BT Bean

Bredda Gravalicious
Did you happen to pick up a j-hook yet, Mr. Bean?


I have not. I do want one, and I anticipate the experience will be different than a dry d020-d, more like a longer dry stem. It’s on my list, and I look forward to cultivating the whole ‘lord of the manor’/Sherlock Holmes vibe. Jolly good.

Speaking of cultivating, here are a couple pics of the Trainwreck:

9vaMcWJ.jpg


ZwDQFQW.jpg
 
Last edited:

flotntoke

thoroughly vaped
I have not. I do want one, and I anticipate the experience will be different than a dry d020-d, more like a longer dry stem. It’s on my list, and I look forward to cultivating the whole ‘lord of the manor’/Sherlock Holmes vibe. Jolly good.

Speaking of cultivating, here are a couple picks of the Trainwreck:

9vaMcWJ.jpg


ZwDQFQW.jpg


LOVELY!!! My monitor even feels a little sticky. :mmmm:
 

WildChild

Seeking My Shangri-La
Greetings. I'm really interested in buying this vaporizer and am wondering if any Canadian retailers sell it? What is the best deal?

Any suggestions are greatly appreciated.

(My apologies for not going through the whole thread to find the answer but it's HUGE! No luck finding a retailer on Google...)
 

flotntoke

thoroughly vaped
Greetings. I'm really interested in buying this vaporizer and am wondering if any Canadian retailers sell it? What is the best deal?

Any suggestions are greatly appreciated.

(My apologies for not going through the whole thread to find the answer but it's HUGE! No luck finding a retailer on Google...)

Only place to get one is from the manufacturer, EpicVape - epicvape.com . You may want to check the classifieds, though. They come up from time to time.
 

Hjalmark

Oldest boy alive
Greetings. I'm really interested in buying this vaporizer and am wondering if any Canadian retailers sell it? What is the best deal?

Any suggestions are greatly appreciated.

(My apologies for not going through the whole thread to find the answer but it's HUGE! No luck finding a retailer on Google...)

This vape is too personal for retailers ;)

Its more like adopting a child so recommend getting it straight from the womb with all the warranty bells and whistles ;)

Also spending the extra 50 bucks on exotic wood is more then worth it, my biggest regret was getting the cheapest one .. Saving couple of bucks on something that might outlast you is not worth it

Can even send your own wood in.. I think
 
Last edited:

UnevenPizza

I dream of Pizza
You have more VAPORIZERS than JESUS has follower's?

Only two I miss however the NANO is one of them!

Out of curiosity, which is the other?

An Update on my Nano: Still in the Mail...:hmm:
However I did get a letter that I got "something" waiting for me yesterday, all the Postal dude wrote was "USA" in the field where you normaly write who sent it xD I love this guy. so informative always.

I'll admit, it has been a little torturous watching this thread the last few days/weeks ;D
 

UnevenPizza

I dream of Pizza
Just got it all set up, tested it through water and with the "dry" stem, really nice! I still need to practice a bit and find the optimal load/distance to the heater, I can tell. But had some really big and tasty clouds already.

So beautiful..so tiny!
I got the Premium Walnut, and it fits right in on my faux-Walnut desk!

YdsBiEB.jpg


Rzebom3.jpg


Took these with my phone, so they're not very HD - but still, nice to be part of the club!
:rockon:
 

WildChild

Seeking My Shangri-La
Only place to get one is from the manufacturer, EpicVape - epicvape.com . You may want to check the classifieds, though. They come up from time to time.
Ah, OK. Thank you for that. I think I'll wait for the Canadian dollar to get closer to par with the American dollar. The exchange rate would make this pretty expensive!

Appreciate the information.
 

ataxian

PALE BLUE DOT
Just got it all set up, tested it through water and with the "dry" stem, really nice! I still need to practice a bit and find the optimal load/distance to the heater, I can tell. But had some really big and tasty clouds already.

So beautiful..so tiny!
I got the Premium Walnut, and it fits right in on my faux-Walnut desk!

YdsBiEB.jpg


Rzebom3.jpg


Took these with my phone, so they're not very HD - but still, nice to be part of the club!
:rockon:
Very NICE!

The NANO is so simple and the function is divine.
I LOVE the NANO!
WATER is new to me.
The NANO works with all of them.

I have another I love however it's still in my wife's office waiting to be send in for repair?

When @ACE OF VAPE sends me the NANO back in to my hands watch out!

MEDICATION will make it self manifest.

My CANNABIS COLAS taste amazing!
In a NANO?

WOW!

KIND OF CIVILIZED
IN A DECENT WAY!

If you own a NANO you know what I mean?
 

Hjalmark

Oldest boy alive
Just got it all set up, tested it through water and with the "dry" stem, really nice! I still need to practice a bit and find the optimal load/distance to the heater, I can tell. But had some really big and tasty clouds already.
:rockon:
Have you seen or figured out that the e-pick shows you how far to keep the screen and how much you can load?

Someone is going to pull up a picture as I am too fucked to be bothered ... So hot / sweaty / muddy and just came in from the garden
 

UnevenPizza

I dream of Pizza
Have you seen or figured out that the e-pick shows you how far to keep the screen and how much you can load?

Someone is going to pull up a picture as I am too fucked to be bothered ... So hot / sweaty / muddy and just came in from the garden

Yeah, saw it a while back, can't remember where though. Isn't it on the epicvape site as well? I'll find it, I don't think its been that long. But thanks!
 

BabyFacedFinster

Anything worth doing, is worth overdoing.
Right now I'm lying on my couch surfing the FC with my nano sitting on my chest. I've got some Lucky Charms in the dry stem and I'm just puffing away.

Relaxed and Civil :peace:

Other than trying to find a Joda piece, is there somewhere else to buy a plain gong for the nano with a carb?
 
Last edited:

flotntoke

thoroughly vaped
Just got it all set up, tested it through water and with the "dry" stem, really nice! I still need to practice a bit and find the optimal load/distance to the heater, I can tell. But had some really big and tasty clouds already.

So beautiful..so tiny!
I got the Premium Walnut, and it fits right in on my faux-Walnut desk!

YdsBiEB.jpg


Rzebom3.jpg


Took these with my phone, so they're not very HD - but still, nice to be part of the club!
:rockon:

Ahhhhhhh.... she's a beauty! Glad she's doing well for you and you have the right attitude about her. You'll probably get a little better with every load for the first 25 - 30. Once you settle in with your personal technique, play around with it a bit. When you get a better feel for regular performance, it can be surprising how much a dial adjustment of 1/4 in either direction or a nudge of the screen can shift flavor and effect.

Don't think I've linked this video for quite some time. I had had my nano for about a year before this was put up and had been doing things a bit differently. Went to this method and was blown away by how much better things got. Have made slight tweaks to it over the years, but this is still the base of my tech.


Great tunes too, @UnevenPizza ! Had to play that one a couple times. :tup: Lonnie Liston Smith!
 

BabyFacedFinster

Anything worth doing, is worth overdoing.
Ahhhhhhh.... she's a beauty! Glad she's doing well for you and you have the right attitude about her. You'll probably get a little better with every load for the first 25 - 30. Once you settle in with your personal technique, play around with it a bit. When you get a better feel for regular performance, it can be surprising how much a dial adjustment of 1/4 in either direction or a nudge of the screen can shift flavor and effect.

Don't think I've linked this video for quite some time. I had had my nano for about a year before this was put up and had been doing things a bit differently. Went to this method and was blown away by how much better things got. Have made slight tweaks to it over the years, but this is still the base of my tech.


Great tunes too, @UnevenPizza ! Had to play that one a couple times. :tup: Lonnie Liston Smith!

Of course that guy had lungs of steel. I would have needed 3 separate hits to get down what he extracted in his first draw. Still, a very good video of what the nano is capable of (and how to do it.) I've watched it several times in the past just because it's so :chill: .

I pulled out my 12 inch perc tonight, which is my biggest piece (unless the FC UFO is bigger) Lately I've been using the dry stem or the little hydrotube. I forget how much I love large amounts of glass and water. Some flavor is lost, but the hits are so easy on my lungs.

@ataxian : I was just flipping the gong over with my fingers and it popped out of my hand and did a tumble-salt in mid-air. Out of dumb luck I happened to catch it, otherwise it would have been another gong casualty.

While it was in mid-air, I thought of you.
 
Last edited:

UnevenPizza

I dream of Pizza
Ahhhhhhh.... she's a beauty! Glad she's doing well for you and you have the right attitude about her. You'll probably get a little better with every load for the first 25 - 30. Once you settle in with your personal technique, play around with it a bit. When you get a better feel for regular performance, it can be surprising how much a dial adjustment of 1/4 in either direction or a nudge of the screen can shift flavor and effect.

Don't think I've linked this video for quite some time. I had had my nano for about a year before this was put up and had been doing things a bit differently. Went to this method and was blown away by how much better things got. Have made slight tweaks to it over the years, but this is still the base of my tech.


Great tunes too, @UnevenPizza ! Had to play that one a couple times. :tup: Lonnie Liston Smith!

Yeah, that intro is so heavy!

Hehe, yeah, I've watched his playlist several times while my nano was in the mail ;D

Very inspiring.

I've just turned it on this morning, leaving it at about 2-3 and then turning it up to around 6-7 for a few hits, I think it does improve them if it's left to heatsoak a while. I can't find my scale at the moment so I don't really know how much I'm putting it, but I just try to eyeball it.

I've seen a few posts around the web of people thinking their nano was broken or they weren't getting fat clouds on the first use - I think that's just a matter of practicing it. I was dissappointed at first with my Solo too, because I didn't figure out the proper technique for a while. That's just normal.

Got some nice CBD bud with almost no THC, so I don't mind sacrifing a few hits of that to figure out what works best (for science!).

I wonder if the Voltage/Wattage/Temperature changes due to using a 220 to 110 converter. That's also my reason for being weary of leaving it on all day..I got a moderate converter, not the cheapest one (but by no means fancy), it's capable of sustained wattage of 70, max of 100, so I don't worry about maxing it out with the nano. Just not sure if you can leave those on/plugged in all the time, or if it's only intended for short use (i.e. for someone who wants to use a hair dryer or drill etc).

A few times I did actually get a decent, tasty hit. I feel like I won't need another home vape. Unless they come out with a 220v version :love:

Totally what I was looking for, a few big hits and done. I can just vape and not think about it too much or take a long time doing it. Just hit it and quit it haha.
 

Hjalmark

Oldest boy alive
@UnevenPizza I am also on 220v system with a max 100 watt convertor and I left it on for days without problems, but I never hit mine unless leaving it on for +15 min on 7 and then I might lower it down a smits for hits through bubbler

Its the best when it's been heat soaking for hours but also while prepping the bud I leave the gongs in the enano so they can get heat soaked also

Specially heat soak the gong if I am doing low heat hits!

Edit: if I need my nano "fast" I leave it laying on the side with the dial turned to max and then it heats up in around 8-10 min
 

UnevenPizza

I dream of Pizza
@UnevenPizza I am also on 220v system with a max 100 watt convertor and I left it on for days without problems, but I never hit mine unless leaving it on for +15 min on 7 and then I might lower it down a smits for hits through bubbler

Its the best when it's been heat soaking for hours but also while prepping the bud I leave the gongs in the enano so they can get heat soaked also

Specially heat soak the gong if I am doing low heat hits!

Edit: if I need my nano "fast" I leave it laying on the side with the dial turned to max and then it heats up in around 8-10 min

Ahh, interesting. Yeah I just tried again, definite improvement.
My Converter also only makes a very faint sound and doesn't seem to get hot (if anything mildly warm), I just unplug it at night (need to get an extension cord with a switch!).

You go lower for water? I thought it should be higher to go through water?
And why sideways? :D How did you figure that out?
 

Hjalmark

Oldest boy alive
Ahh, interesting. Yeah I just tried again, definite improvement.
My Converter also only makes a very faint sound and doesn't seem to get hot (if anything mildly warm), I just unplug it at night (need to get an extension cord with a switch!).

You go lower for water? I thought it should be higher to go through water?
And why sideways? :D How did you figure that out?

Haha I just lower it to 6.8 but most of the time leave it on 7 for water
Yeah the 100 watt convertors all buzz, the bigger bulky ones do not I heard but I think I might just build a small wooden box around mine but maybe stick a thermal probe in it for first weeks of use for obvious safety reasons o

I lay it in the side so the heat travels up into the core instead of straight up in the air ;)

Rarely do it though as I have a grasshopper and stickybrick at hand but Enano is still my favorite

Only thing I don't like is the dry stem because I find it to dry and hot, I had some other DIY rigged stems that worked way better so one day I am either getting a Ed TnT stem or joda custom glass one .. or both :D maybe a 18mm glass one from joda and Enano stem from Ed TnT https://edstnt.com/product/eds-epicvape-e-nano-stems-eds-tnt/
 
Top Bottom