E-Nano from Epickai

[Delta3DStudios]

Awesome ideas ratchet, do you think you could make an oval or rectangular case that worked like a dugout, it would have storage on one side to hold one or two nano stems, then a pivoting (vented) lid that would cover the hot heating element and hold the spare stems in place. It would be extra cool to have it in matching wood entire. Here's a pic of a dugout, In case anyone has forgotten what they look like, just imagine it bigger (nano size) with the bigger side being the heating element, and smaller side stem storage. I really want this case for my solo to make it truly portable, but that's another thread.

.

I'm sure it's possible - though my faux wood grains would be horizontal, not vertical like that piece. Sadly, composite wood is brittle and a PITA to work with, Plastic would be a piece of cake (and the prices on my store will reflect that). Currently I'm having trouble keeping the feed going into the printer with this wood composite.

PM if you are seriously interested in a custom case like this, the design is very simple (and could be improved of course).

 

[nordy_2013]

I purchased an e-nano from Epicvape almost three weeks ago. After two weeks of waiting, I called USPS about the issue, and they said that the package was sent to the product recover warehouse or something because the label was likely unreadable on the box, and that it would take up to two months to locate the package (if even found), and then would then be returned to Epicvape.

I emailed Epicvape about the issue to see if we could work out something about the package being lost last Thursday afternoon. It's now Monday evening and still haven't received an email. I'm pretty disappointed in the entire ordeal and really don't know what I'm supposed to do at this point.

 

[Delta3DStudios]

Sorry to hear that - @ACE OF VAPE will eventually take care of you - just send him or Nadia another nagging email every few days until you hear back from them (or sometimes a PM here works).

Sometimes it's hard to be patient, but trust us - good things come to those who wait!

(Welcome to the site! )

 

[Snappo]

I purchased an e-nano from Epicvape almost three weeks ago. After two weeks of waiting, I called USPS about the issue, and they said that the package was sent to the product recover warehouse or something because the label was likely unreadable on the box, and that it would take up to two months to locate the package (if even found), and then would then be returned to Epicvape.

I emailed Epicvape about the issue to see if we could work out something about the package being lost last Thursday afternoon. It's now Monday evening and still haven't received an email. I'm pretty disappointed in the entire ordeal and really don't know what I'm supposed to do at this point.

This is an unusual situation that unfortunately was out of EpicVape's control. Trust that Andy will make this right - he is a good honest businessman that truly cares about your ultimate satisfaction ...and the E-nano is worth your patience. It'll all turn out better than good!

 

[mtnberner]

Ratchett, I think I found a drill press I can borrow (won't be as nice as a 3d print) and I can get a 4x4 block of wood and bore an e nano size hole in it ( I might even drill a hole on the horizontal so the cord could plug in and still be operational). I would love to have you make a case but its probably more then I can afford at this time. Thanks

 

[TeeJay1952]

@ nordy_2013 Go to page one of this forum. Point mouse at Ace of Vape icon (author of message 1) Left click and choose Start a Conversation. When Andy logs on he will get your message. No amount of hounding can make a cheat honest. Andy is honest.

 

[Tweak]

@Tweak Pics?

Like I said, pretty simple. Just a metal screw hook in the ceiling + bungee cord holding the power cord from above.

Now it is impossible for the cord to fall off the desk like before and pull the nano + bubbler with it.

I tried adding rubber feet to the dimmer to keep it from sliding but it didn't help much.

 

[nordy_2013]

Thanks everyone for the quick replies.

I messaged ACE OF VAPES through this website about the problem. Hopefully he will respond soon and we can work something out.

I understand that this is likely not Epicvape's fault. I've just become pretty frustrated with the entire situation and do not want to see a $250 purchase be lost in the shipping process.

 

[fregglepops]

I too suffer from falling nano syndrome. The dial pulls the cord abd my nano tips over 90% of the time. Not a gripe persay but mibbe worth noting for future design tweaks. Still love my nano and will be buying a backup as soon as finance allows. I'm a man of few ideas so it's good to see and hear and possibly ahem borrow some of them. My nano ain't that old but she's got battle scars. Big dint in the wood round the rim. But makes me love her more. 7am in fraggle rock and my 3rd load just bit the dust. Gonna be a long day. Anyway I got to thinking that maybe turning the power inlet 90 degrees so it is horizontal might be an easy and quick design revision if @ACE OF VAPE is wantin my 2 cents worth? I reckon if your cord was going in that way instead of how it is now that not only would it reduce tipping but may also help balance it . I dunno I'm melted.

 

[snackmaster]

These things do a pretty good job of keeping the nano upright. Let you keep some tools handy too.

 

[biohacker]

My Nano falls over obnoxiously all the time, and will hardly stay upright when plugged in.
Did his simple recommendation to switch and re-solder the wires help?

I would love it if mine did not fall over so damn easy, any other suggestions y'all?

I didn't flip the wires. I have worked around the falling over all the time and now it happens alot less, i'm just more cognizant of it and other stuff around it. The other day it happened in slo mo....Cloud (older steel one) knocked the Nano over which was being used for aromatherapy and the glass bowl broke. I love how rugged the Nano is so when it is knocked over it's bombproof with no worries. The Cloud on the other hand.....at twice the value, yikes.

 

[Toastface_Killah]

Sitting in class and all I want to do is go home to be with my Nano...I got it in the mail yesterday and am completely floored (figuratively and literally) by how big of clouds I'm getting from such tiny loads, especially having just switched from the behemoth stash-eating SSV! I'm so infatuated with this thing that I'm already debating buying a spare sometime...

 

[fregglepops]

Sitting in class and all I want to do is go home to be with my Nano...I got it in the mail yesterday and am completely floored (figuratively and literally) by how big of clouds I'm getting from such tiny loads, especially having just switched from the behemoth stash-eating SSV! I'm so infatuated with this thing that I'm already debating buying a spare sometime...

Welcome to the gang!

 

[Gamehenged]

In researching Vaporizers I started looking around the sub r/Vaporents on Reddit. This initial research led me to you fine folks here so I've been lurking for a bit. Well I finally registered to show off my E-Nano in Fiddleback Maple I received a few weeks ago. This is my first vape for flower so reading through this site has been a learning experience. Based on your fine comments I went with the E-Nano with absolutely no regrets.

I love the figuring of the Fiddleback maple. It's like a fine piece of furniture.

The striping actually changes a little in the light as you turn it. So Cool.

I don't think I need to tell you how well it works. I'm just a little new at this type of partaking so I'm still working on my technique. I'm also definitely considering one of Joda's or Ed's stems.(Why not both :-D )

Many thanks to @AceofVape for the fine quality piece. I purchased some good ol' USA made glass that's being shipped from the west coast. I should be here at the end the week. Cant wait to put this through some water tests. I'll be sure to post a glamour shot when it gets here.

 

[Delta3DStudios]

Welcome to the site! You made a fine choice for your first flowers vape! If only all of us were as wise with our first vape purchase, we might have saved a bunch of $$$$!

Nice choice on the fiddleback maple, it's gorgeous!

 

[Snappo]

In researching Vaporizers I started looking around the sub r/Vaporents on Reddit. This initial research led me to you fine folks here so I've been lurking for a bit. Well I finally registered to show off my E-Nano in Fiddleback Maple I received a few weeks ago. This is my first vape for flower so reading through this site has been a learning experience. Based on your fine comments I went with the E-Nano with absolutely no regrets.

I love the figuring of the Fiddleback maple. It's like a fine piece of furniture.

The striping actually changes a little in the light as you turn it. So Cool.

I don't think I need to tell you how well it works. I'm just a little new at this type of partaking so I'm still working on my technique. I'm also definitely considering one of Joda's or Ed's stems.(Why not both :-D )

Many thanks to @AceofVape for the fine quality piece. I purchased some good ol' USA made glass that's being shipped from the west coast. I should be here at the end the week. Cant wait to put this through some water tests. I'll be sure to post a glamour shot when it gets here.

Welcome to the FC round table! And congratulations on your BEAUTIFUL Fiddleback Maple E-Nano - you're going to love it for a long long time!!!

 

[Tweak]

The Cloud on the other hand.....at twice the value, yikes.

You mean at twice the cost, .

One of the reason I sold my cloud, didn't like stressing over the possibly of damaging it.
No worries with the nano. And it is so much easier to store.

having just switched from the behemoth stash-eating SSV! I'm so infatuated with this thing that I'm already debating buying a spare sometime...

Have you thought about the VB mini wand? Same size as a nano stem, uses nano screens for nano size loads, but it works with the SSV. Or you can also use your nano stem on your SSV.

VB mini on left, e-nano stem on right

 

[Throw away lighter]

Just received my e nano the other day, wow! Quite possibly the best vape ever, I'm very impressed with the quality and level of finish. It's just so pleasing to hold.
I live in the UK and it was with me in two weeks. A mistake was made with my package's shipping, I was overcharged and I'm still waiting on Nadia to get back to me but that hasn't tainted my experience.
Still a pretty happy customer.

 

[Reflections]

@ Throw away lighter ...We want pictures lol...welcome to the nano family and FC!!

QGamehenged..welcome also..beautiful nano you got there!! I love both my eds stem and joda's

 

[Caligula]

Why add water to the mix? Doesn't water just dilute the alcohol and reduce its solvency?

Indeed it does, and I see no purpose to this unless hes using a really small amount of alcohol and stretching the volume with water in an effort to conserve... but iso is so ridiculously cheap.

 

[Vapour Clown]

Lovin' the crap outta my Nano. It pretty much took over being my daily driver the day I received it

Currently using this as my Nano setup until my D022 arrives from China. Works a charm

 

[Gray Area]

@Vapour Clown love the Tardis biscuit barrel... is it bigger on the inside?

The nano truly shines through water imo. I think I've only used the dry stem three or four times in all... water constantly
I've come to the conclusion that using the nano isn't very efficient with the herbs for me. It's not that I'm not getting mashed from small loads or the the efficiency as such, just the thing tastes so good that I have the urge just to keep hitting it over and over 2-3 hit loads... I haven't tasted burnt popcorn since getting my nano...

 

[biohacker]

Totally agree, the vapour quality is extremely high through water...thick and smooth...much more than my Cloud. It is extremely addictive! I love the purity!

I still use the dry stem constantly for flavour country....it really is something else.

Thinking about buying an exotic....to put on the subwoofer in the family room, mainly for aromatherapy, but also for convenience! I love how Nano's look like little bluetooth speakers!!

 

[Gray Area]

Thinking about buying an exotic....to put on the subwoofer in the family room, mainly for aromatherapy, but also for convenience! I love how Nano's look like little bluetooth speakers!!

Tell me about it... The nano seems to have very nicely cured my VAS, but it seems I've contracted NAS in the process

 

[Snappo]

Olive Wood E-Nano 14mm wong by Ed's TnT!