Moses Baca
Colorado State Reformatory #8755
Using the DynaBuilder includes the correct condenser per the reply I got from Josh at DV.
Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
Hogni
Honi soit qui mal y pense
Maybe but the description doesn't tell that. And where is the cap? Included with the tip w/o telling so? Then we would have to speak with George to add that for clarification.
Just use a Q-tip for cleaning, fill the cotton in your vapcap, vaporize it and enjoy the effects - less the taste.
Just use a Q-tip for cleaning, fill the cotton in your vapcap, vaporize it and enjoy the effects - less the taste.
Last edited by a moderator:
cybrguy
Putin is a War Criminal
OK, than maybe I'm confused. This is what it says on his site...
--------------------------------------
Kit Comes With :
- 14mm Wand that fits titanium VapCap tip.
- 4 x O-Rings (2 Standard Size, 2 Larger, to allow you to tailor your VapCap fit).
Optionally With :
- 18mm/14mm Reducer (if your water pipe is 18mm Female Joint)
- Keck clip to hold reducer to wand. (color varies)
There is no tip or cap in there. Then this...
-----------------------------------------------
In addition to this kit, all you need to make a great VapCap desktop vape:
- The VapCap Cap:
- https://www.dynavap.com/dynashop/parts/the-cap-acp-1
- The VapCap Tip: (Stainless Steel tips work too, but DynaVap doesn't list them separately yet).
Seems pretty clear to me. Either way I think you understand it correctly now.
And, BTW, you can get the steel M18 tips on the site now.
Is it safe to vape cotton? It is very very sticky, if I put in a q-tip through the condenser the cotton would get stuck on the hash
KidFated.
Unknown Member
Organic cotton, warm it up a little bit first, with maybe a session or two, then just push a q tip through
Moses Baca
Colorado State Reformatory #8755
The picture on the website shows a cap but I confirmed with DV. Ordering from the DynaBuilder gets you a complete unit, ready to go. I'm going to grab an M stem with Ti parts and do some swapping with one of my Shadows. I think I've got the DynaVAS.
Go to the Dynabuilder>
Choose...
- no mouthpiece
- M Stem
- titanium tip
- $70
(yes it will come with condenser and cap too. All Dynabuilder options are complete vapcaps)
Best 'bang for your buck' vape in the world right there!
alex91
Well-Known Member
Those with removable mouthpiece and Fat Mouthpiece adapter: when trying to remove the rubber adapter, does your mouthpiece always get stuck with it, meaning you have to remove the other parts of the vapcap first in order to remove it? This is happening with my Omni XL.
204Markie
Well-Known Member
My order came in and wow. I think I have to put away my IQ and save it for my friends. It's going to be my daily driver with my vapman and my HI long. It's beautiful and tastes amazing, no learning curve and had great technique from the start (probably because I'm so used to my vapman). though it also came with the M for the promotion and I have big hands and I would have had a bit of trouble spinning it in my fingers so I'm quite happy that I got the XL omni.
I also reaaaaaaly need to get a Walnut and a Yew body to match my other favorite vape... God I love this thing.
*Toasted*
As always 420 in the 204!
I also reaaaaaaly need to get a Walnut and a Yew body to match my other favorite vape... God I love this thing.
*Toasted*
As always 420 in the 204!
Prophecy
Well-Known Member
I load my vapcap with 0,06g gives me a very long lasting session
After one or two heating cycles I stir it up the hash in the bowl with a needle to increase the surface for vaporizing.
I also use a mesh screen insert for the bowl so they stay longer clean, very useful.
After using hash couple of weeks, last friday evening I had the chance to use again some nice flowers and i have noticed once again why I have so much love for the flowers.
It gives my this nice tasty terpy vapor hits and the high was felt more a rounder expirience.
Was this nice giggling high back from my beginning days. I hat only filled my omni 3 times, and the day ended at 2 in the morning for me, speaks for the efficience.
Oh and with this three guys I had also much fun
Last edited by a moderator:
Nice! Where do you get that mesh? I use hemp filter but it would be easier with mesh filterI load my vapcap with 0,06g gives me a very long lasting session
After one or two heating cycles I stir it up the hash in the bowl with a needle to increase the surface for vaporizing.
I also use a mesh screen insert for the bowl so they stay longer clean, very useful.
KnutAnkhAmon
Tramp
I like to put sticky hash in a thin layer on a screen and then fold it together before putting it in the chamber. It is my experience that if you mount the hash in a way that gives a lot of surface exposed to the heat, then the vapour wil release more efficiently. This will give a better taste as less spent material wil be overheated while finishing the session.
Yeah, I make it super flat by pressing it with something hard (I put in around 0,02g, incredible effect for such small amount)
With apologies, I'm working on clarifying the listing.
Thanks for posting this!
EDIT: Ok, done. Basically, I added an option to some listings to "Add a SS Tip and VapCap Cap for $35).
Last edited:
Prophecy
Well-Known Member
I get it from Amazon it's a 300 mesh SS screen, I also use it as a second filter over the CCD to prevent tiny bits to get in the condenser I punch them out with a 8mm punch hole.
Campos
Well-Known Member
"Less is more"
Try small amounts, I use the smallest setting of the bowl of the Ti tip. It works wonderful. Leave some air so that the hash is not all compacted.
But don't forget less is more, BB is watching you!!
Last edited:
stark1
Lonesome Planet
Imitation they say is the sincerest form of flattery, PP.
Not having a lathe, last night I thought I wood confabulate a wood VapCap stem from what
various parts strewn around my room, before beddy bed time I had.
My rendition of a franken-wood-stem VapCap (with condenser, for a through pass) + mini herb stash. LOL
Not having a lathe, last night I thought I wood confabulate a wood VapCap stem from what
various parts strewn around my room, before beddy bed time I had.
My rendition of a franken-wood-stem VapCap (with condenser, for a through pass) + mini herb stash. LOL
204Markie
Well-Known Member
An update with my new omni, the high temp organic vape cotton works wonders under the screen. The cap would pop up like Rice Krispies cereal once at temp, so pushing the cap down a bit more to set it in firmer worked. The vape cotton with a dab in the middle also was nice.
I did find that the cap stayed warm for a bit and didnt feel nice when I hurried it into my pocket. At home the magnet on my grinder does wonders at home and the cold Canadian winter air helps with cooling the cap faster as well.
As for my omni setting I dont plug it all the way as I want some airflow but still enough where I dont need to play with the carb. It really feels like I'm pulling from a cigarette and its satisfying. Instead of doing 2 bowls of my vapman I alternate them as I feel like they are close cousins but very different at the same time but they work well together and make me very satisfied.
I did find that the cap stayed warm for a bit and didnt feel nice when I hurried it into my pocket. At home the magnet on my grinder does wonders at home and the cold Canadian winter air helps with cooling the cap faster as well.
As for my omni setting I dont plug it all the way as I want some airflow but still enough where I dont need to play with the carb. It really feels like I'm pulling from a cigarette and its satisfying. Instead of doing 2 bowls of my vapman I alternate them as I feel like they are close cousins but very different at the same time but they work well together and make me very satisfied.
StringTheorista
Well-Known Member
@204Markie, George says, and I’ve found it true, that as soon as you hear the cool down click, you can safely stow the vapcap in the polypropylene tube it came in. Which makes it pocket-safe.
