VoidOfCourse
Well-Known Member
All systems go. Warming up to 7 for some tasty clouds tonight.
Cheers, friends. (:
Cheers, friends. (:
E-Nano from Epickai
ataxian
PALE BLUE DOT
Carl is so funny!New to FC. So do y'all just learn to live with the crack? I've already sent it in for repair once for this
Also I don't get the whole photo upload thing...
Your avatar resonates with me!
NANO is small however functional + it’s pretty!
New to FC. So do y'all just learn to live with the crack? I've already sent it in for repair once for this
Also I don't get the whole photo upload thing...
Hey! Email me, I will help you out and make it easy for you! customerservice@epicvape.com
Driver 8
Well-Known Member
I just realised I didn't upload this here .
I Love me new 2nd hand nano that much. I built a stand for it outa salvaged wood
Not 100% finished yet . Caught me some lazy bone .
Beautiful stand. Nice work.
Gray Area
Well-Known Member
It's black anodised aluminium...
Logic
Old Skool Member ‘10
Thanks for clarifying. I like the thought of that much more than a plastic part...
higher quality.
Summer
Long Island, NY
@snappypappy419, as imgur doesn't function correctly on FC anymore, use postimage.org, imgbb.com,tinypic.com or any pic hosting service of your choosing. My votes for postimage.org because it's super easy to use & you can upload multiple pics at one time. Directions on how-to is in the 2nd link below.
http://fuckcombustion.com/threads/please-stop-using-imgur.33374/
http://fuckcombustion.com/threads/how-to-post-pics-using-postimage-org.34584/
http://fuckcombustion.com/threads/the-sandbox-make-test-posts-here.13650/
http://fuckcombustion.com/threads/please-stop-using-imgur.33374/
http://fuckcombustion.com/threads/how-to-post-pics-using-postimage-org.34584/
http://fuckcombustion.com/threads/the-sandbox-make-test-posts-here.13650/
ataxian
PALE BLUE DOT
I like the soft edges!I just realised I didn't upload this here .
I Love me new 2nd hand nano that much. I built a stand for it outa salvaged wood
Not 100% finished yet . Caught me some lazy bone .
NANOTECHNOLOGY = NANO
Poostuff
Please delete
I’ve been without my nano for over 12 months now.
The heater dropped right down into the shaft, it heats up but even on 10 it doesn’t produce much vapour.
I paid $50 shipping for the RMA & got it after after 30 days.
It came back with a new cord & email saying the heater was replaced, but it looked exactly the same.
I emailed again about the heater issue & Nadia assured me it was ok, the heater had been replaced & I needed another inverter.
I tried to explain I can clearly see the heater is still in the wrong spot.
In the end she agreed to a refund after I asked, but I have to pay another $50 to ship it back.
I’ve asked for a shipping label many times & just haven’t heard back from her.
Really disappointed so i eventually gave up, but I like the nano so much that I bought another from Puffitup.
Nice to be using one again after all this time because it’s a really great vaporiser, but so disappointed with the service of my lifetime warranty OG nano.
The heater dropped right down into the shaft, it heats up but even on 10 it doesn’t produce much vapour.
I paid $50 shipping for the RMA & got it after after 30 days.
It came back with a new cord & email saying the heater was replaced, but it looked exactly the same.
I emailed again about the heater issue & Nadia assured me it was ok, the heater had been replaced & I needed another inverter.
I tried to explain I can clearly see the heater is still in the wrong spot.
In the end she agreed to a refund after I asked, but I have to pay another $50 to ship it back.
I’ve asked for a shipping label many times & just haven’t heard back from her.
Really disappointed so i eventually gave up, but I like the nano so much that I bought another from Puffitup.
Nice to be using one again after all this time because it’s a really great vaporiser, but so disappointed with the service of my lifetime warranty OG nano.
UnevenPizza
I dream of Pizza
I just realised I didn't upload this here .
I Love me new 2nd hand nano that much. I built a stand for it outa salvaged wood
Not 100% finished yet . Caught me some lazy bone .
That's beautiful! Very inspiring.
That's a bummer @Poostuff
Maybe @nadia_epic or @epic_arii can clarify? I hope you enjoy your new nano though. It's the best vape IMO.
I had a bit of a "bad time" due to too much and too strong stem milk.
Luckily it was a four day weekend, because I needed 3 days to recover
I think it was because I used an old 14mm nano-gong that was pretty dark, probably because it was used mainly for hash (i didn't realize this untill it was too late :S)
In my haze I managed to drop my Ice stem AFTER cleaning it meticulously for several minutes. Sadly the mouth-end chipped and I'm not sure I want to continue using it.
Will have to order another one eventually but I'm gonna wait until I order more though because of shipping costs.
scooterboy
Muppet, not moped.
Could you not sand/polish the chip so it's free of any sharp edges?
Baron23
Well-Known Member
Did you send them pictures of the post RMA issue with the heater position? I have found Epic to be pretty good about CS so I'm a little surprised at your exerience.
@epic_arii @nadia_epic
snappypappy4119
New Member
Forgot my password for the other account, but here's the crack I'm talking about. I got it fixed a few months ago and it cracked again within like 2 weeks lol. I say put the heat between 6-8.3
I actually witnessed it happen the second time. There was a spark and a loud pop, and bam, I've got this bad boy
Sidenote, I'm just wondering. What do y'all use as a portable? I've got a 3 year old Flowermate mini that needs a good upgradin'
I actually witnessed it happen the second time. There was a spark and a loud pop, and bam, I've got this bad boy
Sidenote, I'm just wondering. What do y'all use as a portable? I've got a 3 year old Flowermate mini that needs a good upgradin'
Last edited by a moderator:
BabyFacedFinster
Anything worth doing, is worth overdoing.
Forgot my password for the other account, but here's the crack I'm talking about. I got it fixed a few months ago and it cracked again within like 2 weeks lol. I say put the heat between 6-8.3
I actually witnessed it happen the second time. There was a spark and a loud pop, and bam, I've got this bad boy
Just curious as to what caused that ring of wear around the top of the nano? Never seen that before. Sorry to hear about the second crack, although with what looks like cherry wood, it kind of has a cool rugged look to it.
On another note, my ice stem arrived today and I was most excited. I checked the tracking number when I got home and learned that it was sitting in my mailbox.
This is what I can tell you so far. The glass is very thick and a nice quality. It is a fixed screen which is usually not my choice but I'll work with it. I typically load rosin wrapped in some cotton. The fixed screen isn't that deep so the heater touches the cotton.
The first hit melted the rosin and I mixed the cotton around with a toothpick. With the second hit, I was wondering if I was getting anything as I didn't notice if vapor was passing though. Upon the exhale, I blew a massive cloud that put me on the couch, and I haven't been able to test anymore.
That was one smooth hit.
snappypappy4119
New Member
It cracked once and when I sent it in to get fixed it came back like that. I think when they repair it, they cut the center piece out and then slide it into a new uncracked piece. At least that's what it looks like
beiberhole69
Sexual Maven
Well, to update this. EpicVape is sending me a new screen for the heating element.
Hopefully it's not too difficult to remove the old and install the new. Though I usually put my nano away for the summer.
scooterboy
Muppet, not moped.
Strange - I understand each of those words, just not in that order.
snappypappy4119
New Member
Do you find that Enano produces thicker clouds through the dry stem vs through water?
I've had mine for almost 3 years and finally got a bubbler maybe a month ago, and I've been exclusively using it through water since then
Tonight, I tried it with the fixed glass dry stem and it was such a nice change of pace. It takes a few more hits to clear a bowl, but the flavor is so great dry at like 6.3 and I feel like I was just blowing massive clouds
I've had mine for almost 3 years and finally got a bubbler maybe a month ago, and I've been exclusively using it through water since then
Tonight, I tried it with the fixed glass dry stem and it was such a nice change of pace. It takes a few more hits to clear a bowl, but the flavor is so great dry at like 6.3 and I feel like I was just blowing massive clouds
yeswecann
Well-Known Member
https://www.amazon.com/Stash-Jar-Co...ds=stash+jar&qid=1560308773&s=gateway&sr=8-14
Small mason jar or miron uv glass?
Is exhaling into it a chore? Like the opposite of a tight draw?I also prefer the Junior. Recently I was talking about smoke buddies and my friend said the Junior sucks because it doesn’t last as long. He’s a smoker. My Junior is over two years old and still kicking. I’ve even used it when accidentally combusting with other vapes. The key is to leave the cap on when not using it. I’ve been a legal medical user for a while now so I don’t need to use the Smoke Buddy often but sometimes the extra discretion is nice...
As far as my E-Nano goes lately I’ve been using it with Girl Scout Cookies flowers for the most part. This strain requires a change from my usual temp of 6.614159 up to 6.714159. The color of the ABV at the end is the same as it usually is at the lower temps. It’s funny how that works with different strains.
As the immortal @ataxian has so eloquently stated, the nano is just the heater, the herb is the holy grail. But what a heater the nano is, it performs wonderfully. Peace to @ACE OF VAPE, @nadia_epic, @epic_arii, and everyone else out there in the nano nation. Much love!
Last edited by a moderator:
Teaturtle
Active Member
RIP my Nano it seems. Same problem I had earlier this year started happening, where the light comes on randomly depending on the position of the Nano. It's growing harder to keep the light on and I've followed the repair video's advice on tightening the innards.
Not sure what sets it off. The first time this happened experts repaired it and sent it back with a new cord that, despite being off the mark (3 is equivalent to 1 for example), worked great, but only for a short while. Now it's happening again, dunno if it's the cord or device
Not sure what sets it off. The first time this happened experts repaired it and sent it back with a new cord that, despite being off the mark (3 is equivalent to 1 for example), worked great, but only for a short while. Now it's happening again, dunno if it's the cord or device
yeswecann
Well-Known Member
I feel like that's kinda my end game set up, i.e., Sky Glass Starter Rig, Exotic e-Nano and a cooling stem. Currently on my first vape, a 2019 M (replaced tip) with Pipe's Caldron. Have Ed's WPA and a Hemper Turbine 5" rig. It's a nice little setup and vey functional, but I hate the high draw resistance on the Dynavap through water. Oh, and I just had to get a gold Brilliant Cut w/fine plate. Such a great grinder.Hello everyone. I'm in the "process" of moving and spent the last year fixing up my house to make it better for prospective buyers (wood floors, new kitchen, fixing leaks and such) and have been reading but not posting. It's much easier to lurk. Plus, I'm sure no one wants to see my stoned rantings...
This is a status report. The E-Nano is still the best unit I have ever used. I gave my Mighty away last week, after realizing I put it in a drawer when I got my E-Nano and never used it again. Some neighbors got a medical card and bought a ton of flower, but realized they did not want to smoke, so naturally they needed something easy to use and the Mighty fit the bill. I don't miss it either. Also dumped my mason jar bong for a Sky Starter Rig from Sky Glass. That's also a quality piece. It has a smooth and nearly effortless draw, and the exhale produces a cloud.
I'm about to buy the new ice stem to give that a shot. I love using the Nano through water and I also noticed something kind of neat. When I got my new glass, I was able to effectively pull through it super well and then cut my dose in half to .04 grams. At that dose most sativas feel wonderful.
For house showings I put the glass away, but left the E-Nano in plain sight with the aromatherapy cup and some lavender oil inside. No one suspected anything!
Which downstem style did you get on your Sky: 6-Slit Diffused, Open Tubing or Showerhead?
Straight janky that one!
fsky
DIY concept I'm working on. Break the tea ball in two. Insert spherical surface facing in…
I will invest in a "real" smokebuddy soon, I made a DIY one out of some old tube, but I think there's still too much air-resistance and not enough smell removal
https://www.amazon.com/gp/product/B002YGGR8W/ref=ox_sc_act_title_1?smid=ATVPDKIKX0DER&psc=1
https://www.amazon.com/gp/product/B0002566WY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B014KJ5WLI/ref=ox_sc_act_title_4?smid=A18J2D68FG1DQ0&psc=1
Last edited by a moderator: