E-Nano from Epickai

hafalump

hafalump

Well-Known Member
:science:Welcome to nano world.
The wood is not changeable.
I have good success with my trim.
I use a JoDa carbed gong and drive thru water, at higher temps, like 8.
I take it all in one, like old school bong.
The custom gong is deeper, can hold twice the amount.
 
Jaindoh

Jaindoh

Well-Known Member
thanks!

how hot does the exposed metal at the top of the nano get? I'm mostly concerned about, if i need to change a bunch of bowls daily while it's still hot, burning the crap out of myself regularly. Obviously the top of the gog will be hot, but besides that?
 
ACE OF VAPE

ACE OF VAPE

Vape outside the box
Manufacturer
Just a quick update to all of you on here:

As you may have noticed from our website we are experiencing stock issues that have affected every customer order, Massdrop customers included. We believe in producing a solid handcrafted product and any unit or accessory that does not pass our final inspection is not sent out. I apologize for any inconvenience this has caused you. We are confident that all our customers would rather have a slight delay in shipping than a product that does not live up to its claims.

Anyone who currently has an order placed that did not just leave with the post person will be receiving a refund on their shipping charges and will ship priority mail as soon as possible.

RMA's are still on-hold and will not be processed until late next week, unless you are filling one out for an adjustable stem which I still (as of right now) have a few left.

If you have sent me an email and are wondering why I have yet to respond, please be patient as it is just one person and about 200 emails a day for the past week and a half. I promise I am not ignoring you and will respond as quickly as possible. Calls are answered generally between 10am PST and 5pm PST, if you are calling outside of those hours please be aware there is no one to answer them and I will respond to voicemail as soon as possible.

We value each and every one of our current and prospective customers and hope you will be patient with us as we continue to work through these delays. Andy will be back late next week and our production will be back in full swing.

Thank you!
Nadia
EpicVape
 
Hashtag46&2

Hashtag46&2

Trichome Technician
doubledown said:
Hey guys. I missed the Massdrop on the E-Nano and want to get a new one started. As many of you know about Massdrop, when a drop is requested again 200 times they contact the company about a new drop. Right now it is up to about 80 requests. These are just requests showing interest, not a promise to buy. Please go to this link and click request, so we can get this drop going again. Thanks!
https://www.massdrop.com/buy/e-nano-vaporizer-2?s=E-nano
Click to expand...
Just added my request also :D

I believe I was # 86

Lol...
This is most likely why EpicVape shelves are nearly ALL sold out.

Let's get it Dropped again guys!!
I want one sooooo bad.
 
flotntoke

flotntoke

thoroughly vaped
Jon Do said:
New user here, lurked a long time; usually I post on another forum's vape threads. I am seriously looking at an e-nano and had a few questions.

1) Is there any expectation on a time-frame for restocking? My birthday is at the end of the month, I get paid shortly after that; the storefront is completely out. I understand there was a massdrop recently, but the timing was off for me.

2) This is not my first vape, so the adjustable bowl concept makes sense. If I set the adjustable GoG bowl at a good efficient spot, how would that compare to a Solo PVHEGoG shorty, capacity wise?

3) Is it still possible to get new wood sleeves made? I may have to buy the cheapest e-nano and then, later on, get an exotic sleeve made. How much (past the cost of the wood) do these usually run?

4) Pursuant to #2: Good material is not available where I am at. Has anyone used one of these with lesser material? I am most concerned about burning myself from having to reload the GoG epeatedly.

5) Someone said the coupon code gave a lifetime warranty. After buying so many accessories and having my solo serviced repeatedly, this is very appealing. Is that still available?


Okay, I signed up for massdrop to bump this. The wait time is (sadly) an issue for me, but if the storefront doesn't restock by the time a drop is up it'll be a good way to save money.
Click to expand...

Think you got most of your questions answered, but a few additions....

  1. Time frame contact Epicvape. Only they know, and from the looks of things could be a little bit. @ACE OF VAPE is the man himself. See his post above.
  2. You have a good bit of room to set the screen depending on how deep your stem/GonG adapter is. On most of mine I can set as deep as on the solo glass stems. But, IMO most effecient is much smaller loads. Take a look around here for more info about this, but generally less is more with the nano. I like to load a smaller load and get 2-4 incredibly tasty hits, then reload. Depends on a few factors, but usually these loads are about 1/4 of what I put in a solo (full but not packed too tight).
  3. As @hafalump said, not really sleeves. nano can be made with many beautiful exotic woods, but once it is done - it's done. Could possibly send in later to have it "re-built", but most get a second nano instead or go exotic from the start. Best place to get wood is probably from @Snappo here at FC. His wood thread is here. Adds some cost, but makes for a gorgeous nano!
  4. Same as with any vape, lesser quality material is going to lead to needing more to get to the same place (same as smoking). Loading isn't really that difficult and with silicone sleeves on glass you have to be pretty careless to really burn yourself. Just be careful. You don't have to touch any metal or even hot glass. Basically, load into glass (easiest to use like a straw to suck up ground material), slide glass onto nano heat port (or slide port onto glass), enjoy, dump and start again.
  5. FCLOVE is the code. 10% off and lifetime warranty. Not sure how low massdrops went last time, but code kind of wipes shipping cost and a little more. So, plain nano kit right under $200. Strongly advise you add a GonG for water and an extra bag of screens (5 for $5). Also not sure how lifetime warranty goes with massdrops. I wouldn't extend them to it, but best to ask Ace.

GetLeft said:
Interesting. I set mine up around 8 once by accident (couldn't see the dial well enough) and got some charring. Since then I don't go above 6.5, and if I'm there, I draw slowly so as not to over cook.
Click to expand...

So many variables here. Their setting 8 may not be exactly the same heat as yours. Screen distance is very important here, as well as load size. Different strains vape differently, etc etc. Depending on set-up and other variables, you may get same vapor production at 6.75. Really hard to gauge it by someone else's nano unless they are side by side, and even then not too easy even if using except same material from same grind. Find your spot(s) and go with what you like. You can always try others and tweak whenever the mood strikes you!
 
Last edited:
thepinkservbot

thepinkservbot

Active Member
Well, me and my Nano have shared a lot of intimacy with each other and we've talked it over. I've spoken with my Nano's parents, and I've received their blessing. We're taking our relationship to the next level; we've ordered some JoDa glassware.

:love: gonna get a 18mm carbed GonG and an aromatherapy dish, they're gonna glow in the dark and be pretty... shit's gonna be tight, as they say in Save the Last Dance. :D
 
jkishmael

jkishmael

Well-Known Member
Well I just had my first date with Ms. Nano and wow, we hit it off well ;).

Fired it up with my D020 and I was blown away by the big milky hits. You folks were NOT lying, that's for sure and I think I'm going to love my nano!

I also enjoy using my stir n scoop vape tool. Nice little addition.
 
CarolKing

CarolKing

Singer of songs and a vapor connoisseur
@nadia_epic Thanks for the update and explaining the situation at Epic. We appreciate all your hard work. You have a tough job "holding down the fort." Most folks didn't realize what a small business it is. It's a growing company with lots of orders coming in - that's a good thing.:)
 
Last edited:
doubledown

doubledown

Well-Known Member
Well, at the moment I can't order an E-Nano since its out of stock. But I am sold on it as my next vape, so I put in an order for a custom straight tube and carbed gong from Joda :) What a nice guy to deal with! At least my Massdrop Crafty will be here in a week or so to hold me over!
 
Vapor King

Vapor King

Well-Known Member
doubledown said:
Well, at the moment I can't order an E-Nano since its out of stock. But I am sold on it as my next vape, so I put in an order for a custom straight tube and carbed gong from Joda :) What a nice guy to deal with! At least my Massdrop Crafty will be here in a week or so to hold me over!
Click to expand...


If it's the most current drop of craftys.....Estimated ship date is August 6, 2015.
 
Vapor King,
VANVAS

VANVAS

Well-Known Member
hafalump said:
Shout out to @nadia_epic . My brother in law purcashed a nano several months ago.
It was dead out of the box. He was so sad. I brought him my extra cord, and blammo, LOG.!!!
So,he just got around to email re faulty cord, and a new one is on the way.
Thank for epic service. :love:
Click to expand...
I've got same problem and a faulty stem and i wrote to Nadia from EPIC , after 1 week and i don't have any answer to my email...im waiting for!!!
 
Last edited:
Vapor King

Vapor King

Well-Known Member
VANVAS said:
I've got same problem and a faulty stem and i wrote to Nadia from EPIC , after 1 week and i don't have any answer to my email...im waiting for!!!
For me is not very fast CS !!
Click to expand...

ACE OF VAPE said:
Just a quick update to all of you on here:

If you have sent me an email and are wondering why I have yet to respond, please be patient as it is just one person and about 200 emails a day for the past week and a half. I promise I am not ignoring you and will respond as quickly as possible. Calls are answered generally between 10am PST and 5pm PST, if you are calling outside of those hours please be aware there is no one to answer them and I will respond to voicemail as soon as possible.

We value each and every one of our current and prospective customers and hope you will be patient with us as we continue to work through these delays. Andy will be back late next week and our production will be back in full swing.

Thank you!
Nadia
EpicVape
Click to expand...
 
FlyingLow

FlyingLow

Team NO SLEEP!
FYI I've been spinning a small drill bit in my stems between pulls, and it works fantastic to grab the material from the bottom, and bring it to the top. It is probably negligible difference, but feels like I push less material into and through the screen.
 
You must log in or register to reply here.
Top Bottom