E-Nano from Epickai

monkeyrider

monkeyrider

Well-Known Member
I need some GonG help.

I got the 19mm GonG adapter with the new basket screen, ... so the distance between heat and product is the same as my stems. (except the Nano is upside down).

I have med sized bubbler with a snug GonG fit, no carb. I been putting exactly the same amounts in as when using the stems. (getting nice clouds) Nugs, grind, nug-wax-nug sammich, etc.

Not getting the clouds I expected or have seen with others mixing Nano and water. Any tips? Pack the stem fuller? More heat? I see from the ^ above poster he didnt need that much heat. Is it just cause the water filters out the vape so much?
 
monkeyrider,
Enchantre

Enchantre

Oil Painter
monkeyrider said:
I need some GonG help.

I got the 19mm GonG adapter with the new basket screen, ... so the distance between heat and product is the same as my stems. (except the Nano is upside down).

I have med sized bubbler with a snug GonG fit, no carb. I been putting exactly the same amounts in as when using the stems. (getting nice clouds) Nugs, grind, nug-wax-nug sammich, etc.

Not getting the clouds I expected or have seen with others mixing Nano and water. Any tips? Pack the stem fuller? More heat? I see from the ^ above poster he didnt need that much heat. Is it just cause the water filters out the vape so much?
Click to expand...
You will need to up the temp to achieve the same effects.
The distance LOOKS the same, but using upside down vs. right side up makes a difference in how the hot air hits the herb.

I would use 7.5 on a Gong, but only 6.5 for a stem, for flowers.
 
flotntoke

flotntoke

thoroughly vaped
ataxian said:
Hey as anybody tried the NANO with the D020 Bubbler from http://www.dhgate.com/product/d020-...e-perc-water/175832535.html#s1-1-1|1553276692
Pretty Amazing!
I needed to go to level 5.5 on the dial?
Click to expand...

Been loving the D020 under my nano! Makes a great travel pair, because D020 so compact. My only slight complaint is that the D020 doesn't have too much volume. Still loving it and using it in the mix at home, and is definitely a crowd pleaser! For $28 shipped (from China so make take a few weeks), you can't beat it!!

EDIT: ps.... I usually go about 6.5 with D020. End up there on most glass except the bigger Leviathan Lattice where I'm about 7.

monkeyrider said:
I need some GonG help.

I got the 19mm GonG adapter with the new basket screen, ... so the distance between heat and product is the same as my stems. (except the Nano is upside down).

I have med sized bubbler with a snug GonG fit, no carb. I been putting exactly the same amounts in as when using the stems. (getting nice clouds) Nugs, grind, nug-wax-nug sammich, etc.

Not getting the clouds I expected or have seen with others mixing Nano and water. Any tips? Pack the stem fuller? More heat? I see from the ^ above poster he didnt need that much heat. Is it just cause the water filters out the vape so much?
Click to expand...


EDIT: to avoid double post.... turn up the heat and draw slower. See my post a page or two back for more detailed info.
 
biohacker

biohacker

H.R.E.A.M
The problem is that when you turn up the heat and/or draw slower you char the bud. I swear once I figure it out I lose it again? lol I think i'm getting there, but still don't get the size of clouds that I like consistently, so I know they are possible. Do you guys preheat your steams before pulling? I think it helps somewhat?
 
biohacker,
  • Like
Reactions: ataxian
Vitolo

Vitolo

Vaporist
biohacker said:
I think i'm getting there, but still don't get the size of clouds that I like consistently, so I know they are possible. Do you guys preheat your steams before pulling? I think it helps somewhat?
Click to expand...
It is all on you, my man.
You said .... you know they are possible.
biohacker said:
....I swear once I figure it out I lose it again?.
Click to expand...
Practice make s perfect.
EVERY session can not be the perfect one, but you are getting perfect ones.
if you can make the same statements in a couple of weeks I will pay attention... and worry on your behalf.
We all want it now.
We can not have it exactly as we want it now... we must pay our dues.
You are paying the dues this very moment.
(the dues = learning curve)
In a short time you will be saying the same thing to other recent E-Nano convertees!
 
biohacker

biohacker

H.R.E.A.M
Thanks Vito! Agree with every one of your words. Strains can be so different and thus like you say, it's the learning curve. I will conquer it, because I have seen it perform miracles, and furthermore the conservation of material is something I have yet to see.
 
Techn!d0n

Techn!d0n

Well-Known Member
This vape is so strong... you can combust easy at 8.... WOW :o ... well that still does not change how... I LOVE THIS VAPE!! :D
 
Techn!d0n,
  • Like
Reactions: ataxian
E

Eespiajer

Well-Known Member
biohacker said:
The problem is that when you turn up the heat and/or draw slower you char the bud. I swear once I figure it out I lose it again? lol I think i'm getting there, but still don't get the size of clouds that I like consistently, so I know they are possible. Do you guys preheat your steams before pulling? I think it helps somewhat?
Click to expand...
5-10 secs then I pull. thats about it I pull and stir from the same heat, and when I can't get any more pulls then the abv is done. usually a golden brown (3-5 hits)
 
Caligula

Caligula

Maximus
biohacker said:
The problem is that when you turn up the heat and/or draw slower you char the bud. I swear once I figure it out I lose it again? lol I think i'm getting there, but still don't get the size of clouds that I like consistently, so I know they are possible. Do you guys preheat your steams before pulling? I think it helps somewhat?
Click to expand...

Are you using a glass piece? I find it easier to adjust technique when I can see how a piece is filling with vapor as it happens.
 
Caligula,
E

Eespiajer

Well-Known Member
ataxian said:
I have a 18mm and a 14mm adapter.
The fitting of the D020 is 18mm.

Use adapters if need be!
Click to expand...
the only gong adapters andy sells are 14mm and 19mm. so for the d020(I just impulsed bought) would i get 14mm and use 18mm adapter. I have an adapter that I bought on accident for my current water piece.
 
Eespiajer,
ataxian

ataxian

PALE BLUE DOT
ataxian said:
I have a 18mm and a 14mm adapter.
Click to expand...
MileHighLife said:
Anyone over here like to use there gong joints in a j hook? My favorite way to use my underdog at the moment. I'm seriously considering an enano after seeing some of yalls videos ...
Click to expand...


Eespiajer said:
the only gong adapters andy sells are 14mm and 19mm. so for the d020(I just impulsed bought) would i get 14mm and use 18mm adapter. I have an adapter that I bought on accident for my current water piece.
Click to expand...



J HOOKS should be a part of any vaporist tool box!

Cannabis is important as well!
 
Last edited:
ataxian

ataxian

PALE BLUE DOT
as said:
19mm GonG fits in 18mm joint aka the D020
Click to expand...
19mm or 18mm are the same fitting in glass fitting language!
Glass-Adapter-Gender-Changer-Group1.jpg

18mm and 14mm are sizes you go back and forth from.
The fittings are flared.
The widest part might be 19mm.
A Some people call a piece 19mm while others call it 18mm.

This 18mm GonG some from various countries call 19mm!
The D020 Blubbler has a 18mm Female Fitting.
A 19mm fitting will work.
If you have a 14mm GonG you just use a 18mm to 14mm glass reducer fitting.

https://www.google.com/search?q=gla...sglassworks.com%2F%3Fpage_id%3D6684;1620;1080

Get creative!
 
Last edited:
A

as

Well-Known Member
I only buy 14mm GonGs for my nano and solo as I have some 18/14mm reducers I'm good to go on most bongs

Digging the nano as my bed side vape
 
as,
  • Like
Reactions: ataxian
Caligula

Caligula

Maximus
vapor33 said:
If I was to get a e-nano, what adapter(s) do I need to use on a glass piece?
Click to expand...

Depends on what size your glass piece takes. The Nano has 14mm and 18mm glass on glass (gong) adapters available for it since those are the two most widely used sizes for glass pieces. I have one of each, and then a backup of each in case I break something.

As for the type, they offer "all glass" (it has a glass screen built into it) and "pinched" (basically a straight tube which requires a metal screen). I prefer the all glass version. I also prefer the 18mm version, so I can attach these inside of it!

http://www.puffitup.com/Arizer-Elbow-Adapter-p/arizerscreenkit.htm

Eliminates the need for a metal screen on top of the glass screen in order to prevent smaller bits from getting through. Also allows you to collect quite a bit of gong hash! And yes, Im coining that term.
 
Last edited:
You must log in or register to reply here.
Top Bottom