Wonderful news! I assume the silicone turbo tubes that are the same size as the glass ones work? At least that would be cool?
Edit: I assumed all logs worked like the hi did, guess I have some learning to do
E-Nano from Epickai
Wonderful news! I assume the silicone turbo tubes that are the same size as the glass ones work? At least that would be cool?
Edit: I assumed all logs worked like the hi did, guess I have some learning to do
fregglepops
Well-Known Member
i too keep my load close to the heater. Then run her at about 6 and a smidge dry. Was doing 7.5 through water but my cat obviously didn't like it and knocked it over with the solo attached!!! I miss my nano....
I've had it for about an hour. First few packs were strong to start, quick to putter out. I'm getting used to everything, but I'm having a great time so far. It doesn't seem like it would do too well in a group setting, but a very solid personal piece. I plan to pick up a YQ42 to go with it.
The glass stems get VERY hot if you're going through a whole bowl in one session. I've nearly burned myself twice already and it ruined a baggie it came into brief contact with. It of course stands to reason that it would, but it still takes some getting used to coming from combustion or whip vapes. I imagine a wood or nylon stem would be a little better. I'll pick one up after I get my Chinese glass.
The GonGs are very nice. I'm not sure how I'm expected to adjust the position of the screen in my stems. They were inserted with the basket facing up. Like this: \_/ Instead of like this: / \ I'm afraid I'm going to pierce the screen if I try to pull it out with anything and I don't have any tool that is long enough to push it from the other side.
The whole unit is even smaller than I imagined. I looked up dimensions and watched some videos before it arrived, but it was still startlingly tiny. The location of the power dial is, as mentioned, frustrating. It's not a huge deal for me and it's kind of nice to pass around the power dial, but my windowsill is my preferred resting spot and the dial will pull it over if I let it hang.
I've been starting the dial around 6.5-7 and upping it slightly after each stir. No matter how high I raise the temp the ABV is never as dark as it was with the Haze. I'm going to see about making some ABV oil after I amass a bit of it. The vapor tickles my nose a lot more than combustion. Dryer air and all that, makes me excited to get some glass.
The glass stems get VERY hot if you're going through a whole bowl in one session. I've nearly burned myself twice already and it ruined a baggie it came into brief contact with. It of course stands to reason that it would, but it still takes some getting used to coming from combustion or whip vapes. I imagine a wood or nylon stem would be a little better. I'll pick one up after I get my Chinese glass.
The GonGs are very nice. I'm not sure how I'm expected to adjust the position of the screen in my stems. They were inserted with the basket facing up. Like this: \_/ Instead of like this: / \ I'm afraid I'm going to pierce the screen if I try to pull it out with anything and I don't have any tool that is long enough to push it from the other side.
The whole unit is even smaller than I imagined. I looked up dimensions and watched some videos before it arrived, but it was still startlingly tiny. The location of the power dial is, as mentioned, frustrating. It's not a huge deal for me and it's kind of nice to pass around the power dial, but my windowsill is my preferred resting spot and the dial will pull it over if I let it hang.
I've been starting the dial around 6.5-7 and upping it slightly after each stir. No matter how high I raise the temp the ABV is never as dark as it was with the Haze. I'm going to see about making some ABV oil after I amass a bit of it. The vapor tickles my nose a lot more than combustion. Dryer air and all that, makes me excited to get some glass.
Newcastle
Stoned!
Yes the glass gets hot and you kind of get used to playing hot potatoes....
When I first received mine I liked the stem. Now I don't touch it. The gong and the D020 with claisen is it for me. The screen can be used either way I think but I use the top of the screen not like a cup....make sense? The most used tool I think is a chop stick. You can use something else but they work great for adjusting and replacing the screen. I use mine at 6.80?
ish. and don't change the temp. Maybe I should? Have fun with your learning process!
I am!
When I first received mine I liked the stem. Now I don't touch it. The gong and the D020 with claisen is it for me. The screen can be used either way I think but I use the top of the screen not like a cup....make sense? The most used tool I think is a chop stick. You can use something else but they work great for adjusting and replacing the screen. I use mine at 6.80? ish. and don't change the temp. Maybe I should? Have fun with your learning process! I am!
Mrmrmrmr
Well-Known Member
@ACE OF VAPE , are you putting any new exotics on the website ? Been without enano for almost a month and already I'm itching to buy another one. Can't live without one 
Maybe w
Maybe hit up @Snappo
@ACE OF VAPE , are you putting any new exotics on the website ? Been without enano for almost a month and already I'm itching to buy another one. Can't live without one
Maybe hit up @Snappo
fregglepops
Well-Known Member
here here!!The stand's cool
What about all aluminum?The stand's cool
Mr. Gweilo 420
Dude
I like it. I love the stand but I am kinda obsessive about stuff matching so if matching wood was out of the question I think all aluminium or even some form of Blackwood would be cool.
fregglepops
Well-Known Member
Haven't been caught up properly. In batches? Will there be a batch of maple?
Yes, maples and fiddleback maples next week...
fregglepops
Well-Known Member
Sweet man. I'll give you a shout.
biohacker
HREAM
@ACE OF VAPE , are you putting any new exotics on the website ? Been without enano for almost a month and already I'm itching to buy another one. Can't live without one
You're hilarious man....we are much alike! I too want an exotic or at least a second Nano. Love the Herbalizer, but Nano is like my first born child (even though i'm childfree lol) and will always be my favourite best bang for the buck simplicity log vape. I love my Herbie, but I still LOVE MY NANO!
Mrmrmrmr
Well-Known Member
I miss the white wall buddy ( @biohacker ). Amen to what you said,maybe our kids can get together for a play date 
nihil
Member, Known Well
Will the stands work with the old style cord? I'm assuming your serial numbers are date sequenced, and I'm also assuming mine was manufactured in January of 2014 if that helps.
If not, it looks like I'll need another enano to go with the stand.
How much does it cost for his wood? The most I want to spend on a nano is $230ish
I liked the koa on the EV site, the fiddle back maple is appealing because the price... I think I would be happiest with something from snappo... How exactly do you go about ordering between snappo and the EV website?
Also what's the word on the two different EV stores? Shop.epicvape, and build.epicvape? I already made an account at shop.epicvape.
Gray Area
Well-Known Member
It's dead easy:
Order a "your wood, our nano" from Epicvape and get the order number from the confirmation mail etc. Buy a blank from @Snappo and give him that number, he then ships your blank direct to Andy including your order number... all done
As long as it has the cork pads
Rrose Selavy
log enthusiast
Seren
Away with the fairies
![:\](/i/s/hmm.gif "Hmm :\")
.... I personally think @Gray Area 's idea of putting a metal plate underneath the wood (& of course - cork pads! ) is a really good one. The stand would then echo the design of the Nano, which we all clearly love so much. Just my 
............ 
Thanks for this, I'm sure it will make more sense when I see it. But you're trying to say if I. Use a hi stem I will have to keep the load closer to the heater to make up for the ridge?
Does anyone use the stock gongs? It seems like nobody uses them so I didn't buy one.
al bundy
Vaporist
I started with half a chopstick but I have moved to a new tool.
I know theres a specific use for it.
That is a screwdriver from an eyeglass repair kit. At a cash register near you.
I use it with my Nano and HI.
Rrose Selavy
log enthusiast
@exit you will just have to hold your hi stem at whatever your preferred distance is. you can get as close to the heater as you want. the nano wand (at least the ones i have) only allows you to get so close. this allows you to use it with one hand if you want. the wand can sit on the heater and there will still be a couple of cm between the heater and the screen in your wand. 
