Or a bamboo skewer makes a good cleaning rod.
Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
Wittgenstein
Well-Known Member
I tried to order a Woody-S from them and it was out of stock eventhough it was listed on the site.
https://lacentralevapeur.com/vapori...portable.html?search_query=dynavap&results=55
They wrote to me that they did not know why but that this was their test website and I should use
https://jahvaporizer.com/
instead. Its also what you get when you click on the unionjack on the other site. There the range of DV products is much smaller but you still get some vapes that are not available anymore via DV like the Woodies. But no magic gradient Ti Omni, no gen4 Ti tips and no Woody-S. I guess gen4 tips are pre EU sales.
Edit: I just checked and the Woodies are listed out of stock too.
I have scanned all webshops all over Europe and know pretty well what is available. The only shop that still has anodized Omnis is Vaposhop, but only blue and gold ones. But no magic.
Hehe, yes. Insufficient supply of ressources leads to inventive methods. If VCs had been invented earlier I guess noone in the world would use tobacco with weed.
Witty
Last edited:
Prophecy
Well-Known Member
Why not shove a little bud through the condenser?
Thats my cleaning way hit the vapcap empty 2 cycles right after that while the condenser is warm i take it out from the stem then i push a little bigger in diameter bud from the tip end through the condenser the resin drop that cames out before the bud is stored in a silicon container and the resin coated bud is turned in my grinder with grindet material so all the fine material sticks to it.
After this process i clean the condenser with 80% alcohol and shove a piece of tissue through the condenser then rinse well with hot water. Clean the rest of the vapcap then the resin coated bud came in my vapcap chamber gives my a very good heavy session then
Wittgenstein
Well-Known Member
Improvised carbless and condenserless cardboard one way Vapcap with plastic mp and modiefied stainless steel tip:
And here it is, Ladies and Gentlemen. Wittys first carbless custom stem:
The vape is an XLS with a modified gen2 ss tip, an ss xl condenser and an ebony mouthpiece. Will also test as omni configuration
I'll report how it performs.
Witty
Edit: Has there anything been made with aluminum yet?
And here it is, Ladies and Gentlemen. Wittys first carbless custom stem:
The vape is an XLS with a modified gen2 ss tip, an ss xl condenser and an ebony mouthpiece. Will also test as omni configuration
I'll report how it performs.
Witty
Edit: Has there anything been made with aluminum yet?
Last edited:
Dynalowrider
Well-Known Member
I ordered some Dremel Stainless Steel pin brushes, (bristles straight out end of shaft, 1/2" long). I don't use with the Dremel, just brush out the bowl. They help keep the screen clean between bowls. Works fantastic, even when the bowl is warm. Doc
IAmKrazy2
Darth Vapor
I don't get in this thread often enough to rave and rant about how damn fantastic Dyna products are. For someone who has literally spent thousands and thousands of dollars over the years on vaporizers, it is incredible one of the vapes that i use most often costs less than $100. (Please ignore that i own well over 10 DynaVaps).
I strongly feel this is one of the most effective vapes on the market in extracting your herb fully and efficiently.
Arguably the holy grail in this regard.
Affordable, easy to maintain, effective, efficient, American, collectible, and progressive. George keeps improving and changing.
Done telling everyone what they already know.... I am off to buy another Dyna saw another new option i haven't tried yet. Out.
I strongly feel this is one of the most effective vapes on the market in extracting your herb fully and efficiently.
Arguably the holy grail in this regard.
Affordable, easy to maintain, effective, efficient, American, collectible, and progressive. George keeps improving and changing.
Done telling everyone what they already know.... I am off to buy another Dyna saw another new option i haven't tried yet. Out.
Fat Freddy
FUCK CANCER TOO !
stark1
Lonesome Planet
Haven’t heard from SDS lately. KidFated seems awfully quiet, he usually is “liking” everyone.
Ataxian is not being “civilized”, haven’t heard a peep from him for a while. And others.
I am in awe.
Is there something going on? Are we coming apart at the seams? Is FC?
Only October will tell.
Ataxian is not being “civilized”, haven’t heard a peep from him for a while. And others.
I am in awe.
Is there something going on? Are we coming apart at the seams? Is FC?
Only October will tell.
Last edited:
WoodVillain
Backwoods Rated
Who all names there vap caps?
I have 4 with names....
1. Success. When I'm Feeling down about my accomplishments, I hit success, and those worries disappear!
But... Success normally comes with work, sometimes I'm feeling upset about my finances and lack of money, but want easy money, screw accomplishing something....
In these cases I hit....
2...The lottery!
There are also those times when I'm stuck on a job, at an event, or just around that 1 annoying person you can't seem to avoid...
Times like these I hit...
3.... The Road...
Life's not all about success, money, and location... most days the only thing I'm thinking about hitting is....
4... My wife...
I was going to put pictures of each... but then I got high...
I have 4 with names....
1. Success. When I'm Feeling down about my accomplishments, I hit success, and those worries disappear!
But... Success normally comes with work, sometimes I'm feeling upset about my finances and lack of money, but want easy money, screw accomplishing something....
In these cases I hit....
2...The lottery!
There are also those times when I'm stuck on a job, at an event, or just around that 1 annoying person you can't seem to avoid...
Times like these I hit...
3.... The Road...
Life's not all about success, money, and location... most days the only thing I'm thinking about hitting is....
4... My wife...
I was going to put pictures of each... but then I got high...
Marlon Rando
Well-Known Member
He's being Civilized over @ Vapor Asylum, quieter there.
WoodVillain
Backwoods Rated
I honestly didn't name any of mine... just being snarky.
I have a regular 2017 M, a sandblasted M, a 2017 M with Ti tip, and the newer omni ti...
I'm liking the omni best, least restrictive, and best feeling mouthpiece...
But I miss my old style omni.... I liked it better. Less flashy, cleaner looks. But this one still works great... I just think it gets hotter... then again I went 10 months without using any... maybe I don't remember correctly...
hopla
Well-Known Member
I use much more often my Vapcaps now that i have made my own Induction Heater.
I use my OG with the glass body too, whereas i was very disappointed with a torch lighter because i couldn't get 2 successive satisfying sessions.
I prepare the M18, vape it for 4 sessions with my IH then while it's cooling down i prepare the OG and go for 3 good sessions until the M is ready for reload.
The Induction Heater is really a game changer for Dynavap, i get their mantra (get rid of batteries and electronic gadgets too complicated) but the irony is that with a battery powered IH the Vapcap is very consistent, the quality of the sessions is very steady wether you use two very different Vapcaps like the OG (not that easy to master) or the M18.
Now i have an excuse to buy another one (Omni XL i think...) to have more variety in the turnover.
I use my OG with the glass body too, whereas i was very disappointed with a torch lighter because i couldn't get 2 successive satisfying sessions.
I prepare the M18, vape it for 4 sessions with my IH then while it's cooling down i prepare the OG and go for 3 good sessions until the M is ready for reload.
The Induction Heater is really a game changer for Dynavap, i get their mantra (get rid of batteries and electronic gadgets too complicated) but the irony is that with a battery powered IH the Vapcap is very consistent, the quality of the sessions is very steady wether you use two very different Vapcaps like the OG (not that easy to master) or the M18.
Now i have an excuse to buy another one (Omni XL i think...) to have more variety in the turnover.
Last edited:
stark1
Lonesome Planet
I use much more often my Vapcaps now that i have made my own Induction Heater.
I use my OG with the glass body too, whereas i was very disappointed with a torch lighter because i couldn't get 2 successives satisfying sessions.
I prepare the M18, vape it for 4 sessions with my IH then while it's cooling down i prepare the OG and go for 3 good sessions until the M is ready for reload.
The Induction Heater is really a game changer for Dynavap, i get their mantra (get rid of batteries and electronic gadgets too complicated) but the irony is that with a battery powered IH the Vapcap is very consistent, the quality of the sessions is very steady wether you use two very different Vapcaps like the OG (not that easy to master) or the M18.
Now i have an excuse to buy another one (Omni XL i think...) to have more variety in the turnover.
Congrats, @hopla! Please post pictures of your personal IH. Is it portable?
Agree with you that an IH gives consistency with a VapCap.
hopla
Well-Known Member
For now it's not presentable as the battery is laying in a Lavazza coffee tin box with the wires running out to a swicth, the switch going to the board sitting in the Lavazza box top
But as soon as i succeed in finding the good disposition in the box i'll post the final result.
It will be somewhat portable but i bought a 3500mah battery (13 cm long) instead of a 1500mah (7cm long) so it's still portable but not stealthy at all. (i have posted the components in the DIY section)
I must say that i thought it would be harder to do your own IH. (KeroZen very promptly and nicely helped me with some questions i had)
An 8 year old boy could do it (the soldering part can be replaced by screwing the copper coil on the board, but i soldered it... a messy job that will do, first time ever i used a soldering device), and that 8 yo boy would probably do it better than me (i know nothing about electricity...).
When you have a try at it you realise how much of a bargain Pipes' jarhead is.
I will certainly buy one further ahead, and i'm very curious to see the miniaturisation of these IH devices as i am sure that is the future equivalent of the cigarettes' lighter for the Vapcaps.
I can imagine a small IH that would fit on your belt, for discretely heating up your vapcap.
Last edited:
Nina
Well-Known Member
Super duper, I knew you were a nice guy really
I dont have a name for my vapcap, it may well have some names for me, like 'stranger' or 'that woman who doesnt care for me any more'
I've not used it (him/her?) for a while, torch fatigue, I'm just tired of fiddling about with torches and lighters and I've been using the FP mostly.
I feel sort of guilty
![:\](/i/s/hmm.gif "Hmm :\")
great point
Now I'm waiting for the mini vapcap heater, or VCIHm
hopla
Well-Known Member
On top of Pipes' solutions, you may find some interesting ideas too from Stardustsailor http://fuckcombustion.com/threads/v...ating-bits-n-pieces.33216/page-2#post-1309601 or mr_cfromcali
http://fuckcombustion.com/threads/f...heaters-for-dynavap.33573/page-4#post-1309584
But nothing small enough to fit on a belt for now, but i'm confident that will come sooner than later when you see the enthusiasm and creativity they put in their works
ClearBlueLou
unbearably light in the being....
Can’t recommend @Pipes’ products and handiwork highly enough.
Buying my Skeletor (discontinued now, I think) was a transformative experience in my vape life, much the way the Vapcap itself was and still is. There is no going back for me. Due to a freak malfunction in my unit, I’ve been without an IH since April...and during all that time, I’ve not used my vapcaps even once; my go-to has been my bubbler. I’ve just received a replacement bit, and when I get it installed and verify that it’s working again, I’m going to put myself on his list for a Portside, which is not really portable, but it is enclosed and it’s easily takeable, and I would like that.
Buying my Skeletor (discontinued now, I think) was a transformative experience in my vape life, much the way the Vapcap itself was and still is. There is no going back for me. Due to a freak malfunction in my unit, I’ve been without an IH since April...and during all that time, I’ve not used my vapcaps even once; my go-to has been my bubbler. I’ve just received a replacement bit, and when I get it installed and verify that it’s working again, I’m going to put myself on his list for a Portside, which is not really portable, but it is enclosed and it’s easily takeable, and I would like that.
Ramahs
Fucking Combustion (mostly) Since February 2017
Yeah. I got mine from @Pipes . Now he sells the individual parts, so I just got the main heating unit and the port you plug into it that plugs into the power adapter. Hell, I got lazy and just put it in an Interplanetary Development Grinder (SWII) box. Been telling myself I was going to find a better box/shell to build it into...but it works fine and I may just order a couple more of these from Pipes and install them both into better shells and just keep this one as is:
I really like my Chinese SJK IH and recommend every Vapcapper get one, even pipes owners to save your batteries and have the ability to heat more than 1 tip at a time;
https://www.ebay.com.au/itm/220V-Dental-Lab-Carving-Infrared-Electronic-Sensor-Induction-No-Flame-Wax-Heater/192654160253?_trkparms=aid=222007&algo=SIM.MBE&ao=1&asc=20140813105702&meid=99f21ea060a44afda33fb23402c1e4fd&pid=100276&rk=1&rkt=4&sd=253416233227&itm=192654160253&_trksid=p2060778.c100276.m3476
Mine has had 2 hard drops onto concrete and is still going strong, that being said, I only use it for heating a vapcap in a GonG WPA to use as a carb cap for my bong while using my WS from ED, fill your vapcap as normal but do not put the cap on it, if you have a toke on it, that is the amount of draw resistance you get when using Ef's TNT WS as a heat source for any VapCap.
https://www.ebay.com.au/itm/220V-Dental-Lab-Carving-Infrared-Electronic-Sensor-Induction-No-Flame-Wax-Heater/192654160253?_trkparms=aid=222007&algo=SIM.MBE&ao=1&asc=20140813105702&meid=99f21ea060a44afda33fb23402c1e4fd&pid=100276&rk=1&rkt=4&sd=253416233227&itm=192654160253&_trksid=p2060778.c100276.m3476
Mine has had 2 hard drops onto concrete and is still going strong, that being said, I only use it for heating a vapcap in a GonG WPA to use as a carb cap for my bong while using my WS from ED, fill your vapcap as normal but do not put the cap on it, if you have a toke on it, that is the amount of draw resistance you get when using Ef's TNT WS as a heat source for any VapCap.
