E-Nano from Epickai
Driver 8
Well-Known Member
That's cool, seems a lot like what I was thinking. Definitely feasible for the Nano.
Did this Flashevap ever get off the ground?
blokenoname
DIY Log Dabbler 😁🪵💪💨💨💨
Sure
But this was back in the mid 90's already, as the original Flash Evaporator is the grand grand daddy of the Nano and other contemporary log vaporizers, springing from the mind of Bob Burruss, together with the later Eterra, Pneuma and the New Flash Evaporator he built, and who also held the original 'Health Pipe' patent back in '79.
https://patentimages.storage.googleapis.com/40/89/0b/3a0fe9264950af/US4141369.pdf
Vapeur Rogue
Est. 2013- Never Lookin' Back
When I click the Exotic Wood Kit link it bings up the wood choices of Fiddleback or Crotch walnut, or Male Burl.
https://epicvape.com/product/e-nano-exotic-wood-kit/#configuration
Blargas541
Well-Known Member
Thanks, I guess they must have updated it since I last checked a few days ago. Should've checked again before I posted, my bad!
The woods look gorgeous, so hard to decide what to get. Anyone know what type of wood the white and orange stripey one pictured on the deluxe e nano kit link is https://epicvape.com/product/e-nano-deluxe-standard-wood-kit/#wood-choice? It doesn't appear to come up when I pick the deluxe or exotic kit options, but damn it looks beautiful. Is it available for sale?
edit: 1 more question, are there exotic wood counterparts for the e-nano stand? The website only lists the classic woods for the stand, even if I'm choosing an exotic e-nano kit. Was hoping for a matching set.
Last edited:
Vapeur Rogue
Est. 2013- Never Lookin' Back
@Blargs- I have read that exotic choices for e-nanos can expand at times- I'm guessing that is one of the uncommon exotic wood choices from past extended options. It is lovely though!
caliganja420
Well-Known Member
Cannabis is safer then milk by the way (no question mark)
Hmm, you may need to clear your browser cache. Im not able to replacate the issue you're having and we've had orders in with other wood options today. If you email me at customerservice@epicvape.com I can help troubleshoot.
Psilocybeman
Active Member
A small charge cooked at low temperature, 5'25 on the dial
Wow! Just, Wow! DM me, please. I could use some of your talents if you are looking for some work?Pipe dreaming (make that Nano dreaming)
So during the last rainy stretch, stuck inside with the computer, the Nano and some fine Rainy Day Women I doodled up a concept of a semi wireless Nano with a magnetic power connector.
95% of Nano failures were terminal a connector coming loose usually caused by a hapless Nano doing a nose dive off a desk onto a hardwood or concrete floor. About 3% are cords going bad, and only about 2% are heater failures. As Yogi Berra would say.' the other x% is user error.'Morning folks
As I have a broken Nano incoming for repair from a mate, who acquired it 2nd hand, can somebody here please tell me, what’s the outer diameter of its heater cover/tube?
Apart from the functional defect (which hopefully shouldn’t pose much of a problem to fix, as long as the heater itself is not damaged -my money is on a lose terminal connection there or a broken cord, for which I hopefully already found a replacement-), it also comes without stems/GonGs and so I’d like to see, if I can find some fitting glass here on the European vape- or lab glass market, that can be utilised there or even cut some fitting stainless steel slide over tips myself, if I can’t find fitting glass.
Me mate might later on resort to getting some original stems/GonGs directly from Epicvape, but as importing Nano parts from the US to Europe still poses quite a hassle for the time being, I like to see first, if I can fix the unit and make it work again with what’s easily available here locally.
Having some days left before the little bugger arrives to have its problem fixed, I could then already place the orders for glass or steel, before it arrives. But for that, I need, as already stated, the OD of the heater tube.
Nice score!
Thanks in advance
If no light comes on using a straight-thru cord (no dimmer, i.e. stereo cord) It's most likely a loose terminal connector.
If the light comes on but you get no heat. It's most likely a failed heater.
For the record we use 14mm glass tubing with 2.2m heavy wall thickness. All glass tubing varies a little (very frustrating!) We flame polish the ends and bring the ID down to 9.3mm. The tubes are then annealed overnight to remove any stress induced by the cutting/polishing process.
The heater tube is .375" stainless steel rod (9.53mm) machined down on the tip to: .360 (9.13-9.15mm), this leaves a stop on the heater tube for the glass to sit.
The difference between the 9.3mm ID on the glass and the 9.15 OD on the heater tube is to allow for the expansion of the stainless steel when it gets hot. BTW we ship internationally virtually everyday (45 countries to date and counting) and have had very few customs issues or delays except for Germany.
The wood is ambrosia maple, I just picked up some and it is really special. They will be an option under exotics starting next week.
Exotic wood stands? I've tried but the wood is expensive, they are very labor intensive and you really can't appreciate the beauty of the wood with all the holes drilled in them, so we don't offer them. If I did, they would be a very expensive special order, and the wood would not necessarily match properly.
Mods: Sorry about the back to back post. Please feel free to merge as I'm not web smart enough.
Last edited by a moderator:
blokenoname
DIY Log Dabbler 😁🪵💪💨💨💨
Thank you for all the detailed info there, @ACE OF VAPE
..."except for Germany" being the operative term here, which is why I want to try finding or making some fitting glass or steel tubing for tips/stems myself first
Anticipating and being well aware of the indeed very annoying tolerance issues with glass from building my own homemade log vapes (running a thread here in the DIY section), we've to see how good a fit the glass tubing from my 14 mm tapered joint glass stems, I'm getting from a German lab glass supplier, actually is here, the glass tube itself having a 12mm OD and a nominal 10mm ID, which is akin more to 9,5mm to 9,0mm +/- in real life. If all goes well, these might already fit reasonable well enough.
Seeing now, that you machine down the tip of the heater tube to 9,13-9,15mm, making some ss slide over tips from the thin walled ss tubing I use for my own logs, should then pose no problem at all. I've got 10 mm OD ss tubing in 0,3mm wall thickness at the ready here, which makes for an inner diameter of about 9,4mm and should also provide a reasonable fit and there is also always the option of adding a high temp o-ring to provide a seal.
Will have yet to see what’s up with the innards, though for the most common failures there regarding terminals and cord I’m all set so far. Got a 230v/110v ‘stereo cord’ w/o dimmer and also another one with an integrated dimmer pot (1-40w) and US NEMA1 plugs off of Amazon already, which should hopefully work there. 230v to 110v converter is included by the seller already.
If it’s the heater itself, that’s gone south… well, I’ll have to look for a fitting replacement then, though if all else fails, there is still the option to rewire the unit for use with 12v DC power and setting in a 10w ss/ceramic cartridge heater, of which I’ve still enough lying around here. But I hope, that won’t be needed.
Thanks again. I'll let you know how it worked out
Last edited:
When Isay we have had difficulty with shipping to Germany, most if not all the issues have been with complete kits. Their concerns/complaints about the unit itself not being CE certified (which is why we don't currently make a specific 220v european version), and they wanted the instructions translated into German. To my recollection I don't believe we've had any issues shipping accessories to Germany I would have to check with Nadia to be sure.Thank you for all the detailed info there, @ACE OF VAPE
..."except for Germany" being the operative term here, which is why I want to try finding or making some fitting glass or steel tubing for tips/stems myself first
blokenoname
DIY Log Dabbler 😁🪵💪💨💨💨
Yep. Aware of the 'no CE certification drama' and our over sensitive customs here, and the costs for CE are beyond good & evil anyway, to say the least
Accessories should be good, as long as no electronics are included, AFAIK.
But then, my job is primarily in getting the unit up & running again and testing it out a bit, before sending back to my mate, who's already said, that he'll order some OG stems, GonGs and an e-pick from you then anyway
Can't help with the CE, but if you ever need the instructions translated into German, just shoot me a message
Last edited:
SloJimFizz
Unknown Member
Been doing nugs in my Nano stem lately. Breaking it down with the e pick after each pull.
Paris OG is mighty fine gong down.
Made a slight modification to my walnut Stando. Reamed out the stash spot to accommodate my Heat Island.
Nugs in the Nano @ 6.2365
Ground in the HI @ 10.3v
Two is better than one?
Paris OG is mighty fine gong down.
Made a slight modification to my walnut Stando. Reamed out the stash spot to accommodate my Heat Island.
Nugs in the Nano @ 6.2365
Ground in the HI @ 10.3v
Two is better than one?
Marlon Rando
Well-Known Member
Anyone have any good suggestions for a recycler or ash catcher for the Nano? Been looking on DH for a few pieces, don't want to break the bank either.
https://www.dhgate.com/product/2016-new-18-5cm-height-glass-s-bongs-glass/371413550.html, anyone try this one?
thanks.
https://www.dhgate.com/product/2016-new-18-5cm-height-glass-s-bongs-glass/371413550.html, anyone try this one?
thanks.
howie105
Well-Known Member
One of my favorite sizes with about the right amount of diffusion is linked below.
https://www.sneakypetestore.com/col...cts/the-sneaky-pete-globe?variant=26814594374
https://www.sneakypetestore.com/col...cts/the-sneaky-pete-globe?variant=26814594374
StringTheorista
Well-Known Member
Second this. This is a great little piece, reasonably priced, and Pete is great to do business with.
Last edited:
ataxian
PALE BLUE DOT
I never tried the FLASHevap?
Da NANO will give FLAVOR & EFFECT = CIVILIZED
Earlier KUSH
Just now CHEESE = LAUGH KINE
Hello Master!
Is it possible to do one of these for me?
Certainly there will be more requests ...
It's sad to deal with the voltage converter.
Blargas541
Well-Known Member
Thanks for all the info! I might just bite the bullet on the ambrosia maple enano when it comes available. Guess I'll go with the plain maple stand.
BigJr48
Well-Known Member
<Delta9>
Member
After seeing a few posts about cracking nanos, I have to ask... Is there any risk to continue using one that’s cracked? I got my walnut unit a few months ago and it cracked within the first week but I’ve continued to use it because I’d miss it too much if I had to send it away.
arb
Semi shaved ape
I wonder how many people do the same thing I did with two of mine.........use them instead of returning them.
I mailed my maple back in and when it gets back I will be doing the same with the cherry unit also.
I was going to live with them being cracked but ace of vape says it was a fluke and I want to believe that also.
This time I am going to just let them sit out and acclimate to our low humidity levels for a couple months before turning on for daily use and see if that makes a difference.
Exsmoker
Plant Manager
Mine recently cracked, and looking back, what may have contributed to mine splitting was that I left it on high for too long. I usually turn mine off at bedtime, and the next day I crank it up to 10 for a few minutes to quickly heat it (as they suggest), then turn it back down. But that day I got sidetracked or something and left it on high for an hour or more. The nano can get pretty hot when dialed to max. Later that day is when it split. Coincidence?
Last edited: