El Duderino
The Dude abides.
Dovetail Woodworks makes some nice stems and mouthpieces. A lot seems to be sold out at the moment but they always make new stuff.
-
SCAM WARNING! See how this scam works in Classifieds.
Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
Dovetail Woodworks makes some nice stems and mouthpieces. A lot seems to be sold out at the moment but they always make new stuff.
Cmdr. Redeye
Former Cylon sheriff
I put the M7 tip/bowl on the 2021 M/XL combo. Liking this! Hmmm ...
1. Now I know what extraction is.
2. First of any new should go through Dyna, as you can taste almost perfectly.
3. They are not exaggerating about efficiency. I don't remember Lemon Tree doing this ...
4. Zen-like practice of rolling heating, with its focus on repetition, absolutely relaxing in itself.
5. Remember to turn the burner off.
6. Other, ahem, the battery vape may dial in exact temps, but the rollercoaster of temps in Dyna is also fun and educational, allowing all kinds of hits.
7. Don't drop it. Caps can pop off or become locked on, needing George's knife blade trick to loosen.
8. Remember to turn the burner off.
9. Remember to turn the burner off.
10. Remember to turn the burner off.
CR
1. Now I know what extraction is.
2. First of any new should go through Dyna, as you can taste almost perfectly.
3. They are not exaggerating about efficiency. I don't remember Lemon Tree doing this ...
4. Zen-like practice of rolling heating, with its focus on repetition, absolutely relaxing in itself.
5. Remember to turn the burner off.
6. Other, ahem, the battery vape may dial in exact temps, but the rollercoaster of temps in Dyna is also fun and educational, allowing all kinds of hits.
7. Don't drop it. Caps can pop off or become locked on, needing George's knife blade trick to loosen.
8. Remember to turn the burner off.
9. Remember to turn the burner off.
10. Remember to turn the burner off.
CR
hotmeals
Serial vapist
For me, the performance difference between tips, including the Unidyn, is much smaller and less noticeable when using the BallR cap than with a standard cap. I don't think you'd be missing out by using the BallR on a tip other than the Unidyn. I have been especially enjoying the Unidyn with a standard cap though, if you think you'd be into that.
coolbreeze
Well-Known Member
Wake & Bake! Hope you all are enjoying/anticipating your new Dynavaps!
Is there still no way to directly upload pictures on here?
My Dynavap needs a cleaning. Any company besides DHgate sell the 18 mm bong/bubbler adapters?
My Dynavap needs a cleaning. Any company besides DHgate sell the 18 mm bong/bubbler adapters?
coolbreeze
Well-Known Member
Not that I know of.
Do you mean 18mm Water Pipe Adapters? The only ones I find are the universal 10, 14, 18mm ones:
LittleFinger Universal DynaVap Adapter
The universal 10, 14, & 18mm male joint of the LittleFinger Adapter makes it the easiest and cleanest way to use any DynaVap tip with a water piece.
Yes, the adapters that’ll fit the 18 mm bong or bubbler. The one you posted is interesting. I guess it’ll just slide all the way down to fit 18 mm as well.Not that I know of.
Do you mean 18mm Water Pipe Adapters? The only ones I find are the universal 10, 14, 18mm ones:
LittleFinger Universal DynaVap Adapter
The universal 10, 14, & 18mm male joint of the LittleFinger Adapter makes it the easiest and cleanest way to use any DynaVap tip with a water piece.www.sneakypetestore.com
You think after all this time they’d give us the option to upload directly from our camera roll.
coolbreeze
Well-Known Member
Exactly. Then you're covered if you have or get a pipe or jhook with either of the other two sizes as well.
Thanks dude that should work perfectly. Kind of pricey though, but I never dry vape with my Dynavap so it’s an essential piece. I really don’t want to order from DH gate.
coolbreeze
Well-Known Member
Maybe you can find a cheaper one somewhere? Ebay may have them, etc. I have a variety of vongs so I use them through water most of the time, too. Glass ones are less restricted though, so that's kinda nice.
Just put in my order. Now I’ll pray to the glass gods that it will stay intact for sometime to come lol.
Cmdr. Redeye
Former Cylon sheriff
420 sales stuff ...
Cherry BallR
New Ti tip on 2021 M/XL
Bonger with SS 2021 M tip/bowl
All nugs Animal Butter.
First impression of BallR on M/XL with Ti tip... Interesting. I'm too much a noob to tell, but this is different hitting ... Trying Bonger tomorrow. Neat; the O-rings do pop in to hold it tight.
CR
Cherry BallR
New Ti tip on 2021 M/XL
Bonger with SS 2021 M tip/bowl
All nugs Animal Butter.
First impression of BallR on M/XL with Ti tip... Interesting. I'm too much a noob to tell, but this is different hitting ... Trying Bonger tomorrow. Neat; the O-rings do pop in to hold it tight.
CR
hotmeals
Serial vapist
Nice, I love the Ballr on the Bonger. It's fun. Just so you know, that '21 tip can be seated further into the Bonger if you want. It can go all the way in as if it were a normal stem. It doesn't matter as long as it's sealed though of course. You can also remove the o-rings if you prefer.
WhyWhyWhy?
Active Member
As you know, the 4/20 sale has already started earlier and has been going on for a week. Do you think it's worth waiting for any significant discounts or special offers from Dynavap on April 20? Or is what we're seeing now the maximum we can count on for discounts? Does anyone remember what it was like in previous years?
Cmdr. Redeye
Former Cylon sheriff
@hotmeals Thanks for the info, Bonger confused me for a minute. The stem goes way up, to the ccd bottom. Bowl/tip does pop in at the stem base.
I put the 2021 M/XL's tip on there as it seems to get hottest.
With my tremor, going to drop a hot Dynavap piece one day, hopefully not in my lap.
BallR/technique. I've been using a tabletop torch with dual blue/yellow flame, but threw in the Cyclone 2 torch in the 420 order. Normally I use the tabletop's yellow, which can't allow pinpoint as it's, hm, third of an inch thick? So I'm heating a wider area. Brief use of torch shows it's less forgiving than that yellow flame, got a bit of stinky combustion. (That smell has gotten offensive since I chose this path. Cleaned the heck out of the old bong and it still smells burnt.)
I could be mistaken, but I think the Dynavap system is fairly forgiving. My sloppy all over the place heating still delivers what it should from the taste hit to "yeah, it's definitely beat."
I appreciate this community. Talking about DHV or TEDs locally isn't educational...
CR
I put the 2021 M/XL's tip on there as it seems to get hottest.
With my tremor, going to drop a hot Dynavap piece one day, hopefully not in my lap. BallR/technique. I've been using a tabletop torch with dual blue/yellow flame, but threw in the Cyclone 2 torch in the 420 order. Normally I use the tabletop's yellow, which can't allow pinpoint as it's, hm, third of an inch thick? So I'm heating a wider area. Brief use of torch shows it's less forgiving than that yellow flame, got a bit of stinky combustion. (That smell has gotten offensive since I chose this path. Cleaned the heck out of the old bong and it still smells burnt.)
I could be mistaken, but I think the Dynavap system is fairly forgiving. My sloppy all over the place heating still delivers what it should from the taste hit to "yeah, it's definitely beat." I appreciate this community. Talking about DHV or TEDs locally isn't educational...
CR
SmokeyDope
Herbal Engineer
Definitely seen M and wand pair for much less like 90$, the extra 30$ for opal bundle is from the additional xl mouthpiece.
I can't remember if they did super special 420 release but its definitely on the table as an option.
So, how are everyones impressions of ballr after a few weeks? Is it a complete game changer and daily cap for you or did it end up as drawer stuff? Pros and cons? Is it easy for wand to heat up? How is cleaning? How hard are the balls inside the cap to replace?
Last edited:
Cmdr. Redeye
Former Cylon sheriff
I got the Topaz bundle ($59), no complaints ... the Ti bowl/tip went on the traveler. The BallR's additional length makes it not fit this particular carry rig, but improves the balance and handling a bit.
It won't pop off, with its weight. Having the convection/conduction option is nice. BallR's going to act different on different bowl and stem combos, I'd guess. It's tolerating my poor technique well. Sometimes I wonder if it's heat sink holding or quick dissipation we're looking for with the tips/bowls. Both at different times, I guess. Getting perfect AVB, now. Light toasty.
CR
It won't pop off, with its weight. Having the convection/conduction option is nice. BallR's going to act different on different bowl and stem combos, I'd guess. It's tolerating my poor technique well. Sometimes I wonder if it's heat sink holding or quick dissipation we're looking for with the tips/bowls. Both at different times, I guess. Getting perfect AVB, now. Light toasty.
CR
hotmeals
Serial vapist
I'm enjoying it a lot. I'd say it's a game changer within the Dynaverse at least. It's not a daily piece for me, the standard caps are still my go tos, but that was expected since standard DVs are pretty perfect go to vapes for me. It heats up quickly with a powerful enough heat source and produces nice convection leaning hits. I guess a con would be that it's a little trickier to get good results with. Don't know about the Wand, but I should be receiving one tomorrow and can test it. It works well in the Forge for sure. I've been using another cap's digger outer to try to keep the balls as clean as possible and haven't seen any signs of them getting dirty, and haven't tried to take it apart for any reason yet. It looks easy enough in the videos, but people are saying they can be pretty tight.
coolbreeze
Well-Known Member
I played around last night heating it with the Inductor. I'll have to dial it some but it works really well.
jbm
Well-Known Member
What voltage and where are you heating? I’m taking an illness mandated t-break, but I’ve been interested in using the Inductor more often.
coolbreeze
Well-Known Member
Cmdr. Redeye
Former Cylon sheriff
I accidentally combusted with that light Ti bowl... Breathed smoke, coughed, stunk up the vape. I was even coughing hours later. Learned. Bonger was producing thin vapor too, with both caps. Actually hitting on the thing showed it producing, more research needed.
CR
hotmeals
Serial vapist
Sounds like that could be draw speed / strength related would be my guess