E-Nano from Epickai

E

EveryDayAmnesiac

Well-Known Member
Enchantre said:
I heard that as well. I think someone might have swapped out my audio file.... LOL!

Yeah, it's amazing how much that comes back when I'm medicated. It's been 15 years, for crying out loud! and, I wasn't even born there! When I lived there, everyone complained that I had a California accent!
Click to expand...

Oh, your video review was *super good* doncha know! We should celebrate by making a hotdish, and maybe some lutefisk!

Honestly, it took, maybe, 5 seconds before I heard the accent.

I too have spent some time in Cali (appx 5 years, thanks to nepotism) and was made fun of anytime I left the house.

Living now in the Southeast, I miss the Minnesota accent more than anything. Luckily, there are a few old "halfbacks" with whom I can associate, but for the most part... it's that goddamn Smoky Mountains accent. :disgust:
 
Enchantre

Enchantre

Oil Painter
Dear G-d... NOT Hot Dish!!!

woman-screaming.jpg


I've had Lutefisk. Once. It was enough. I am, however, quite skilled in Lefse making.

Again, the Nano brings out the midwest in my voice...
 
L

llamaman001

Well-Known Member
Mine took right at about 3 weeks from the time I ordered until I received (still says out for delivery!) it. I live in the US.

I ordered on the 1st at 2:30 in the morning.

I know ACE of vape said that he was busy filling massdrop orders and with 4th of july but now that that is over production should be back to normal.

Id say a week to 2 weeks max? But Im not positive on this.
 
P

Propaganja

Well-Known Member
Grimkrum said:
When did you order? I ordered Monday. What is the normal time I should expect before shipping. I am getting anxious.
Click to expand...
same here, i ordered thursday and on the site it still says processing =(.. ace of vape said 48 hours or something like that there is a backup??? very disappointed
 
Propaganja,
JeeSee

JeeSee

Cultured Curmudgeon
I am SO JEALOUS @llamaman001 , I'm still waiting for mine (the USPS tracking updated twice... only to stay 'Customs Clearance' over again). Forget BC and AD, I think my life is going to be firmly divided into BE (Before E-nano) and AV (After Vaped). I wish I could break into the customs office and claim what's mine. :ninja:
 
ataxian

ataxian

PALE BLUE DOT
JeeSee said:
I am SO JEALOUS @llamaman001 , I'm still waiting for mine (the USPS tracking updated twice... only to stay 'Customs Clearance' over again). Forget BC and AD, I think my life is going to be firmly divided into BE (Before E-nano) and AV (After Vaped). I wish I could break into the customs office and claim what's mine. :ninja:
Click to expand...
6VQR2cV.jpg

Your going to love the flavor profile!
I normally use a water path.
Today with all my remoldling it's easier to setup dry sessions.

I only needed level 6?
Maybe 5 next time?

I hope this is your week to experience NIRVANA NANO STYLE!

NNS
 
Grimkrum

Grimkrum

Well-Known Member
Propaganja said:
Nope, I trust him so didn't want to bother and was giving him "leeway" lol but I guess I should have through it in there lol
Click to expand...
Oh yeah I in no way was questioning his ethics or anything just anxious! So excited to get my hands on this thing!!!
 
Grimkrum,
Grimkrum

Grimkrum

Well-Known Member
Reflections said:
“Patience is bitter, but its fruit is sweet.”
― Aristotle

“He that can have patience can have what he will.”
― Benjamin Franklin

The strongest of all warriors are these two — Time and Patience.”
― Leo Tolstoy, War and Peace

Ok I'll hush...lol
Click to expand...
I am inspired with a new sense of forbearance. You may have just changed my whole life. The internets be amazin.;);)
 
Delta3DStudios

Delta3DStudios

Well-Known Member
Accessory Maker
Heh, oooo yeah - new Afzelia burl nano has arrived!!!! She's absolutely gorgeous! I was hopeful to take pictures after work out in the sunlight, but unfortunately a storm rolled through and clouded out the sun!

I'll be sure to post pictures tomorrow when the sun comes out

Also FYI regarding the Aromatherapy cup (http://www.epicvape.com/index.php?route=product/product&path=62_64&product_id=108) - I ordered this with my nano. For those that might not be aware - the base is a 19mm male GONG with a bowl shape on top.

The cup does NOT fit the Nano like a normal nano stem. It rests precariously on top of the heater port - and can be partially knocked over (but only until it hits the outer wall of the nano which is about a 25 degree angle) - sure you can balance the cup on the nano's inside stem and it seems to be working well (haven't used true essential oil yet, using some diluted 0% nicotine watermelon flavored e-juice for testing tonight). But I don't like the loose fit of the cup.

Perhaps @VaPeD&CoNfUsEd can make a better fitting aromatherapy cup (maybe I'll save that for custom order #3? ha ha)

image-350x350.jpg


Shame too - I really like the idea of tossing a pre-filled aromatherapy cup on top of my Nano after a session to help with the odors (my wife practically loathes the smell of cannabis - especially in the early mornings)
 
Last edited by a moderator:
ataxian

ataxian

PALE BLUE DOT
Reflections said:
“Patience is bitter, but its fruit is sweet.”
― Aristotle

“He that can have patience can have what he will.”
― Benjamin Franklin

The strongest of all warriors are these two — Time and Patience.”
― Leo Tolstoy, War and Peace

Ok I'll hush...lol
Click to expand...
Dhgytaw.jpg

PERSEVERANCE
Ratchett said:
Heh, oooo yeah - new Afzelia burl nano has arrived!!!! She's absolutely gorgeous! I was hopeful to take pictures after work out in the sunlight, but unfortunately a storm rolled through and clouded out the sun!

I'll be sure to post pictures tomorrow when the sun comes out

Also FYI regarding the Aromatherapy cup (http://www.epicvape.com/index.php?route=product/product&path=62_64&product_id=108) - I ordered this with my nano. For those that might not be aware - the base is a 19mm male GONG with a bowl shape on top.

The cup does NOT fit the Nano like a normal nano stem. It rests precariously on top of the heater port - and can be partially knocked over (but only until it hits the outer wall of the nano which is about a 25 degree angle) - sure you can balance the cup on the nano inside stem and it seems to be working well (haven't used true essential oil yet, using some dilluted 0% nicotine watermelon flavored e-juice for testing tonight). But I don't like the loose fit of the cup.

Perhaps @VaPeD&CoNfUsEd can make a better fitting aromatherapy cup (maybe I'll save that for custom order #3? ha ha)

image-350x350.jpg


Shame too - I really like the idea of tossing a pre-filled aromatherapy cup on top of my Nano after a session to help with the odors (my wife practically loathes the smell of cannabis - especially in the early mornings)
Click to expand...
My wife loathes the smell of cannabis anytime of day or night. At night I need to use a wax pen which doesn't bother her? Or does it?
 
Last edited:
Delta3DStudios

Delta3DStudios

Well-Known Member
Accessory Maker
Reflections said:
I find the glass stems all fit different on the nano, of 4 that I have..I guess same with aromatherapy cup will do same.
Click to expand...

No - it's a different fit than stems. The aromatherapy cup sits way too loose. Take a standard 19mm male combustion bowl and rest that on top of your nano - that's the same fit you get with the Aromatherapy cup. It's actually resting on the flat bottom of the glass cup! there is at least 1cm of space between the Nano's stainless steel heat port and the tapered glass - I don't like the fit, it's way too lose.

A good bump to the table and you've just spilled a few mL of water/essential oil into the base of your Nano (if your therapy cup is nearly full). * Edit - ok after testing when I bump it loose, the cup doesn't tilt that far over, but I still don't like the fit *

Since it's low temperature and nobody is directly inhaling it, I wonder if I could design a better 3D printed cup made with stainless steel from Shapeways? It could easily handle the temperatures we're talking about.

I can picture it now - an eagle's claw holding a bowl, the ankle of the claw is the mount for the nano..... I'm open to suggestions, seriously considering this - the price shouldn't be more than $30 ish for a 3D printed part in Stainless Steel

Edit - something like this in stainless steel would be pretty sweet I think!
eHqsWgr.png

(Yes, god damn I love 3D modeling - it took me literally 10 minutes to make this)

Edit 2 - yup - 3D printed steel is is heat resistant to 831ºC (1528ºF) degrees. Pretty sure my 3D printed aromatherapy cup should handle even max temperature on the Nano. If only I could make it 100% foodsafe!
 
Last edited by a moderator:
Delta3DStudios

Delta3DStudios

Well-Known Member
Accessory Maker
Enchantre said:
Um, that puppy will get HOT on there, @Ratchett ... perhaps the "loose fit" is to allow some escape of excess heat? I can see some pretty burnt fingers, otherwise.
Click to expand...

You'd think - but the heat port is up tight against the glass - it's certainly not a good design - I'm actually thinking about incorporating some vent holes to allow proper airflow in my 3D design (haven't added those yet to the final model). This cup absolutely lacks any sort of ventilation - the screen is flush with the base of glass on the cup (there's no way for air to escape the top of the Nano with this cup resting on it)
 
Last edited by a moderator:
You must log in or register to reply here.
Top Bottom