Good idea! Actually, I believe a small suction cup would fit into the keyhole. I'll run out later and see how one from the hardware store fits!
E-Nano from Epickai
Good idea! Actually, I believe a small suction cup would fit into the keyhole. I'll run out later and see how one from the hardware store fits!
Hey guys!
Check out my new prototype PWM case - complete with a notch to hold a rubber band (rainbow loom size bands), and a keyhole in the bottom for hanging the controller from a screw.
Need to make the cable path a little larger, but it's nearly complete!
That's great! Good job! The keyhole idea is nice, and will be even nicer if it does fit a suction cup.
A base with holders for stems would be cool and maybe a stash spot.
Sadly a whole base station is a bit too big for my 3D printers to handle currently (but with the way business is going, maybe not for long!). I am seriously considering a milling machine so I can begin making larger base stations for numerous vaporizers.
Keep pushing me guys! This PWM case was simply a customer request, I never thought I'd get this far with my CAD skills this fast!
Reflections
Well-Known Member
Great job Ratchett!!
@Ratchett, @ACE OF VAPE and @Snappo . The 4 of us should put our heads together and so some sick ass limited edition collab "super enano". Just a thought!
Auction it off for some sort of good cause or something.
Auction it off for some sort of good cause or something.
KidFated.
Unknown Member
LazyIdol
Well-Known Member
Hey FC, hope everyone enjoyed their weekend!
While initially I disliked using my d020 with the e-nano I have found that with a claisen on top it has a good volume that is good for smaller hits. I also threw in a piece of cotton to absorb resin but accidentally combusted due to knocking the power up to 9 this morning and had to throw the cotton out due to taste. Just ordered one of those extension cables though so hopefully that wont happen again.
I have been messing around with my webcam and I might upload an e-nano video later in the week, assuming Im not too busy and can figure out a good tripod setup
Have been looking into locally available solutions for how to keep my e-nano moisturized and ran across this link: http://www.101cookbooks.com/archives/spoon-butter-recipe.html.
It looks attractive to me because it uses coconut oil instead of mineral. What do you guys think?
While initially I disliked using my d020 with the e-nano I have found that with a claisen on top it has a good volume that is good for smaller hits. I also threw in a piece of cotton to absorb resin but accidentally combusted due to knocking the power up to 9 this morning and had to throw the cotton out due to taste. Just ordered one of those extension cables though so hopefully that wont happen again.
I have been messing around with my webcam and I might upload an e-nano video later in the week, assuming Im not too busy and can figure out a good tripod setup
Have been looking into locally available solutions for how to keep my e-nano moisturized and ran across this link: http://www.101cookbooks.com/archives/spoon-butter-recipe.html.
It looks attractive to me because it uses coconut oil instead of mineral. What do you guys think?
photobooth
Well-Known Member
My E-Nano is out for delivery, fingers crossed it's waiting at my door when I get home from work today! Can't wait to join the E-Nano club!
DonDizzurp
ELEVATED
Any reason why the latest revisions have soldered wires rather than crimped wires? @ACE OF VAPE
Anyone have pictures to compare? I tried looking through this thread but didn't find anything.
Anyone have pictures to compare? I tried looking through this thread but didn't find anything.
GrilledGoat
New Places
I had to order a replacement 19mm Adjust-a-bowl GonG as I broke my first one....
The replacement does not work at all. I have to hold the enano so that it doesn't fall onto the load. The heater does not stop where it would normally and just continues to go until it hits the screen.
Confused.
The replacement does not work at all. I have to hold the enano so that it doesn't fall onto the load. The heater does not stop where it would normally and just continues to go until it hits the screen.
Confused.
Last edited:
Sounds like a defective GonG, contact EV and have it replaced. I personally only use GonGs made by @VaPeD&CoNfUsEd
vapordab
Medical+FC=Recreational
thats the exact opposite problem I have with my newly recieved gong. Mine won't fit over the heater at all. Luckily Andy seems like a great guy who's willing to replace it easy peasy. Makes me feel even better about my purchase. Looking forward to using my new nano!
weenstoned
Well-Known Member
My gong is also messed up but still usable. It is too loose and wiggles in the joint. Side by side with regular GONG joints you can see it is smaller than it should be. Can't wait for my order from @VaPeD&CoNfUsEd .
Newcastle
Stoned!
The claisen on top works great! I would suggest ordering screens for the Extreme Q. The basket ones that look like a heavy duty Enano screen. Put it on the bottom of the gong and it will keep the claisen and water cleaner. Keep a baby food jar with a little alcohol in it, you will need it. I use this for all my screens. I just rotate them out. But wait before you take the Q screen and throw it in the alcohol scrape it off and vape that again!
It is really sticky and you can only scrape once and in the jar it goes. You can use anything as far as finish. I use Pure Tongue Oil and put one drop on my finger and work it in. ."Flos" just came in the mail today. The pictures on the website certainly don't do the wood justice! While I haven't been able to test out the true potential of the nano, I did load a small ~ .01 amount and got a nice buzz on two different occasions off it. Can't wait for my partner to get back at 9pm for Flos to really shine!
(also, going to get a d022 under ataxian's suggestion for a nice piece to pair with the nano)
(also, going to get a d022 under ataxian's suggestion for a nice piece to pair with the nano)
DonDizzurp
ELEVATED
@LazyIdol ~ have you tried Ed's Bomb AssButter? He knows his wood, and I wanna spread his ass butter on everything
...I could not resist
NO TOUCHING!
I ordered a Walnut E-nano on Thursday last week. I'm still waiting for it to be processed but I'm worried I may have ordered from the wrong url. There are three different urls to access the epic vape site.
There's epicvape.com, build.epicvape.com, and shop.epicvape.com. I used the latter, as it was the first result when I Googled epic vape. The confusing part about this is the three sites don't share the same usernames/emails when you choose to register. It took me 10 minutes to figure out why my username and password weren't working when I went to check my order status.
I just want to make sure my order isn't just floating out there as the money has already been pulled from my account. Thanks.
There's epicvape.com, build.epicvape.com, and shop.epicvape.com. I used the latter, as it was the first result when I Googled epic vape. The confusing part about this is the three sites don't share the same usernames/emails when you choose to register. It took me 10 minutes to figure out why my username and password weren't working when I went to check my order status.
I just want to make sure my order isn't just floating out there as the money has already been pulled from my account. Thanks.
Toastface_Killah
Well-Known Member
Wow 
Couldn't even finish the second stem with my partner last night. We had problems getting any noticeable exhaled vapor, but the vapor really started coming once the wood of the nano got to a nice warm temperature. Must have just needed some extra warm-up time.
Couldn't even finish the second stem with my partner last night. We had problems getting any noticeable exhaled vapor, but the vapor really started coming once the wood of the nano got to a nice warm temperature. Must have just needed some extra warm-up time.
max
Out to lunch
The wood getting warm is a reflection of the temp, after it's been on a while, but it doesn't have to be hot to provide vapor. It's not a part of the heat production or retention process. OTOH your initial lack of vapor could be due to just not waiting long enough for the vape to reach vaping temp. Some vape models can reach vaping temp within seconds, but this isn't one of those. It does take a few min.
fregglepops
Well-Known Member
My GonG arrived so I unpacked my nano cause it needs Andy's knowledge. It still works but as I have now realized it is now gonna be spending most of the time upside down. Pure EPIC vapour. Love it so much I now am reluctant to pack it away across the pond. Tbh I want it here so I can toast independence come Friday! Hehe ;-) but common sense has prevailed and um coddling her in bubblewrao tonigh. Gonna miss my we Netty Nano
Seren
Away with the fairies
I feel your pain - I don't know what I'd do without my Nano for more than a few days... & I'm sure your darling Netty will miss you too
(On the topic of independence - PLEASE STAY! - your Celtic cousins need you! Without you we'll be condemned to a Conservative government forever!
)Thinking about grabbing a Cherry E-Nano. I'm having trouble justifying it over an Underdog Birthday Vape ($160, comes with 4 stems of your choosing). Other than DC power (and the car adapter), what are the main differences between the two? People say go with the E-Nano over the UD, but I can't find much justification as to why. Especially when the UD presently offers more bang for my buck.