet tube for the VC, that I saw in Eds shop. That guy has skills too!Wow @SSVUN~YAH ! You've got a gorgeous unit! Thuya burl is stunning!
Yes, paired with you Vapcap, you're good to go!
Enjoy your WoodScents bro
Proper combination brother! Thank you for the heads up on the burl availability. Cheers!
It would fit in nicely on that beautiful mantle.
CarolKing
Singer of songs and a vapor connoisseur
I wanted to get an outside pic. We haven't seen much sun so I wanted to take a picture before it rained. It's such a pretty log vape this is also a Thuya Berl made by the one and only @Ed's TnT .
We are all thinking about your big day with your girl. That is a beautiful ring. Wishing you both a lifetime of happiness and wonderful memories.
We are all thinking about your big day with your girl. That is a beautiful ring. Wishing you both a lifetime of happiness and wonderful memories.
NickDlow
Log Hog
I wanted to get an outside pic. We haven't seen much sun so I wanted to take a picture before it rained. It's such a pretty log vape this is also a Thuya Berl made by the one and only @Ed's TnT .
We are all thinking about your big day with your girl. That is a beautiful ring. Wishing you both a lifetime of happiness and wonderful memories.
Beautiful!!!
I'm not sure if it's your preference but your Ti tip is on the wrong end of your 14mm stem. (The one on your WS in the pic)
It may not happen but there's less meat on that part and you may risk cracking the stem with the expansion of the Ti tip. Same goes for the 14/18 WonG. But your WonG is on the correct side.
Just my thoughts. But if that's your preference then keep goin with it.
IAmKrazy2
Darth Vapor
Right? All these pics and no talk of performance. How's it hitting ya'll?
starvingmusician24
Well-Known Member
Running at 12v at 10 on the dial and I get thick vapor in my tube. I'm one to admit I like a high temp vape and this thing does it. And using the TI tips I'm only using maybe .03 flakes it seems. And white wall every time. I'm a fan of the design of the aroma cup aswell. I like how it sits down on the heater secure. Haveing curious cats around the house this makes me feel secure using a aroma cup with a log. 
@SSVUN~YAH yea man I was a little jealous haha. I got a little on the bottom I was ready to see the bottoms of some of the others bro
@SSVUN~YAH yea man I was a little jealous haha. I got a little on the bottom I was ready to see the bottoms of some of the others bro
Jen
Well-Known Member
Thanks for the report! Looking forward to learning more about this one!Running at 12v at 10 on the dial and I get thick vapor in my tube. I'm one to admit I like a high temp vape and this thing does it. And using the TI tips I'm only using maybe .03 flakes it seems. And white wall every time. I'm a fan of the design of the aroma cup aswell. I like how it sits down on the heater secure. Haveing curious cats around the house this makes me feel secure using a aroma cup with a log.
@SSVUN~YAH yea man I was a little jealous haha. I got a little on the bottom I was ready to see the bottoms of some of the others bro