Gnome34

Well-Known Member
Epic has shipped replacements for my defective glass stems! Excellent customer support. Still loving this vape.

Been a lazy mellow saturday with an indica strain called Grandpa's Stash. Really decent strain for the price.

I have found I have to swap out the metal screens about every day to every two days. They clog quickly but are super easy to clean and swap so no biggie. I've been using a tooth pick on the all glass stems to unclog the holes between bowls. Still have not settled on which I prefer. I like them both I think!
 

howie105

Well-Known Member
I use a stick to push the wire screen to the end of the stem and clean it without removing it because I suck at getting screens back into the stems. Bonus, I have used the same screen for about a year, I bought replacements during last years 420 sale and still have all but one of them.
 

scooterboy

Muppet, not moped.
Enjoyed a side benefit of the e-nano this morning - hot cocoa made with stem milk. :smug:

I usually let 3 stems build up before I make stem milk with them, but I've been lazy and this time I had 4. And they were all well beyond "speckled" (you all know what I mean). So I'm feeling quite buoyant at this point.

About to go on a chore spree. I can be very productive after cocoa.
 

ataxian

PALE BLUE DOT
Enjoyed a side benefit of the e-nano this morning - hot cocoa made with stem milk. :smug:

I usually let 3 stems build up before I make stem milk with them, but I've been lazy and this time I had 4. And they were all well beyond "speckled" (you all know what I mean). So I'm feeling quite buoyant at this point.

About to go on a chore spree. I can be very productive after cocoa.
Hot Cocoa is very mild?
LEMON HAZE in a NANO is more satisfying if you like CANNABIS?
 

scooterboy

Muppet, not moped.
Enjoyed a side benefit of the e-nano this morning - hot cocoa made with stem milk. :smug:

I usually let 3 stems build up before I make stem milk with them, but I've been lazy and this time I had 4. And they were all well beyond "speckled" (you all know what I mean). So I'm feeling quite buoyant at this point.

About to go on a chore spree. I can be very productive after cocoa.
Well that was a lesson learned. 3 stems = GOOD. 4 stems = BAD.

Not long after making the above post I started my chores and pretty quickly got a bad case of vertigo and had to lay down. After laying down for a bit I'd feel better and get up, only to get hit with the vertigo again. I spent much of the day in bed.

Don't forget, kids - just because "some" is a good thing, "more" isn't necessarily better! :)
 

ataxian

PALE BLUE DOT
Well that was a lesson learned. 3 stems = GOOD. 4 stems = BAD.

Not long after making the above post I started my chores and pretty quickly got a bad case of vertigo and had to lay down. After laying down for a bit I'd feel better and get up, only to get hit with the vertigo again. I spent much of the day in bed.

Don't forget, kids - just because "some" is a good thing, "more" isn't necessarily better! :)
I was born 1958 and was protected from the HIPPIE CULTURE however growing outside was cheap and easy?
Sorry to be outdated?
Smoked joint’s and loved ART and SURFING let us not forget SKATEBOARD’s?
The NANOTECHNOLOGY was appealing due to the WOOD work I love and by a bud tender just outside of the Bubble?
Some scientist’s writer’s are either followed or loathed?
The same for all I believe?
Not crazy just stoned, high or medicated! (LEMON HAZE is DAKINE I have)?
 
Last edited:

entirely_foreign

Well-Known Member
Hey guys, planning on getting an e-nano soon. For me, a WPA is a must. Any other must have accessories? I know for a woodscents some people like to get a VVPS, not sure if that applies here (I'm guessing not, since AC).
 

Exsmoker

Plant Manager
Hey guys, planning on getting an e-nano soon. For me, a WPA is a must. Any other must have accessories? I know for a woodscents some people like to get a VVPS, not sure if that applies here (I'm guessing not, since AC).

Maybe some extra screens, and the stand comes in handy too. I have the long adjustable stem but mostly run mine thru water, so it doesn't get used much. Have fun!
 

hoptimum

Well-Known Member
Hey guys, planning on getting an e-nano soon. For me, a WPA is a must. Any other must have accessories? I know for a woodscents some people like to get a VVPS, not sure if that applies here (I'm guessing not, since AC).

no need for a VVPS, the nano has a dimmer. I like the eNano cooling stem and a glass JHook for dry hits. I’ve tried multiple WPAs, including inverting on a bubbler and hydro tubes. My current favorite is a Pinnacle water tube. Just a very small amount will deliver a couple potent hits. It’s 14mm.
 

howie105

Well-Known Member
Hey guys, planning on getting an e-nano soon. For me, a WPA is a must. Any other must have accessories? I know for a woodscents some people like to get a VVPS, not sure if that applies here (I'm guessing not, since AC).

I seldom vary the power setting on my Nano but I do vary the draw and I can see the appeal of a PID type controller.
 

Alex03

Well-Known Member
Hello fellow Vape enthusiasts,

long time E-Nano lover here. I want to ask you guys to help me out. I have 3 three Nanos and on two of them the connection/power plug where the power cord meets the Nano has broken:rant:.
Can some one please tell where I can find replacement parts for those broken connections.
I do remember there were some posts in this thread detailing the same problem and even showing Diy repairs from some of our members here on FC. But for the life of me I can´t find these posts in the E-Nano thread.
Your help would be greatly appreciated.

Have a nice day and a relaxed weekend every one.
 

vinnyzan

Well-Known Member
Hello fellow Vape enthusiasts,

long time E-Nano lover here. I want to ask you guys to help me out. I have 3 three Nanos and on two of them the connection/power plug where the power cord meets the Nano has broken:rant:.
Can some one please tell where I can find replacement parts for those broken connections.
I do remember there were some posts in this thread detailing the same problem and even showing Diy repairs from some of our members here on FC. But for the life of me I can´t find these posts in the E-Nano thread.
Your help would be greatly appreciated.

Have a nice day and a relaxed weekend every one.
Have the same problem with mine, cant seem to get any one from epic to respond to my emails about getting it fixed. Not sure if its because their not doing repairs with whats going on or not. Luckily like you I also have more then one.

I remember some one fixed the same issue a few weeks ago and posted a picture
Edit* go to page 931
 
Last edited:

BabyFacedFinster

Anything worth doing, is worth overdoing.
Have the same problem with mine, cant seem to get any one from epic to respond to my emails about getting it fixed. Not sure if its because their not doing repairs with whats going on or not. Luckily like you I also have more then one.

I remember some one fixed the same issue a few weeks ago and posted a picture
Edit* go to page 931

Consider giving them a call at (866) 898-0512
 

Exsmoker

Plant Manager
Can some one please tell where I can find replacement parts for those broken connections.

The socket that the cord plugs into is called a C8 panel mount power socket, similar to this. They're cheap plastic, so I guess that's why they sometimes break. If all else fails, they're not difficult to replace.

I think the cord / connector is the biggest shortcoming of the nano. After replacing the entire cord and the connectors on my older unit with a thinner, flexible round cord and XT connectors, I really found it to be a huge improvement and a more enjoyable experience.

 

ACE OF VAPE

Vape outside the box
Manufacturer
We
Hello fellow Vape enthusiasts,

long time E-Nano lover here. I want to ask you guys to help me out. I have 3 three Nanos and on two of them the connection/power plug where the power cord meets the Nano has broken:rant:.
Can some one please tell where I can find replacement parts for those broken connections.
I do remember there were some posts in this thread detailing the same problem and even showing Diy repairs from some of our members here on FC. But for the life of me I can´t find these posts in the E-Nano thread.
Your help would be greatly appreciated.

Have a nice day and a relaxed weekend every one.
We’ve been having all kinds of tech problems in he last two weeks from email channel being down to bank not letting us process orders on the website. Nadia is working hard on these issues despite being pregnant(again).Anyone with a plug issue can contact customerservice@epicvape.com to get an RMA and we’ll are care of it.
 

ataxian

PALE BLUE DOT
Hey guys, planning on getting an e-nano soon. For me, a WPA is a must. Any other must have accessories? I know for a woodscents some people like to get a VVPS, not sure if that applies here (I'm guessing not, since AC).
I like a 18mm GonG for some of my water pieces.
If 14mm is your go to then get that as well.

the NANO is very simple and a doable way to enjoy CANNABIS.

The customer service is very effective and efficient if that is important to your purchase of the NANO?

@Exsmoker I have a WALNUT NANO however your NANO in MAPLE look’s really AWESOME!
 
Last edited:

howie105

Well-Known Member
Anyone else have an enano rattle? Im going to email epicvape about it but thought I would check with you guys as well the rattle is coming from the ceramic heater which is rattling against the SS tube.

If I strike it with enough force to cause the heater to move in the tube it will but that usually only happens when I am cleaning the unit or I drop it. On the upside it has been that way for years and performance hasn't changed.
 
Hi, I’ve lurked here for a while but this is my first post. I decided to purchase a desktop vape recently as I currently only have a portable, so I did some research and the E-nano seemed like a good fit. I tried to buy from Epic Vapes website but it seems they are having technical problems, so I was able to find one from a Canadian 3rd-party vendor, The Herb Cafe, and have it shipped to me in the United States. I got it and plugged it in, but it doesn’t heat up and the LED light doesn’t turn on. I called The Herb Cafe (will just refer to them as THC from this point on), and the guy on the phone said that they’ve had some problems with a batch that came with faulty cords. He’s trying to contact Epic Vapes to ship me a replacement directly. In the meantime I’ve been reading about how you can use another cord to test if it works, even though the other cord won’t have the dimmer to regulate the temperature, so I plugged in my PS4 cord and it’s still not turning on. I called back THC and the (very friendly & helpful) guy on the phone said that he’s almost positive it’s the cord, and he said some technical stuff that I didn’t really understand (something to do with modulators).

Can anyone offer any insight? Even Epic Vape’s own website suggests testing the unit with a generic cord to see if the problem is with the cord or with the unit itself. I’m really frustrated and I’m worried that the unit itself is broken. I don’t know how I’d go about getting a replacement since the Epic Vape website appears to be broken and every other vendor seems to be out of stock (I bought the very last unit in stock at THC). At this point I’m just tired and wondering if I made the right choice when I decided to go with the E-nano. However, it seems like most people have had good experiences with them, so maybe I just have crappy luck.
 
Top Bottom