E-Nano from Epickai
Toastface_Killah
Well-Known Member
How hard is the draw on these when used with an 18mm adapter? I'm debating branching out from just my SSV; I was looking at log vapes but traditional ones heat up times is what made me look into this instead..
The reason I worry is just because I've had a lot of experience with certain vapes in comparison to the SSV that require a hard pull, especially with water pieces (which I always use) like my Solo with the high temperature o-ring added; this negative is a no-no for me because I have wussie/weak ears and sinuses that get strained easily from pulling hard as hell with certain vapes
The reason I worry is just because I've had a lot of experience with certain vapes in comparison to the SSV that require a hard pull, especially with water pieces (which I always use) like my Solo with the high temperature o-ring added; this negative is a no-no for me because I have wussie/weak ears and sinuses that get strained easily from pulling hard as hell with certain vapes
fregglepops
Well-Known Member
non existent really IMO Just ordered a 19 mm GonG from andy will I need anything else for it to work with my nano and this? Any other suggestions?
http://www.dhgate.com/store/product/11-quot-honeycomb-disk-bong-with-9-am-tree/178555115.html or leaning heavily toward this onehttp://www.dhgate.com/store/product/g18-two-functions-glass-water-smoking-pipe/184857976.html After hearin my missus hackin her lungs up I just went and ordered a D020!!!
Last edited:
Tweak
T\/\/34|<
IMO, the nano is right between the Solo and the SSV. Not as easy as the SSV, but not nearly as hard as the Solo. Really depends on how much you pack in the Stem/GonG. They will not fit even half of what the SSV can hold.
But getting away from the Whip + Water pipe is totally worth it.
I've said it before, they are both great vapes that really compliment each other.
Have you seen this LSV mod? I've thought about attempting it with my SSV so it could use the nano stem too.
excalibunny
Member
Not sure what this means.
I've heard nothing but good things about the e-nano from reddit.com/r/vaporents and bought it last night. I've heard this is the place to go if you want to talk about it.
I'll definitely check out the FAQ. Thank you for being so welcoming.
It is indeed a unique piece of walnut that is close to the edge of the tree, giving it the two tone appearance. I have a few two-tone Nanos from this tree, the fiddlebacking was just a bonus on your piece.
There is a new fiddleback available on the website. It is a dark reddish one, very different from yours.
BTW here is the first Cocobolo Nano. I call it the screamer for obvious reasons.
Wow, part of me is wishing I got one of the unique pieces like this.
Last edited by a moderator:
TeeJay1952
Well-Known Member
I just meant that there isn't an authority but rather a gathering of like minds. Your information is as valuable as mine. And in light of my inability to express myself perhaps more so. Welcome to the club.
excalibunny
Member
Gray Area
Well-Known Member
fregglepops
Well-Known Member
oh how true......trying to talk the wife into it!Ahh, don't sweat it... you'll want a second nano in no time
fregglepops
Well-Known Member
Hate doing back to back posts but this is niggling away........I ordered the much acclaimed D020 from sunshine store on dhgate,but then remembered @ataxian said the D022 was better for the nano. Alll i'm asking in a very long winded fashion is........will the D020 still be a decent enough set up for herb and nano use? I have a solo but my everyday is the nano
ataxian
PALE BLUE DOT
The D020 pairs very well with a SOLO.
If I'm already setup and i need to use the NANO I add a caisen and a ash collector and the D020 works well with the NANO.
You could just have one bubbler and add to it like a Lego set!
The D 022 I just use it as it comes however I don't use it with the SOLO!
What I do works for me and not èveryone likes what I do!
The D020 is a cheap piece of glass.
Work with it!
excalibunny
Member
http://www.brotherswithglass.com/HVY-Glass-11-In-Straight-Water-Pipe-Fumed-p/bwg-hms2.htm
Would this work with the e nano and gong?
Would this work with the e nano and gong?
Last edited:
ataxian
PALE BLUE DOT
Very expensive?
Last edited:
excalibunny
Member
ataxian
PALE BLUE DOT
You need adapter to connect it!
excalibunny
Member
The gong or something else? Sorry, I'm a bit clueless.
Edit: just realized I posted the wrong link up there. This is the correct link
http://www.brotherswithglass.com/HVY-Glass-11-In-Straight-Water-Pipe-Fumed-p/bwg-hms2.htm
Last edited:
ataxian
PALE BLUE DOT
Your bong has a male you need a adapter or a female gong.
Bring your glass piece (all clean) to the local smoke shop that carries glass fittings and they will tell you what you need?
KidFated.
Unknown Member
Just a 14mm gong
Dude! The D020 is an amazing piece - very nice thick glass. It has very minimal diffusion which means it will retain the flavor much better. Remember - more diffusion = less flavor.
I love switching back to my original D020 every other month with my E-Nano. It's very easy to white-wall the entire D020 can at 6.5
Don't worry, you'll love your purchase. Later you get bored of the D020 you can buy something else to switch it up like I do. It's fun to have a few different pieces to enjoy based on my mood. And the fact I spent less than $300 on my collection so far has made it MUCH more enjoyable!
LazyIdol
Well-Known Member
Hey guys, after EXTENSIVE testing yesterday I am sober enough to post some pictures of my new exotic Big leaf maple burl enano!
Sorry for the huge pictures!
So far I am loving the e-nano. Coming from a solo as my daily driver for the past 14 months the draw rate is super awesome and I find myself constantly following the different grain patterns in the wood. I have been using @Caligula 's 2 hit technique from his video playlists with great success!
My thanks go out to @Snappo for providing this awesome piece of wood. I was out of town and communicating entirely on mobile but he was quick to reply to any questions and provided additional pictures of the piece of wood I selected. He shipped first thing on a Saturday to Andy and overall I had a great experience.
Great job @ACE OF VAPE!
Sorry for the huge pictures!
So far I am loving the e-nano. Coming from a solo as my daily driver for the past 14 months the draw rate is super awesome and I find myself constantly following the different grain patterns in the wood. I have been using @Caligula 's 2 hit technique from his video playlists with great success!
My thanks go out to @Snappo for providing this awesome piece of wood. I was out of town and communicating entirely on mobile but he was quick to reply to any questions and provided additional pictures of the piece of wood I selected. He shipped first thing on a Saturday to Andy and overall I had a great experience.
Great job @ACE OF VAPE!
Wow!!! So richly detailed, toned, and unique with special character ...there will never be another like it!!! ENJOY!!!
Last edited:
You guys are driving me crazey with these exotics... This forum is not good for me. I came here looking for a cheap good Vape and now I have a list of things want that add up to half a grand.
Some how I will get an exotic nano, a dhgate water pipe, and a glass vaporgenie sherlock in my possession... When.... Idk...
I have mlfb that tastes too much like wood to get enjoy, and the top of an old VG attached to a cheap old style glass waterpipe (w/ no water) as my daily driver. Honestly the VG blows me away compared to the mlfb.
Some how I will get an exotic nano, a dhgate water pipe, and a glass vaporgenie sherlock in my possession... When.... Idk...
I have mlfb that tastes too much like wood to get enjoy, and the top of an old VG attached to a cheap old style glass waterpipe (w/ no water) as my daily driver. Honestly the VG blows me away compared to the mlfb.
