Vapodudule

Well-Known Member
Hi folks,

I chained this beast to my stepper and i come to kiss him all day long. This device is so efficient that my poor tolerance became so high. I feel also wasting some much goods by extracting so much.

I blasted my loads by 7,5-8 may be 8,5 by rainy weather. The smoothness of a J-hook hits make me exhale some "plumes" of vapor as vito said. Taste insane, dose insane.

I explore now the low temps hits by 7 and may be below.

Eventually the analysis is simple as the e-nano, brings heat to vegetal loads requires simply a basic ceramic heater cleverly encapsulated.

For the e-nano Hip hip hurray!
 

llamaman001

Well-Known Member
Just got the email letting me know its been shipped!!! Im probably as excited for this vape as I was when I first ordered my cloud!

Cant wait for that nice 2-3 min warmup time (I know you should wait longer to get denser vapor).

Its going to be hilarious showing this off to my buddys. The only vaporizers they have to relate to are my cloud or the SSV. When they see this little piece of wood giving off clouds just like the vapxhale they are going to trip out. Ill try to get a vid if I can.
 

Dafni

Well-Known Member
Try really skimpy loads. I often will put barely 1/8 of an inch (maybe a half of a centimeter) in the gong or stem, and get an amazing amount of vapor/medication.


That's so true. I get great results from very small loads. My stash last me so much longer since I got the nano, it's almost unbelievable. And that's me coming from other vapes, not coming from combustion.
 

Enchantre

Oil Painter
This evening, my dear, dear hubby, broke my Gong.

We flew to the LHS and got a gong-ish solution. nope. Now I have a stem in my bubbler, so the Nano is high-flying its way when I hit it.

I just ordered TWO replacements from EpicVape.
 
Enchantre,
  • Like
Reactions: Vitolo

Hoops

Well-Known Member
In a pinch, the direct draw stems work well through glass with some silicone tubing on the end. May need to fold the silicone back onto itself a few times to complete a seal on 18mm, but 14mm is just a single fold, if that.
 

Enchantre

Oil Painter
It's working without the help... my bubbler has a vertical joint, so the stem is just sitting straight in it.

Wobbles, though. I ordered my replacements.
 

VaPeD&CoNfUsEd

JoDa Glassworks
Glass Blower
I want to order the all glass 14mm gong because trying to keep the screen in my standard 14 gong is about impossible. Any tips?
 
VaPeD&CoNfUsEd,

ataxian

PALE BLUE DOT
I want to order the all glass 14mm gong because trying to keep the screen in my standard 14 gong is about impossible. Any tips?
One of my vaporizer is dead? (Think it might be the PA?)
So being the lazy sluggard that I am I grabbed the DRY STEM for the NANO.
Loaded up Flower Nuggets (Whole no grind) of WHITE WIDOW crossed with OG.

OMG = Flavor/Effect!

My water pipes (GonGs) get a rest this week-end.

This will be my program!

Quick easy no fuss!

Are we not Men?
We are NANO!
 

z9

Well-Known Member
I want to order the all glass 14mm gong because trying to keep the screen in my standard 14 gong is about impossible. Any tips?

Fuck with it as little as possible while you wait for your gong with the glass screen to arrive. There's no winning with the standard gong/stem. Don't get me wrong they work, they just aren't as easy to work with as the ones with a glass screen especially if you like to stir a lot.
 

xer0

Well-Known Member
I started using glass flower screens in my GonG. I don't like the honey comb screen as it clogs up too easily IMO. I have some of the loose 3/8" honey comb screens that are the same way so I think that design is just not for me.

With the glass flowers I have been getting a very even vape. If the grind is too fine and I stir a lot I lose a little but overall it does a good job.
 
xer0,
  • Like
Reactions: ataxian

VaPeD&CoNfUsEd

JoDa Glassworks
Glass Blower
@Vitolo ordered a walnut e-nano tonight. Have been on the fence about which log vape to get after saving up for almost a year. I trust you, and after reading how much you like yours. I went for the e-nano. :tup:
Excellent choice! Mine is also the walnut and it's beautiful. I was a complete log virgin until I got my enano, now I can't imagine using anything else!
 

ataxian

PALE BLUE DOT
I started using glass flower screens in my GonG. I don't like the honey comb screen as it clogs up too easily IMO. I have some of the loose 3/8" honey comb screens that are the same way so I think that design is just not for me.

With the glass flowers I have been getting a very even vape. If the grind is too fine and I stir a lot I lose a little but overall it does a good job.
I love the GLASS Honeycomb screens.
Put the Stainless steel screen first then the Honeycomb for a full benefit!
For grind this is what I do.
Normally I don't use screens.
Just load whole flower nuggets.
Leave them fluffy!
I use DAISY screens as well.
 
ataxian,

llamaman001

Well-Known Member
Alright guys, my E-nano is officially in the house! Set to 6.5 instantly, set for 2 min then started ripping. not much cloud production at first but as time went on I started blowing some nice vapors. This is a tiny little beast, but it is just that, a BEAST. I ordered it with the 14mm gong and the normal straight tube it came with and I love both. I just got finished with a 14mm load on 8 and it was really really nice. I am blown away by everything and the quality is excellent. I was worried the stems might be thinner style glass but now that Im handling them Im sure they will survive my usage with them, a lot thicker than I originally had thought. The airflow might not be there but as of right now I feel more comfortable holding this than my cloud.

Ill be back with a more in depth review once I stop experimenting. Excuse the randomness of my posts as well....its already taking its toll on me.
 

VaPeD&CoNfUsEd

JoDa Glassworks
Glass Blower
Alright guys, my E-nano is officially in the house! Set to 6.5 instantly, set for 2 min then started ripping. not much cloud production at first but as time went on I started blowing some nice vapors. This is a tiny little beast, but it is just that, a BEAST. I ordered it with the 14mm gong and the normal straight tube it came with and I love both. I just got finished with a 14mm load on 8 and it was really really nice. I am blown away by everything and the quality is excellent. I was worried the stems might be thinner style glass but now that Im handling them Im sure they will survive my usage with them, a lot thicker than I originally had thought. The airflow might not be there but as of right now I feel more comfortable holding this than my cloud.

Ill be back with a more in depth review once I stop experimenting. Excuse the randomness of my posts as well....its already taking its toll on me.
I like mine at 6.5-7 dry and 8-8.5 through water depending on strain.
 
Top Bottom