E-Nano from Epickai
anda1anda2
Well-Known Member
10-4. Thanks for the update!
UnevenPizza
I dream of Pizza
That setup looks really nice @anda1anda2!
The nano is very appealing, pragmatically and aesthetically. (=It looks good and vapes good!)
It takes a few sessions to find your sweet spot(s), but once you do it's really just like an electronic lighter/light sabre. I've been leaving mine on, the converter is nigh unhearable unless you focus on it, or it's touching an AUX-cord (like speakers...unfortunately..) but I'm usually listening to music etc. so I don't mind. BUT AN EU VERSION would be the thing that makes us a truly global civilization, this is my opinion only. You Americans can just plug it in, and leave it on to forget...easy peasy luxuryzy! Anytime perfect hits nonstop crazyparty!!!!!!!!!
With my Air for example I can take it along and set it to a certain temp if I absolutely need to make sure it's a certain temp, but usually I have 2-3 settings I know love and use on my nano;
low = 5.0 - 5.5
mid = 6.0 - 6.2
high = 6.3222221135 - 6.49000332 shoutout to @ataxian for his dilligent research!
If you only let it heat up for ~5 Minütes, you'll probably need to dial it a little bit higher.
Many hits on lower temps, fewer but more "impactful" hits on higher temps. I'm sure most of you know this but I thought maybe some newer people browsing would profit, ayayayyyyy!
I've been vaping on 5.5 and even lower through the bubbler, and it's really nice for hits that are not as hard-hitting, but still noticeable. And you don't burn your stuff, it gets brown but not too dark. Great for that AVB Smoothie/Sammich!
That Cork is pretty trippy too man!
Just a test:
The nano is very appealing, pragmatically and aesthetically. (=It looks good and vapes good!)
It takes a few sessions to find your sweet spot(s), but once you do it's really just like an electronic lighter/light sabre. I've been leaving mine on, the converter is nigh unhearable unless you focus on it, or it's touching an AUX-cord (like speakers...unfortunately..) but I'm usually listening to music etc. so I don't mind. BUT AN EU VERSION would be the thing that makes us a truly global civilization, this is my opinion only. You Americans can just plug it in, and leave it on to forget...easy peasy luxuryzy! Anytime perfect hits nonstop crazyparty!!!!!!!!!
With my Air for example I can take it along and set it to a certain temp if I absolutely need to make sure it's a certain temp, but usually I have 2-3 settings I know love and use on my nano;
low = 5.0 - 5.5
mid = 6.0 - 6.2
high = 6.3222221135 - 6.49000332 shoutout to @ataxian for his dilligent research!
If you only let it heat up for ~5 Minütes, you'll probably need to dial it a little bit higher.
Many hits on lower temps, fewer but more "impactful" hits on higher temps. I'm sure most of you know this but I thought maybe some newer people browsing would profit, ayayayyyyy!
I've been vaping on 5.5 and even lower through the bubbler, and it's really nice for hits that are not as hard-hitting, but still noticeable. And you don't burn your stuff, it gets brown but not too dark. Great for that AVB Smoothie/Sammich!
That Cork is pretty trippy too man!
Just a test:
Last edited:
vapen00b
Many vapes & accessories. Always happy to help
Hi peeps,
has anyone heard back from Nadia recently?
As much as I love the product, I begin to hate their lack of communication...
Doing business with them is like pulling a teeth - and I'm not a dentist. 
Sorry, rant over... Been trying to order for weeks now and it stings a bit. Good that I'm on a t-break - or not?!
Enjoy what ever you do - back to positivity
has anyone heard back from Nadia recently?
As much as I love the product, I begin to hate their lack of communication... Doing business with them is like pulling a teeth - and I'm not a dentist. Sorry, rant over... Been trying to order for weeks now and it stings a bit. Good that I'm on a t-break - or not?!
Enjoy what ever you do - back to positivity
Mr. Gweilo 420
Dude
You are not wrongHi peeps,
has anyone heard back from Nadia recently?
Sorry, rant over... Been trying to order for weeks now and it stings a bit. Good that I'm on a t-break - or not?!
Enjoy what ever you do - back to positivity
Hi peeps,
has anyone heard back from Nadia recently?
Sorry, rant over... Been trying to order for weeks now and it stings a bit. Good that I'm on a t-break - or not?!
Enjoy what ever you do - back to positivity
Just a friendly reminder, any orders placed outside of our normal website will require more time. Especially if you're requesting us to work around customs. I replied to your PM but feel free to contact me at customerservice@epicvape.com if you are having any issues getting in touch with me.
vapen00b
Many vapes & accessories. Always happy to help
Just a friendly reminder that we have been in talks for weeks (!).
As you're addressing me publicly, I will respond as well:
I have been contacting you through several channels you're actively using - email too - , so I'm failing to understand why it's so hard to get a simple estimation or specific answers - this is meant in general, not in regards to one single message.
We're not talking about actually ordering yet, are we? I still don't even have numbers or a confirmation in any way. I wish we were that close after all that time...
You finally replied to our PM conversation today, thank you. I'd definitely appreciated, if you would have advised me in the first place to exclusively contact you via that email address, if everything else takes that much time - I don't want to bind unnecessary resources and I hate to waste anyone's time. .
Lastly, what about discretion? I almost feel offended - totally new experience on FC.
If this is how you're doing business, please keep your stuff and leave it this way.
To anyone here: sorry for the drastic words. This is my first and only official complaint, but I feel it's necessary. I tried to put it in a constructive way to open eyes and improve things, hopefully.
I won't comment on this any further and respect the rules.
anda1anda2
Well-Known Member
Thanks for the tips! I am still taking it through its paces, but am starting to get more consistent results.That setup looks really nice @anda1anda2!
The nano is very appealing, pragmatically and aesthetically. (=It looks good and vapes good!)
It takes a few sessions to find your sweet spot(s), but once you do it's really just like an electronic lighter/light sabre. I've been leaving mine on, the converter is nigh unhearable unless you focus on it, or it's touching an AUX-cord (like speakers...unfortunately..) but I'm usually listening to music etc. so I don't mind. BUT AN EU VERSION would be the thing that makes us a truly global civilization, this is my opinion only. You Americans can just plug it in, and leave it on to forget...easy peasy luxuryzy! Anytime perfect hits nonstop crazyparty!!!!!!!!!
With my Air for example I can take it along and set it to a certain temp if I absolutely need to make sure it's a certain temp, but usually I have 2-3 settings I know love and use on my nano;
low = 5.0 - 5.5
mid = 6.0 - 6.2
high = 6.3222221135 - 6.49000332 shoutout to @ataxian for his dilligent research!
If you only let it heat up for ~5 Minütes, you'll probably need to dial it a little bit higher.
Many hits on lower temps, fewer but more "impactful" hits on higher temps. I'm sure most of you know this but I thought maybe some newer people browsing would profit, ayayayyyyy!
I've been vaping on 5.5 and even lower through the bubbler, and it's really nice for hits that are not as hard-hitting, but still noticeable. And you don't burn your stuff, it gets brown but not too dark. Great for that AVB Smoothie/Sammich!
That Cork is pretty trippy too man!
Just a test:
I am definitely finding better results by turning on the unit and just letting it get up to temp over a half hour or so. If I try to rush it, I am finding I am not able to do back-to-back loads.
Also, weird I can see your image when I quote it, but not in the thread itself.
http://fuckcombustion.com/threads/what’s-up-with-imgur.29564/
22 posts down in that thread Pak gives info about how to get around the problem. In post 27 I explain about what's going on.
UnevenPizza
I dream of Pizza
Stu is always watching?
I always read his description as Bacon-hero
Sorry to @vapen00b for your issues with CS, it's one of the few things I've heard non-flattering things about when it comes to the nano/epic (that it can be not as smooth as a bigger company etc). I hope it gets resolved.
Been working hard finally, very fullfilling even if I'm only an upayed intern. It's been strangely cool and rainy the last few days, and my nano is keeping me toasty company, always ready for a hit. Yesterday I brought out the big guns, big ol' beaker with some ice cubes - nano fills it like nobodys business.
I always read his description as Bacon-hero
Sorry to @vapen00b for your issues with CS, it's one of the few things I've heard non-flattering things about when it comes to the nano/epic (that it can be not as smooth as a bigger company etc). I hope it gets resolved.
Been working hard finally, very fullfilling even if I'm only an upayed intern. It's been strangely cool and rainy the last few days, and my nano is keeping me toasty company, always ready for a hit. Yesterday I brought out the big guns, big ol' beaker with some ice cubes - nano fills it like nobodys business.
vapen00b
Many vapes & accessories. Always happy to help
Thanks mate. I do too - still. But hope is fading and I won’t hold my breath.
Treat yourself and toke one for me!
BabyFacedFinster
Anything worth doing, is worth overdoing.
Well, you keep saying that you just want to make one comment and move on, but it's now three posts of negativity. And not all of it constructive, such as the posted comments above.
If you are not happy then maybe you should stop holding your breath and move on to something else. If you are wanting us to be aware that Epic is not timely in contacts with you, then fine we hear you. It is not typical of Epicvape but no one is infalable.
I'm sorry my friend, I don't mean to start an issue with you and I don't usually get on a soapbox, but seriously? We have people come on the thread who are unhappy at times, they are welcomed and folks try to help. And people have a right to speak their mind, same as anyone else. But the last number of times you came on here you expressed your concerns, but took it as an opportunity to take a pot shot at the vendor. After 2-3 times of doing this it's going to piss people off. I think Epic has earned that respect here.
Mods: I'm sorry.
Last edited:
CarolKing
Singer of songs and a vapor connoisseur
@vapen00b problems occasionally pop up in any business.
First off EpicVape is a small business with just a few employees. I’ve done business with them for the past three years ordering assessories or buying a log vape. I’ve always had good customer service. I had something fixed last year on my Enano and turnaround time was just two weeks. I do live only two states away.
We state our problems here on the forum then we move on. Most of the comments are positive here in the thread.
It would be too bad if you missed out on a great vaporizer just from a miscommunication issue.
Great vape, wonderful herb and good times to all.
First off EpicVape is a small business with just a few employees. I’ve done business with them for the past three years ordering assessories or buying a log vape. I’ve always had good customer service. I had something fixed last year on my Enano and turnaround time was just two weeks. I do live only two states away.
We state our problems here on the forum then we move on. Most of the comments are positive here in the thread.
It would be too bad if you missed out on a great vaporizer just from a miscommunication issue.
Great vape, wonderful herb and good times to all.
UnevenPizza
I dream of Pizza
Sometimes I have a hard time deciding which way to use the nano. It's a first world problem for sure, but if you too suffer from something similar, try this remedy.
I take my normal load and divide it into 3 miniscule parts, then load my dry stem, Bubbler, and Beaker with that and...enjoy - 3 ways of joy!
You can get away with tiny loads (0.01g for example) and still have a great experience. Other vapes need a bit more in the oven/chamber, but since the nano utilizes convection it's all good I guess! And compared to combustion/joints or bowls, the amounts needed are ridiculously small.
Of course you can also do 0.5 bowls in the nano, but I like to draw it out!(no pun intended)
I take my normal load and divide it into 3 miniscule parts, then load my dry stem, Bubbler, and Beaker with that and...enjoy - 3 ways of joy!
You can get away with tiny loads (0.01g for example) and still have a great experience. Other vapes need a bit more in the oven/chamber, but since the nano utilizes convection it's all good I guess! And compared to combustion/joints or bowls, the amounts needed are ridiculously small.
Of course you can also do 0.5 bowls in the nano, but I like to draw it out!(no pun intended)
BabyFacedFinster
Anything worth doing, is worth overdoing.
I had the nano set a bit high for mine at 6.5. This is because I had been vaping some cotton and oil and didn't bother changing the dial.
I had chores to do. First I had to finish the leftover bowl of Blue Dream that was in there from before, otherwise it would be too sticky to get it cleanly out of the gong. Then I took the leftover cotton ball that I had removed previously to vape the Blue D, it still had some gummy oil left in it so I had to finish that. Finally, I packed another bowl of Cheese, took the flavor hit off it and left the rest to finish before I go to bed.
Anyway, just wanted to check in and bump the thread back up. The cream will always rise to the top.
I had chores to do. First I had to finish the leftover bowl of Blue Dream that was in there from before, otherwise it would be too sticky to get it cleanly out of the gong. Then I took the leftover cotton ball that I had removed previously to vape the Blue D, it still had some gummy oil left in it so I had to finish that. Finally, I packed another bowl of Cheese, took the flavor hit off it and left the rest to finish before I go to bed.
Anyway, just wanted to check in and bump the thread back up. The cream will always rise to the top.
i found through water is more refreshing feeling and dry is lazy mode 
but its just me 
nano still 
![:\](/i/s/hmm.gif "Hmm :\")
caliganja420
Well-Known Member
Would you guys recommend the enano for a daily driver? We are 2 people and would like to replace our volcano digit, since the bags and the ammount of herb it uses is a little dissapointing.
I know it can only pack about .1 per bowl...
Does it create big clouds?
Any other surprises with this vape
I know it can only pack about .1 per bowl...
Does it create big clouds?
Any other surprises with this vape
CarolKing
Singer of songs and a vapor connoisseur
I use my Enano as a daily driver and as a session vape. I suggest this vaporizer all the time. Log vapes are easy to use and easy maintenance. I happen to like an all glass airpath.
I’m using my Enano along with some GrapeApe. I love that strain.
I’m using my Enano along with some GrapeApe. I love that strain.
BabyFacedFinster
Anything worth doing, is worth overdoing.
Look no further.
I don't know if I've ever really packed a load as big as .1g. I'm usually at about .05 or less and I don't consider myself a microdoser. With the nano, less is more. Sometimes I'll take a small nugglet and wipe some CO2 oil on it and throw that in a gong. That gets me ripped so I don't do that too often.
Yeah, I've seen the bowl size on a volcano, and the bags. That's too much vapor at one time for me. Maybe If I needed to get a whole football team high. I'd rather do two .05 loads and spread it out, plus get two separate flavor hits.
The nano is a powerful herb heating engine. The 1 to 10 dial can take you from whispy terpy hits to charring or combustion. You end up finding your sweet spot, which is around a 6 for me. So plenty of power for big clouds, would be based more on the type of herb your using.
Happy 4th everyone!
Whissmu
Well-Known Member
+1
from the volcano to the nano will always be a change for the better, less expense, better taste and many more options of water, air and etc
…when I tested my nano
I sold my vulcano ... that's my summary for your questions 
!!You can have a stem each person but I believe that sincerely you will end up with a nano cadauno and it can always be a spare one
...
Dynavaper
Karma Farmer
Your ugly Volcano with that ridiculous bag (my apologies to all who need to use a bag for motoric reasons) will spend the rest of his life on your shelf once you have your e-Nano. Amounts per use are incredibly small (especially in comparison), the clouds are dense and super tasty and it looks so much better than his S&B counterpart at a fraction of its size. No-brainer if you ask me. Just yesterday evening, I was incredibly surprised again how much vapor and tasty clouds I could get out of nearly zero material.
BabyFacedFinster
Anything worth doing, is worth overdoing.
Here's an observation:
I loaded a rice-sized dose of CO2 oil on a small pinch of organic cotton and dropped the nano on the gong. The first hits were very light with little vaper. It was obvious to me that I wasn't getting good extraction and I even turned up the nano half a step.
I took the cotton out and could still see the dab in there. I pulled the cotton apart a few times and began smearing the oil on more of the cotton dab till most of the fibers were coated, then I put it back. This time I milked the glass and had to stop quickly lest I get too much medicine at one time. (too late I think
)
Holy Shit, that was like using an enail.
It makes sense when you think of surface area and exposure to heat, but I never thought of it in relation to a cotton dab. The problem is you end up getting some on your fingers, but working the dab into the cotton before hitting it makes good sense. Just be ready for it, 'cause it kind of bites you by the boo boo.
Maybe I can pull it all apart with a pair of dabbing tools. I think I'll take a rest first.
I loaded a rice-sized dose of CO2 oil on a small pinch of organic cotton and dropped the nano on the gong. The first hits were very light with little vaper. It was obvious to me that I wasn't getting good extraction and I even turned up the nano half a step.
I took the cotton out and could still see the dab in there. I pulled the cotton apart a few times and began smearing the oil on more of the cotton dab till most of the fibers were coated, then I put it back. This time I milked the glass and had to stop quickly lest I get too much medicine at one time. (too late I think
)Holy Shit, that was like using an enail.
It makes sense when you think of surface area and exposure to heat, but I never thought of it in relation to a cotton dab. The problem is you end up getting some on your fingers, but working the dab into the cotton before hitting it makes good sense. Just be ready for it, 'cause it kind of bites you by the boo boo.
Maybe I can pull it all apart with a pair of dabbing tools. I think I'll take a rest first.
Last edited: