E-Nano from Epickai

ataxian

ataxian

PALE BLUE DOT
Enchantre said:
I think I might hot-glue a dot at my preferred spots... usually, it's kinda dark where I have it, so I have a hard time seeing the numbers.
I ordered a couple more pinch-stems, as I love the basket screens, especially for concentrates.
I think I'll eventually get a pinch-Gong, too.
Click to expand...
Are you into GLASS?
I use the D020 bubbler I picked up for $28 delivered.
It pairs well with the NANO.
I'm getting a more customized piece from GBD. I broke so much glass it was time for a new piece.
The NANO with a glass piece is amazing. I leave it plugged in on level 4. When I'm feeling that my THC, CBD's are low I crank it up to 6.5 pull out a water tool.

The NANO is CANNABIS GOURMET!
 
Mrmrmrmr

Mrmrmrmr

Well-Known Member
Just what I was going to ask ^^^
This would be so great.. Well the wait would suck being enanoless and all. Love to get in on that let us know man !
 
Mrmrmrmr,
  • Like
Reactions: ataxian
Tweak

Tweak

T\/\/34|<
ataxian said:
I use the D020 bubbler I picked up for $28 delivered.
It pairs well with the NANO.
Click to expand...

They are a perfect match, :tup:

buCMV9il.jpg
 
ataxian

ataxian

PALE BLUE DOT
smokum said:
More VIDS Please :razz: <--- says the guy who has never posted a vid ever :rolleyes:

I don't know why I'm even looking at another vape :shrug: VAS is baaaaad MmKay :evil:

:lol:
Click to expand...
CANNABIS is the "HOLY GRAIL"!

I can buy a more expensive vaporizer however that is not the point. The NANO is small in size & taste amazing for under $200.

It just so happens that it pairs well with glass!
 
Caligula

Caligula

Maximus
Tweak said:
For $28 it's a steal. It has the same bore as the nano so it can be held with one hand. Only takes an ounce of water + 1 drop of Rezblock. And the perc fires from any angle you may be holding it. So far no blowback into the nano bowl either.
Click to expand...

Even my gigantor bubbler doesnt get blowback with the Nano.

Also FWIW theres a US website that bought a bunch of D020s and are selling them for ~$36 or so. Not too bad if you dont want to wait a month?

And no I dont have the website address. Sorry.
 
ataxian

ataxian

PALE BLUE DOT
Caligula said:
Also FWIW there's a US website that bought a bunch of D020s and are selling them for ~$36 or so. Not too bad if you don't want to wait a month?
Click to expand...
Mine arrived to my front door in less than 3 weeks for $28.
If you can handle the wait?
Or like @Caligula pointed out if you spend a extra $8 you have it quicker!
My NANO was 5 days from order!

ghgate is where you buy the D020 for cheap!
I use it every session during the day with the NANO.

@Tweak Very nice picture!
@VaPeD&CoNfUsEd for ($28 - $36) it's very impressive!
 
Last edited:
ataxian,
Tweak

Tweak

T\/\/34|<
Caligula said:
Also FWIW theres a US website that bought a bunch of D020s and are selling them for ~$36 or so. Not too bad if you dont want to wait a month?
Click to expand...

8" Twisting Slitted Showerhead

It is $37.50 + Shipping ($7) and doesn't come with the nail, dome, and slides. Ends up being $44.50, or 64% more than from DHgate.

They appear to be doing the same with the WP-010, except the markup is %100 more.
 
2 Paces

2 Paces

Well-Known Member
Tweak said:
So far no blowback into the nano bowl either.
Click to expand...

@Tweak - Are you saying that you can lift the Nano & leave the GonG on the bubbler and the material won't get blown out by the air/water pressure?

I'm hoping that's what you mean. I never use the Nano through glass because my one piece blows the herb all over the place unless you also take the GonG out of the joint each time before you end your hit.

I was hoping to just lift the Nano off to clear the chamber (leaving the GonG still on the bubbler) without losing herb on the floor, but maybe I'm asking too much.

Not sure if everyone always lifts their GonG off at the end of each hit?
 
2 Paces,
  • Like
Reactions: ataxian
Tweak

Tweak

T\/\/34|<
2 Paces said:
@Tweak - Are you saying that you can lift the Nano & leave the GonG on the bubbler and the material won't get blown out by the air/water pressure?
Click to expand...

Yeah, so far. It might be because the volume of water in the D020 is so small. Idk.

Have you seen the Claisen adapter (cloud pal)? A cheap alternative to the Cloud Buddy.
31DWSve0ZmL._SL500_AA300_.jpg

This would fix your problem with your current piece, just lift a stopper instead of the Nano + GonG slide. Only around $9 shipped.
 
ataxian

ataxian

PALE BLUE DOT
2 Paces said:
@Tweak - Are you saying that you can lift the Nano & leave the GonG on the bubbler and the material won't get blown out by the air/water pressure?

I'm hoping that's what you mean. I never use the Nano through glass because my one piece blows the herb all over the place unless you also take the GonG out of the joint each time before you end your hit.

I was hoping to just lift the Nano off to clear the chamber (leaving the GonG still on the bubbler) without losing herb on the floor, but maybe I'm asking too much.

Not sure if everyone always lifts their GonG off at the end of each hit?
Click to expand...
I make a carburetor!

I don't lift my vaporizer
 
2 Paces

2 Paces

Well-Known Member
No biggie, thanks for the info. Saved me $28 :lol:

I love the Nano dry, and one of the things I love most is its simplicity. I know myself well enough to know I wouldn't use a multiple piece set up (carb or cloud buddy type) just to go through water with it. I already don't use the GonG because I don't like having to pull it and the Nano off the bubbler.

I guess I'm lazy when it comes to water, but I've got my EVO for simple water hits anyway :tup:.
 
Last edited:
z9

z9

Well-Known Member
I pull my gong every hit because clearing a piece is really satisfying to me. I also get blowback with my most used piece so pulling the gong is necessary. I just grab it, usually I can get it out with no fuss while its hot.

I've considered getting OGB to make me a low profile male to female adapter with a hole in the side to act as a carb. This should eliminate any blowback, make the nano easier to use, and allow me to roast a bowl if I want. Although a simple male to female adapter with no carb would make it much easier to pull off a hot gong as well.
 
Mrmrmrmr

Mrmrmrmr

Well-Known Member
Think I may have combusted.. Milked it like crazy in the ion and the vapor started to look different more solid like smoke. I had maybe .09 of some wax on .08 of avb. Took it out and it wasn't ashy a dark brown a few yellow pieces at most. Doesn't really look like the material is combusted.hm
 
Mrmrmrmr,
Caligula

Caligula

Maximus
No thats normal (well maybe not normal but its been known to happen?). The concentrate changes how the ABV looks as well as allowing massive vapor production.

Ive had that reaction myself a few times.

Edit: I always use fresh bud but id assume ABV would be the same.
 
Caligula,
  • Like
Reactions: Mrmrmrmr
Mrmrmrmr

Mrmrmrmr

Well-Known Member
All the glass didn't smell remotely like smoke, although I hardly remember that smell :p,
For reference the dial was set the tiniest bit past 7 and 7 is usually as high as I go ( on the dial anyway :whoa:)
 
Mrmrmrmr,
ataxian

ataxian

PALE BLUE DOT
Mrmrmrmr said:
All the glass didn't smell remotely like smoke, although I hardly remember that smell :p,
For reference the dial was set the tiniest bit past 7 and 7 is usually as high as I go ( on the dial anyway :whoa:)
Click to expand...
With my new glass I guessed wrong and set the dial at 8 however 6.5 was my number.
I think the glass paired correctly has a big influence.

The D020 work really well for how cheap it is.
The GBD is amazing as well.
NANO and glass = well matched!
WHOLE FLOWERS no grind!
 
ataxian,
  • Like
Reactions: LazyIdol
Mrmrmrmr

Mrmrmrmr

Well-Known Member
2 Paces said:
No biggie, thanks for the info. Saved me $28 :lol:

I love the Nano dry, and one of the things I love most is its simplicity. I know myself well enough to know I wouldn't use a multiple piece set up (carb or cloud buddy type) just to go through water with it. I already don't use the GonG because I don't like having to pull it and the Nano off the bubbler.

I guess I'm lazy when it comes to water, but I've got my EVO for simple water hits anyway :tup:.
Click to expand...
That's what the cloud buddy is for ! You simply pull the stopper off to clear it leaving the enano and gong on the piece.
 
You must log in or register to reply here.
Top Bottom