E-Nano from Epickai

JJ420

JJ420

chillin on the couch, sippin off a 22 ounce.
Got my 18mm GonG adapter in the mail yesterday...

In short, it makes the Nano nearly equal to the Supreme in terms of MASSIVE hits. Paired it up with a few 18mm glass pieces, and it has literally rocked my world.

I'm gonna be ordering a second adapter soon because it works so damn well!
 
VaporBaked

VaporBaked

Member
Love the heat the wood holds. Its nice to leave this on all the time and not worry about any warm up time. Getting the hang of it pretty well now. At first I used some stuff that was ground and could not get rid of all the green in the bowl. I would suck it up into the bowl until full, the load would shrink and I would not get any more vapor. I used scissors the next time around to chop and packed it half full. Much better results! For some reason I think it likes it kinda chunky.


I also took one of the SS screens and pushed it onto the glass screen from the top with an un-sharp pencil, fits perfectly!
 
lazylathe

lazylathe

Almost there...
VaporBaked said:
Love the heat the wood holds. Its nice to leave this on all the time and not worry about any warm up time. Getting the hang of it pretty well now. At first I used some stuff that was ground and could not get rid of all the green in the bowl. I would suck it up into the bowl until full, the load would shrink and I would not get any more vapor. I used scissors the next time around to chop and packed it half full. Much better results! For some reason I think it likes it kinda chunky.


I also took one of the SS screens and pushed it onto the glass screen from the top with an un-sharp pencil, fits perfectly!
Click to expand...

I am finding that smaller loads work surprisingly well in my Nano!
Used to pack the bowl full and it would not last as long.
I am thinking the key to this vape is a loosely packed bowl, not full or compacted, and some nice long hauls on the stem and you are done!

What i have been doing lately is i added a small bit of silicone tubing to the top of the stem and then use my Pinnacle WT.
Nice cool, moisturized vapor!
I find i can get a lot more hits out of a load this way and the effects are even more medicating.
Great for what i need it for!
 
newVaper420

newVaper420

Vapor Enthusiast
Hey all!

Well I had a launch day E-Nano, and now I have what I will like to call a version 2. I gave my launch day E-Nano to my sick uncle. After I left, he got very sick and had to go to the hospital so he hasn't been able to use it much, but I digress. Hopefully he will get better soon. He absolutely loved the E-Nano. And when we used it together, we saw him moving and running around like he never was. So my Mom decided to buy him one and the easiest way to accomplish this was to give him that one and order myself another. I knew that the E-Nano was the same exact vape I needed back in my collection.
So I don't have my version 1 in my possession anymore and it's been 2 weeks since I used it approximately.

Version 2 is amazing. I couldn't even expect the awesomeness I was getting.

At first, I was worried about the no rings and design of it. But let me tell you, the solid piece of wood is slick and sophisticated. So amazing. I think there might even be some sort of gloss around (not very good with word terms) but it looks very awesome.

The stems fit looser (if I can remember) then my version 1 but I like that. Much easier to get off the heater.

The quality of the dial is much better for me. Version 1 would be able to combust at 6.5 / 7 on the dial for me. It was crazy. I told my uncle to use 5.5.

With the new E-Nano I needed to go to up to 8 today. Which is great. Because I think that is a way better scale, than the ability to combust with my version 1.

Anyhow, love love love the new unit. Great job Andy!!!! I will hopefully be bringing more business your way!
 
Last edited:
Lokbok

Lokbok

Well-Known Member
Anyone talk to Andy recently? I know he's a really busy guy but he was gonna send me a silicone adapter for my E-Nano about a month ago. Tried contacting him again with no avail. Not sure if email just isn't getting through.
 
Lokbok,
VaporBaked

VaporBaked

Member
newVaper420 said:
Hey all!

Well I had a launch day E-Nano, and now I have what I will like to call a version 2. I gave my launch day E-Nano to my sick uncle. After I left, he got very sick and had to go to the hospital so he hasn't been able to use it much, but I digress. Hopefully he will get better soon. He absolutely loved the E-Nano. And when we used it together, we saw him moving and running around like he never was. So my Mom decided to buy him one and the easiest way to accomplish this was to give him that one and order myself another. I knew that the E-Nano was the same exact vape I needed back in my collection.
So I don't have my version 1 in my possession anymore and it's been 2 weeks since I used it approximately.

Version 2 is amazing. I couldn't even expect the awesomeness I was getting.

At first, I was worried about the no rings and design of it. But let me tell you, the solid piece of wood is slick and sophisticated. So amazing. I think they're might even be some sort of gloss around (not very good with word terms) but it looks very awesome.
The stems fit looser (if I can remember) then my version 1 but I like that. Much easier to get off the heater.

The quality of the dial is much better for me. Version 1 would be able to combust at 6.5 / 7 on the dial for me. It was crazy. I told my uncle to use 5.5.

With the new E-Nano I needed to go to up to 8 today. Which is great. Because I think that is a way better scale, than the ability to combust with my version 1.

Anyhow, love love love the new unit. Great job Andy!!!! I will hopefully be bringing more business your way!
Click to expand...

Agree with the #8 setting, this thing is bad ass! This piece of wood is sweet to hold cant wait until fall it will be nice and warm. I already got one friend that ordered one of these too. Does anyone wax or treat the wood with anything? I also got a power inverter for the car and it works just like at home. I will say this again with every one else here...great work Andy, thank you for making this! and thank you for making my usage go up! :lol: Sorry to hear about your Uncle NewVaper420
 
xer0

xer0

Well-Known Member
I haven't treated the wood with anything and it still has the glossed look and feel that newVaper mentioned.

I went ahead and ordered another GonG. I've been using the cracked one again for the last couple days and I really prefer using it over the wand with an O-ring on the end of it. Hopefully the new one arrives before the old one breaks for good.
 
ACE OF VAPE

ACE OF VAPE

Vape outside the box
Manufacturer
As some of you may already know, I've been moving my shop and my residence both, all month and some orders were delayed and some mistakes were made. I apologize. Getting back on track now. If you ordered something and haven't revieved it yet please pm me.
 
U

Undeadhelghast

Member
Hey guys I have two enanos. One for me (walnut) and one for my girlfriend (maple). Let me start off by saying we've had these since the initial batch, and they have been phenomenal vapes that have so far tided us over (since our cloud broke, and we're waiting for the evo) until now. i feel as though i should ship both of them for warranty repairs but i dont want to be vapeless until october. The cherry one has a crack running down the center of it like a lot of the old ones with lines did, and my walnuts wire is finicky so if we move it slightly it turns off and on repeatedly, so it doesn't heat up properly. Other than that we have nothing but positive things to say both about the vapes and the people that make them. Also when we decide to ship them how would everyone recommend we clean them for shipping? I know this has been covered on other vaporizers, but I feel this is more of a model specific question. Any help would be appreciated.
Thanks, combustion fuckers :puke:
 
Undeadhelghast,
z9

z9

Well-Known Member
Undeadhelghast said:
Hey guys I have two enanos. One for me (walnut) and one for my girlfriend (maple). Let me start off by saying we've had these since the initial batch, and they have been phenomenal vapes that have so far tided us over (since our cloud broke, and we're waiting for the evo) until now. i feel as though i should ship both of them for warranty repairs but i dont want to be vapeless until october. The cherry one has a crack running down the center of it like a lot of the old ones with lines did, and my walnuts wire is finicky so if we move it slightly it turns off and on repeatedly, so it doesn't heat up properly. Other than that we have nothing but positive things to say both about the vapes and the people that make them. Also when we decide to ship them how would everyone recommend we clean them for shipping? I know this has been covered on other vaporizers, but I feel this is more of a model specific question. Any help would be appreciated.
Thanks, combustion fuckers :puke:
Click to expand...

Have you contacted Andy about your problems? I'd try to get the one with the power cord issue fixed ASAP. If you're really worried about being Nano-less then why don't you just send one in for repair and use the other while you wait? Yeah the shipping costs will be higher... but so will you :brow:

As for cleaning just make sure the screen and tip of the "heater chamber", for lack of a better term, are clean; just scrub with a q tip and iso. Obviously you don't need to send the stems which are the only things that should be in contact with bud during use.
 
Last edited:
U

Undeadhelghast

Member
Thanks Z. Yeah everything you said was what I was thinking, but I still don't know If I wanna do the send them in separately thing. I'd rather just ship out two, and get two back can ya diggit? So I guess I'll just wait until October :\ it's so soon but feels so damn far away... How VAS can make me feel like a little kid on Christmas morning. How many of you guys love putting blonde hash in their GONG, as much as I do?
 
Undeadhelghast,
ataxian

ataxian

PALE BLUE DOT
newVaper420 said:
At first, I was worried about the no rings and design of it. But let me tell you, the solid piece of wood is slick and sophisticated. So amazing.
Click to expand...
Big improvement!

I did not buy the first version of the NANO because of the rings.
Waited until the rings were removed.

Less is more!
z9 said:
Have you contacted Andy about your problems? I'd try to get the one with the power cord issue fixed ASAP.
Click to expand...
The new cord is another big improvement!

I keep looking at adding more vaporizers however the Stealth factor of the NANO fits my Stealthy Life Style Best!

Cannabis is why we are here anyway!
 
Last edited:
ataxian

ataxian

PALE BLUE DOT
TheRamblingSoul said:
Several days of - ahem - building up my tolerance later, the E-Nano still tears through my tolerance like a hot knife through butter... And Bruce Lee's got the knife. And the butter is Chuck Norris.

Anyways, thank you E-Nano! You're the best! ;pd;:spliff:
Click to expand...
I saw SHREDHEAD do this on the SOLO site so I tried it with the NANO.
Us old schoolers can this keep up!
Since this blog is slow I thought I'd post it here with fellow NANO users.

WHITE WIDOW OG session double vision!
 
shredhead

shredhead

Specialist
ataxian said:
I saw SHREDHEAD do this on the SOLO site so I tried it with the NANO.
Us old schoolers can this keep up!
Since this blog is slow I thought I'd post it here with fellow NANO users.

WHITE WIDOW OG session double vision!
Click to expand...
Respect! Good combo eh? Whenever I want one hit to blow me out of the water this is what I do. Solo with any log vape works amazing!
 
shredhead,
  • Like
Reactions: ogcook
luvdavape

luvdavape

Member
I don't understand why everyone who hates the placement of the dimmer switch just doesn't fix it to their preference.
There's no way Andy can please everyone unless he were to do this by order. Fixing this is less costly and takes less time than hemming that pair of pants you got with your suit which were un-hemmed so you could make them 'perfect for you'.
Maybe I'm missing something or our throw-away society has lost it's ability to even think, "hey, I can fix that".

An extension cord can be bought for a few bucks and gives you plenty of cord to work with.
Two screws on the switch and probably 2 or 3 on the base of the eNano.
Replace the length of cord from the switch to the unit with the length you prefer. Screw back together and you're good to go.
(you might need to pick up some more cork or felt pads for the bottom, maybe not, but they're really cheap if you do)

It's not like you're working on a circuit board or you have to figure out where anything goes, just replace as is with the longer cord.
This is about as simple as it gets.

This is what I plan on eventually doing.
 
luvdavape,
  • Like
Reactions: ataxian
You must log in or register to reply here.
Top Bottom