Yes it can. It has been known to produce large clouds for its small size. They also make an XL version which holds more herb resulting in larger hits.Can this device be a hard hitter?
Yes it can. It has been known to produce large clouds for its small size. They also make an XL version which holds more herb resulting in larger hits.
They both fill different niches/roles. I would say it can "hit" as hard, if not harder than a dynavap.Is it as effective as a dynavap?
Which is more likely to have technical issues?They both fill different niches/roles. I would say it can "hit" as hard, if not harder than a dynavap.
Hard to say. The Dynavap is almost foolproof due to using butane. Most issues would be user error.Which is more likely to have technical issues?
At home. Maybe I'll give the nano a try.DO YOU NEED SOMETHING TO TRAVEL WITH OR USE AT HOME MAINLY?
Hard to go wrong with that guarantee. Either way, you're doing the right thing by vaping your herbs.At home. Maybe I'll give the nano a try.
Yes, these things can absolutely put you on your buttCan this device be a hard hitter?
Magic9 touched on this but they're different experiences.Is it as effective as a dynavap?
I’ve only ever used mine through water, it’s just not worth it otherwise. I bought the ice stem too but it has sat unused for over a year haha.This thing really shines through water though.
My sweet spot with the enamo is through a j-hook. Prior, I used it through water or sometimes through a waterless bubbler. I get the best flavor, best ease of use and sufficient cooling through a j-hook. This is for a tiny load (0.03 - 0.05g) and a one-hit extraction.I’ve only ever used mine through water, it’s just not worth it otherwise. I bought the ice stem too but it has sat unused for over a year haha.
Are you saying the ice stem doesn't cool it well?I’ve only ever used mine through water, it’s just not worth it otherwise. I bought the ice stem too but it has sat unused for over a year haha.
Where could I get a decent j-hook to fit it?My sweet spot with the enamo is through a j-hook. Prior, I used it through water or sometimes through a waterless bubbler. I get the best flavor, best ease of use and sufficient cooling through a j-hook. This is for a tiny load (0.03 - 0.05g) and a one-hit extraction.
100% agree about the j-hook, nothing works better with the eNano, and I also use it as a one-hitter. Only problem is that you need fairly long draws and after about a year of daily use, I got the chronic back-of-throat tickle and had to discontinue dry vaping.My sweet spot with the enamo is through a j-hook. Prior, I used it through water or sometimes through a waterless bubbler. I get the best flavor, best ease of use and sufficient cooling through a j-hook. This is for a tiny load (0.03 - 0.05g) and a one-hit extraction.
Any 14mm female j-hook will work with the E-Nano WPA. I am using one from Elev8 from Vgoodiez. It's the only one I've ever used so can't compare it to others. But I was positively surprised by how well it cools.Where could I get a decent j-hook to fit it?
There’s a whole j-hook thread right here on FC, lot of good info in there.Where could I get a decent j-hook to fit it?
An observation on the Ice Stem. There was a fan on the board who kept their Ice Stem in the freezer till it was used and said it was effective and safe. I gave it a shot and can confirm It worked well for three or four smallish hits then it warmed up, and it was done cooling. I never went back for a second try because I didn't feel comfortable with hot metal heater covers and ice-cold borosilicate glass, though it should be fine.
J Hooks, are nice (2nd the ELEV8) and it's one of my most used glasses pieces that isn't a straight stem, but for the Nano the long adjustable screen is my fave.
Once you get it back up and running, you might want to get one of these to save some stress on your socket. Keeps me from damaging the cords on my nanos as well.So not long after the socket on my E-Nano broke and I went back to the older backup E-Nano (that already had as much usage before I got the newer one), the old backup one is now broken too. I guess after so much time of the socketless cord being bent back and forth at the point of ENano entrance, the wiring inside the cord got damaged, and bending the cord now cuts away the power. I unplugged it so any possible sparks inside the cord won|t melt it. I guess to repair this I'm gonna need to disconnect the cord from the two 3-junctions it's attached to inside the vape body, then cut the damaged part, then skin the wire again and reconnect it.
I opened it but the caps on these 3-junctions just refuse to get off, how much force does it need? do I need to break the caps it to access the junctions? I don't want to break them as then I'd need to figure out some replacement for them. (although I think a simple electrical tape should do the trick as well.)
I think the socket on my newer Nano (the one in the link that broke not long ago) broke after one of the falls and this might be even worse for floor impacts.Once you get it back up and running, you might want to get one of these to save some stress on your socket. Keeps me from damaging the cords on my nanos as well.
YEKELLA IEC320 C7 to C8 Right Angle AC Adapter, IEC 320 C7-C8 90 Degree Vertical Left Right Angle Power Adapter, Figure 8 Male to Female Angle AC Converter, https://www.amazon.com/dp/B07D13VN31/ref=cm_sw_r_cp_api_i_87BQY5FBFFHFP02TDF3Z?_encoding=UTF8&psc=1
Yeah, def worse for floor impacts, hadn’t thought about that. Mine stay on the desktop, so no big falls have happened so far.So I cut off the crimp caps, I did not have any new ones, so I used a screw-in junction instead. It lacked the metal lining inside, so the screw could not be tightened very tightly, but I coiled the lightbulb and ceramic wires around the power wire and so far it seem to work after I put it all back together, no smoke coming off the junction, the ceramic heats, the lightbulb shines, and bending the cable near the vape entrace is no longer cutting the power off. And it vapes. So the reapir went good enough, although more shoddy that the original caps, it works.
I think the socket on my newer Nano (the one in the link that broke not long ago) broke after one of the falls and this might be even worse for floor impacts.
The old Nano that broke today doesn't have a socket, if I got the same problem with a socket a simple whole dimmer replacement would fix it. But because it was socketless I have to disrad the broken piece of cable and rewire the entire insides of the vape (just two 3-junctions, but very little space).
I hope this won't interfere with my prepaid 500 unit order I made? No really I did, OK never mind.Just a quick FYI -
Our payment gateway is having issues that will be resolved Monday. In the meantime please feel free to try once more with code SQUARE for free domestic shipping. I will send you an invoice for payment via Square once we receive the order so make sure to check spam/ junk folders as well.
Thanks!