Dynavap VapCap

[Joaon]

Astonishing picture ! Kudos
Sooooo .. Is this a wooden Mp on an Omni Condenser, or just a standard SS condenser?

--

Still minding on my side about a metal sterm/body with a lip that goes over the exposed Tip O-ring,
allowing to dig the tip on red hot embers/fire pit.

then, it will be THE prepper/survival vaporizer !
No more needs of petroleum products, nuclear electricity, batteries ..

 

[Diggy Smalls]

Get a dabber tool with the hex key on the other end made up? That sounds the most practical to me.

 

[stark1]

@Hogni

Your choice, Kid! LOL

 

[flotntoke]

Tip for anyone having trouble getting your vapcap out of your dynastash. If you flick your wrist a little as you start to tip it you can get your vapcap to slide out halfway out and stay there. If you're worried about it coming all the way out you can put your finger on the lid so the mp hits your finger as you flick your wrist. Sorry I'm not explaining very well

The way the DynaStash lid is set up, it's not hard at all to slip your VC out and not spill any material you have in the other side. You don't have to tip it upside down, or even flick, if you don't want to. Unless your stash side is full to the brim, you can open the VC side, tilt it a bit (10 - 20 degrees) and give it a little jostle. The VC will start to slide out. Grab the end, pull it out and done!

 

[snamuh]

Figured I'd post this since it's on topic.

My dynastash didn't fit my 14mm vong so I sanded the inside...(it was actually time consuming as I dont really have any tools, just sand paper taped to a sharpy haha) So I'm not sure how different mine is compared to others.

Even after sanding the vong would stick a little so I ended up rolling up some hemp fiber and placing it in the bottom now it slides right out.

I also put hemp fiber in the other stash area so my extra tip doesn't bounce around so much.

I ended up ordering a carbon fiber Omni. The carbon fiber isnt my first choice for looks but I'm hoping it's easier to swap tips with. On the plus side it's probably the best match for the dark wenge dynastash.

Now I can relax till I get a super custom diamond pimped out XL VC. I wish I had the tools to make my own stems.

 

[in8won]

HI All, I purchased a ti-woody and it shipped yesterday. I can't wait to try it out. I have been vaping since the beginning of December and I started with a ssv. I love my ssv but I am looking forward to a more portable option.

 

[Squiby]

@in8won

Congratulations on getting off the smoke and into vapor! I hope you love your new Woody and that you will share pics and your impressions with us when it comes.

 

[little maggie]

I can't agree more! I find I grab Omni 9 out of 10 times these last days. Project and Mi are having a break. Omni is so much smoother indeed. Mouthpulls or straight to lung it rocks! Sometimes I prolong my sessions by aiming high on the cap and have about 8-10 low temp, amazing flavoured hits but most of the time is 3-4 hits by aiming lower!


I have tried VC with VG on cotton and hemp and while it worked it wasn't so satisfying. I am sure tanks do a better job... Good luck with your break!

Are you using one of the newer omnis? I have one of the early ones and have never managed to get it to work well. No matter how I try to set it I can't get the airflow smooth. I have several other VCs so I just never use the omni.

More info in the shed for how the Twists are done, Purpleheart, Thuya, Padauk, Thuya and Purpleheart.

More Padauk coming, it turned out so well. Rich colours.

I am so tempted to buy one of these. I wish the shipping was less expensive. I have too many bodies for the # of vapcap "innerds" I own and can't even use them all. But the one I always reach for first is the long stemmed one you made.

 

[natural farmer]

Are you using one of the newer omnis? I have one of the early ones and have never managed to get it to work well. No matter how I try to set it I can't get the airflow smooth. I have several other VCs so I just never use the omni.

It's one of the new ones... No problem with airflow as I keep the carb fully closed most of the time anyway. The old tip has less airflow so it needs stronger mouthpulls while with the new I can lung-pull as well, restricted but satisfying!

 

[SSVUN~YAH]

Loving these Omni's so much! The Mighty is only getting a few uses daily now and the Errlectric typically only when company is over. Tonight I started with these two beauties:

Ended up adding the Y adapter and rotated all three OV's...
So glad I joined this great FC/VC family!

 

[Lookatmeglow]

@SSVUN~YAH how many pieces of glass do you own? Each one I have seen is just beautiful.

 

[Winegums]

Since I know you guys love some good wood. Here's the latest off the lathe.

 

[Lookatmeglow]

@Winegums, how did you know I like wood? That's private.

However, your wood looks breathtaking! Do those fit standard Ti Woodie models or omnivap models?

 

[Winegums]

@Winegums, how did you know I like wood? That's private.

However, your wood looks breathtaking! Do those fit standard Ti Woodie models or omnivap models?

They will fit standard Ti tips and condensers. I don't have an Omni so I can't comment on that.

 

[Lookatmeglow]

Are those tapered to fit a 14mm or 18mm female connection? Or are they just very pretty functional mouthpiece/stems?

 

[Winegums]

Are those tapered to fit a 14mm or 18mm female connection? Or are they just very pretty functional mouthpiece/stems?

These last few were designed to fit a 14mm female and seal very well in the joint. My first pieces did an okay job of it but this batch is much better.

 

[flotntoke]

Since I know you guys love some good wood. Here's the latest off the lathe.

GORGEOUS!!! Think your lovely wood may have given me a little wood.

 

[Ricardo]

And the mighty VapCap Nation marches on! I think there's a way to create a survey on these forums but I don't know how to do it. I was wondering how many of the Vaptized started with the basic OS VapCap and upgraded compared to how many jumped straight in and ordered Omnis, Woodys, DynaStash etc....?

 

[TheVaporist]

@TheVaporist beautiful pic! You are a talented photographer!

Thanks a lot that means a lot to me!

Thank you @TheVaporist , you are a true gentleman, very Classy!I'm not a big fan of the shiny ti body but this matte finish is very mysterious and alluring, the burl tip completes the sexy ensemble. You are a master, the lighting in all your shots is top notch!

Thank you for your kind words, I always try to do my best, learn and hope to get better. But I ain't a master, just a humble man, Doisneau, Cartier-Bresson, Hamilton... These are some of the few masters out there

Back on topic, I wasn't a fan if the shiny body too, back in July because current modern design is way better, so I had asked George if he can do a sandblasted one, then drill the hexahelis design on it when it's sanded, this add some light in the design and contrast well with the shiny mouthpiece and tip. I don't have to say that I really love it! With the old tip that's my concentrate vapcap
Obviously a big thanks to George for being so kind taking all sort of custom demands and wishes

Astonishing picture ! Kudos
Sooooo .. Is this a wooden Mp on an Omni Condenser, or just a standard SS condenser?

Thank you man! Always here to show the beauty in this little thing!
This is a standard ss condenser with a burl mouthpiece. But I would love to see a wood MP with a Ti threaded piece inside for the omnivap. It will add even more customization to the mix!

Loving these Omni's so much! The Mighty is only getting a few uses daily now and the Errlectric typically only when company is over. Tonight I started with these two beauties:

Ended up adding the Y adapter and rotated all three OV's...
So glad I joined this great FC/VC family!

This piece is mesmerizing, a real elegant piece. Learning and experimenting is the best part of it! The other best part is this little peaceful island called the Dynavap's thread

 

[Godspeed]

I have only been partaking in cannabis for a little over a month since I received my medical card, and below are my current instruments. I just received the VapeXhale EVO a few days ago, and while it is a phenomenal unit, I believe it is overkill for a novice like myself who barely uses .025g over the period of an entire day.

In my first attempt at using the EVO, I loaded .025 in the basket and planned to take one inhalation and then remove the basket until later in the day. However, the vapor was so cool and smooth, and there was very little restriction as I inhaled (unlike the Firefly2 or OmniVap), the entire .025g was perfectly vaporized in one shot and my brain was launched into the stratosphere. This was not a pleasurable experience for me.

The Firefly2 works well for microdosing as long as I place a concentration pad on the materiel. Thankfully it has worked perfectly right out of the box but I am not too wild about having to stir after a toke or two, or that I need to utilize an app to change the temperature.

The OmniVap is great and currently my favorite of the three. I have the chamber reduced to 50% and am utilizing the degummed hemp fiber in the remaining 50% of the chamber sandwiched between two titanium screens. It is hands down the most portable and easiest to use. I purchased the Burl DynaStash, but if I am going out, I find that I am using the plastic tube it came in more often. A big thank you to Ms Squiby for the private tutoring on this stellar device!

 

[Chose]

I have only been partaking in cannabis for for a little over a month since I received my medical card, and below are my current instruments. I just received the VapeXhale EVO a few days ago, and while it is a phenomenal unit, I believe it is overkill for a novice like myself who barely uses .025g over the period of an entire day.

In my first attempt in using the EVO, I loaded .025 in the basket and planned to take one inhalation and then remove the basket until later in the day. However, the vapor was so cool and smooth, and there was very little restriction as I inhaled (unlike the Firefly2 or OmniVap), the entire .025g was perfectly vaporized in one shot and my brain was launched into the stratosphere. This was not a pleasurable experience for me.

The Firefly2 works well for microdosing as long as I place a concentration pad on the materiel. Thankfully it has worked perfectly right out of the box but I am not too wild about having to stir after a toke or two, or that I need to utilize an app to change the temperature.

The OmniVap is great and currently my favorite of the three. I have the chamber reduced to 50% and am utilizing the degummed hemp fiber in the remaining 50% of the chamber sandwiched between two titanium screens. It is hands down the most portable and easiest to use. I purchased the Burl DynaStash, but if I am going out, I find that I am using the plastic tube it came in more often. A big thank you to Ms Squiby for the private tutoring on this stellar device!

Wow that's an expensive just over a month you've had
Fair play
You have some high end gear there
I'd like to try the evo and ff2
But it all gets a bit expensive I have some control of my VAS
any way welcome to the club

 

[almost there]

I have only been partaking in cannabis for for a little over a month since I received my medical card, and below are my current instruments. I just received the VapeXhale EVO a few days ago, and while it is a phenomenal unit, I believe it is overkill for a novice like myself who barely uses .025g over the period of an entire day.

In my first attempt in using the EVO, I loaded .025 in the basket and planned to take one inhalation and then remove the basket until later in the day. However, the vapor was so cool and smooth, and there was very little restriction as I inhaled (unlike the Firefly2 or OmniVap), the entire .025g was perfectly vaporized in one shot and my brain was launched into the stratosphere. This was not a pleasurable experience for me.

The Firefly2 works well for microdosing as long as I place a concentration pad on the materiel. Thankfully it has worked perfectly right out of the box but I am not too wild about having to stir after a toke or two, or that I need to utilize an app to change the temperature.

The OmniVap is great and currently my favorite of the three. I have the chamber reduced to 50% and am utilizing the degummed hemp fiber in the remaining 50% of the chamber sandwiched between two titanium screens. It is hands down the most portable and easiest to use. I purchased the Burl DynaStash, but if I am going out, I find that I am using the plastic tube it came in more often. A big thank you to Ms Squiby for the private tutoring on this stellar device!

Hey @Godspeed, welcome to the vapcap Bermuda triangle. Those who get drawn into this thread hardly ever make it out so be warned
That's quite the fancy setup, I feel so outdated. Back when I was young I didn't even own a pipe till I went to college.

 

[phattpiggie]

(35mm - f3.2 - 1/160s - iso 100 - 6ml adrenaline)

Great shots again and thanks for posting the settings it's helping me understand my camera a bit more.

Those who get drawn into this thread hardly ever make it out so be warned

Why would you want to leave

 

[almost there]

Great shots again and thanks for posting the settings it's helping me understand my camera a bit more.


Why would you want to leave

Love the red stripes, reminds me of a Native American peace pipe

 

[Lookatmeglow]

Great shots again and thanks for posting the settings it's helping me understand my camera a bit more.


Why would you want to leave

You and @Winegums are killing me. Both of you have some amazing looking stems. I didn't expect to want more than a couple vapcaps, but I'm always reconsidering.